能力培养为导向的实践课程改革与设计     

刘亚文  王玥  段延松 《测绘通报》2020,(4):152-156

大学实践课程是培养学生创新、创业实践能力的重要环节，本文在新工科实验课程建设中，提出了以能力培养为导向的实践课程设计思路，旨在培养适应当今新技术、新产业、新模式快速变革时代的创新性工程科技人才。本文将传统的验证性实践课程调整为“目标设定、方案规划及实施”的设计型实验课程，强调学生在实践中的主体地位，遵循实践能力培养的规律，引导学生在实践中重参与、重思考、重实施、重过程。同时，将行业的最新发展、最新变革反映在实践教学课程中，增加了新型传感器及混合云人机协作数据处理平台，确保学生获取的知识和技术与快速发展的行业水平相接轨。本文以摄影测量实习课程改革为例，实践证明，课程的实施对于培养学生综合分析设计、创造性解决专业问题的能力取得了较好的效果。  相似文献   

Effect of different registration methods on precision of orientation based on RTK registration/georeferencing mode     

Shengming Hu  Zhijian Chen  Chenghui Wan  Chun Tang  Wen Xiong 《Marine Georesources & Geotechnology》2020,38(4):385-392

Abstract

Compared with traditional methods, the three-dimensional laser-scanning (3D-LS) technique can efficiently acquire many high-quality geometric properties of rock discontinuities. In practice, engineers usually prefer to simplify the processing by using single-station point data and roughly orienting owing to the complexity of registration/georeferencing multi-station point data. However, prior published studies have paid little attention to the accuracy and reliability when determining discontinuity orientations using 3D-LS. We propose a reliable and accurate method with robust on-site applicability. As part of an ongoing effort, we are evaluating the precision of the commonly used coarse registration method and the fine registration method, and promoted the optimized coarse- and fine-registration methods and evaluated their precision. It is found that: (1) the common and the optimized registration method can meet our project’s engineering requirements, and the optimized registration method improved accuracy in the dip direction by approximately 1°; (2) fine registration using an iterative closest point (ICP) algorithm can correct both dip direction and dip angle; and (3) the orientation is of high precision with commonly used coarse and fine registration, whereas the optimization effect to correct the orientation is slightly limited.  相似文献   

近场地震下竖向刚度不同的混合结构动力性能分析   总被引：1，自引：0，他引：1       下载免费PDF全文

马肖彤  包超  张立新  徐芳泽  陆华 《地震工程学报》2019,41(4):860-865

近场地震的动力特性明显不同于远场地震,因此有必要对结构在近场地震作用下的动力性能展开研究。以上部钢结构-下部混凝土结构这类竖向刚度不同的加层混合结构为研究对象,对其在近场脉冲型地震、近场无脉冲型地震及远场地震作用下的动力响应进行研究。结果表明:在多遇、设防、罕遇地震作用下,近场脉冲型地震会使结构的层间位移角、层间剪力、加速度等动力响应均放大并出现超限的情况,而且都比罕遇地震作用下结构的响应增大更明显;在进行近场区加层混合框架结构的设计和建设时,近场脉冲效应会使结构存在不满足规范的情况,有必要对竖向刚度不同的加层混合结构在近场区的适用性进行深入研究。  相似文献   

多通道瞬变电磁法频率域比值算法及视电阻率计算研究          下载免费PDF全文

张文伟  真齐辉  底青云 《地球物理学报》2018,61(10):4171-4181

视电阻率在电磁法勘探中起重要作用，可以作为初步解释结果，多通道瞬变电磁法通过大地脉冲响应的峰值时刻定义视电阻率.鉴于传统方法计算峰值时刻视电阻率需要恢复完整大地脉冲响应，本文通过研究大地脉冲响应及其频谱特征，提出一种新的频率域比值法.利用参考谱及其与一般谱的伸缩因子计算一般谱的峰值时刻，进而得到视电阻率.该方法只需大地脉冲响应单个频点幅度谱，从而不用估计整个大地脉冲响应.实际计算时，可以用大地脉冲响应多个频点幅度谱得到平均视电阻率.模拟数据与实测数据结果表明，在一维介质中，频率域比值法可以得到合理的视电阻率.  相似文献   

Rutile inclusions in garnet from a dissolution‐reprecipitation mechanism     

Shyh‐Lung Hwang  Pouyan Shen  Hao‐Tsu Chu  Tzen‐Fu Yui  Yoshiyuki Iizuka  Hans‐Peter Schertl 《Journal of Metamorphic Geology》2019,37(8):1079-1098

Metamorphic garnet commonly contains needle‐like rutile inclusions as well as equant rutile inclusions that surround quartz inclusions and range in size from submicrometer to nanometer. Although the origin of these equant rutile inclusions, that is, exsolution or non‐exsolution, has important implications for petrological and tectonic processes, the crystallographic characteristics of these inclusions have rarely been studied because of the small sizes and analytical difficulties involved. Here, we report the crystallographic characteristics pertinent to the genetic origin of minute equant rutile inclusions in cloudy, nearly spherically shaped garnet domains with Ti‐depleted compositions surrounding quartz inclusions in ultrahigh‐pressure garnet from several diamondiferous Erzgebirge quartzofeldspathic gneissic rock samples. TEM analyses show that the equant rutile crystals in cloudy garnet domains are partially bounded by the low‐energy {100}_rt ± {110}_rt ± {101}_rt facets and have rather random crystallographic orientation relationships (CORs) with the garnet host, with preferential alignment of low‐energy lattice planes, for example, {100}_rt//{112}_grt, for some rutile crystals. Although the rather random CORs are unlikely to be attributed to solid‐state exsolution subjected to the stringent topotactic garnet lattice constraints, the characteristic subhedral {100}_rt ± {110}_rt ± {101}_rt crystal forms of rutile can be rationalized by a metasomatic dissolution‐reprecipitation mechanism via a fluid phase. In this scenario, the quartz+fluid inclusions in garnet were first subjected to decompression microcracking during rock exhumation, followed by dissolution of Ti‐bearing garnet matrix at the crack tips or along the crack surfaces and subsequent reprecipitation of rutile, apatite, gahnite, akdalaite, and Ti‐depleted garnet. The rapid coalescence between rutile and garnet crystals in fluid or direct attachment of rutile crystals onto the dissolving crack surfaces would then yield the rather random CORs as reported here. These results, along with previous work on rutile needles, indicate rather diverse genesis of rutile inclusions in various crystal forms, thus shedding light on the controversial exsolution origin for other inclusion suite/microstructure in minerals.  相似文献   

Inter‐laboratory Characterisation of Apatite Reference Materials for Chlorine Isotope Analysis     

Alicja Wudarska  Ewa S&#x;aby  Michael Wiedenbeck  Jaime D. Barnes  Magali Bonifacie  Neil C. Sturchio  Grard Bardoux  Frdric Couffignal  Johannes Glodny  Linnea Heraty  Timm John  Christof Kusebauch  Sathish Mayanna  Franziska D. H. Wilke  Ewa Deput 《Geostandards and Geoanalytical Research》2021,45(1):121-142

Here we report on a set of six apatite reference materials (chlorapatites MGMH#133648, TUBAF#38 and fluorapatites MGMH#128441A, TUBAF#37, 40, 50) which we have characterised for their chlorine isotope ratios; these RMs span a range of Cl mass fractions within the apatite Ca₁₀(PO₄)₆(F,Cl,OH)₂ solid solution series. Numerous apatite specimens, obtained from mineralogical collections, were initially screened for ³⁷Cl/³⁵Cl homogeneity using SIMS followed by δ³⁷Cl characterisation by gas source mass spectrometry using both dual‐inlet and continuous‐flow modes. We also report major and key trace element compositions as determined by EPMA. The repeatability of our SIMS results was better than ± 0.10‰ (1s) for the five samples with > 0.5 % m/m Cl and ± 0.19‰ (1s) for the low Cl abundance material (0.27% m/m). We also observed a small, but significant crystal orientation effect of 0.38‰ between the mean ³⁷Cl/³⁵Cl ratios measured on three oriented apatite fragments. Furthermore, the results of GS‐IRMS analyses show small but systematic offset of δ³⁷Cl_SMOC values between the three laboratories. Nonetheless, all studied samples have comparable chlorine isotope compositions, with mean 10³δ³⁷Cl_SMOC values between +0.09 and +0.42 and in all cases with 1s ≤ ± 0.25.  相似文献   

Prediction of application scope of vertical fracture strike based on scattered wave fracture orientation function     

TANG Yufei  LIU Yuwei  LIU Xiwu  YANG Guodong 《世界地质(英文版)》2015,18(1)

Fracture system plays a very important role in the enrichment and accumulation of oil and gas in the reservoirs. Based on scattering wave information,Fracture Orientation Function( FOF) was built,which can be used to predict the fracture orientations. However,this method has only been verified by physical experiments without studies on the application scope. In this study,based on the linear sliding theory,FOF of the scattering wave was applied to the numerical simulation and the application scope was further studied according to fracture flexibility tensor. According to the fractures filled with gas and liquid,numerical simulation was conducted on the models with various fracture flexibilities. Numerical simulation results were used to inverse fracture orientation with the aid of the FOF of the scattering wave. The results show that it is workable to predict the vertical fracture orientation with the FOF of the scattering wave. Application of this method is more effective when the fractures are filled with gas than liquid. Moreover,the application scope can be predicted by the fracture flexibility.  相似文献   

Feature detection and description for image matching:from hand-crafted design to deep learning     

Lin Chen  Franz Rottensteiner  Christian Heipke 《地球空间信息科学学报》2021,24(1):58-74

  相似文献   

岩质高边坡稳定性支持向量机预测方法研究     

缪宁 《云南地质》2011,30(4):487-489,475

提出一种基于支持向量机的岩质边坡稳定性预测方法。该方法地很好的表达了岩质边坡稳定性与其影响因素之间的非线性映射关系,并应用该方法建立了相应的模型。预测结果表明,利用该方法进行岩质边坡稳定性预测是可行的、有效的。  相似文献   

郴耒煤田马田矿区F_1断裂特征及深部找煤分析     

马文华  肖金成 《中国煤炭地质》2011,(6):5-8

马田矿区位于郴耒煤田中部,含煤地层为二叠系上统龙潭组,主采煤层为61和62煤。马田推覆断裂F1对马田矿区的含煤地层起着控制、改造和破坏作用。通过对以往地质资料的分析,认为F1断层向区内深部延展,下盘仍保留有龙潭组上段的主要可采煤层61和62煤,在矿区西部庙嘴岭背斜南端寿福寺附近,煤层埋深相对较浅,可作为资源勘查的重点区域;勘查手段宜先采用地震勘查,寻找煤层埋藏较浅区段,再用钻探验证。  相似文献