海上风电升压站平台高程确定标准的合理性研究     

潘晓春 《海洋技术学报》2019,38(6):83-88

为保证海上风电升压电站建设的经济合理与安全可靠,合理确定海上风电升压电站平台高程十分必要。文中从波浪与潮位的遭遇组合、最大波高取值与现行相关标准的比较、最大波峰高度计算的合理性等方面,全面分析了确定海上风电升压站平台高程各组成项取值标准的合理性,研究认为现行标准明显偏高。建议海上升压站平台底部高程按"100年一遇极端高水位+重现期50年波列累积频率1%的最大波峰高度+安全超高"确定。结合工程实例计算分析,按本文建议可使海上升压站平台高程明显降低,从而节省工程造价,还可减轻升压站工程对周边风机的遮蔽影响,以达到多发电量的效果。  相似文献   

近断层速度脉冲与震源机制的关系浅析   总被引：1，自引：1，他引：0  

罗全波  陈学良  高孟潭  李宗超  李铁飞  张振 《震灾防御技术》2018,13(3):646-661

本文初步分析了近断层速度脉冲的成因和特点，主要包括方向性效应与滑冲效应，并通过中国台湾集集地震的脉冲记录，分析了断层破裂方向和位移大小等震源参数对脉冲强度的影响。此外，基于有限移动源理论，说明了断层辐射与速度脉冲分布的关系，并探讨了利用运动学震源模型研究近断层地震动对速度脉冲影响的技术路线；评述了7种典型的等效速度脉冲模型，建议进一步研究等效速度脉冲函数与震源机制之间的关系。最后，简述了不同类型的断层引起速度脉冲的差异，并推测了产生脉冲型地震动的下限条件，同时展望该研究在地震预警方面的可能性。  相似文献   

Analytical study of ground motion caused by seismic wave propagation across faulted rock masses          下载免费PDF全文

J.C. Li  N.N. Li  S.B. Chai  H.B. Li 《国际地质力学数值与分析法杂志》2018,42(1):95-109

Studying seismic wave propagation across rock masses and the induced ground motion is an important topic, which receives considerable attention in design and construction of underground cavern/tunnel constructions and mining activities. The current study investigates wave propagation across a rock mass with one fault and the induced ground motion using a recursive approach. The rocks beside the fault are assumed as viscoelastic media with seismic quality factors, Q_p and Q_s. Two kinds of interactions between stress waves and a discontinuity and between stress waves and a free surface are analyzed, respectively. As the result of the wave superposition, the mathematical expressions for induced ground vibration are deduced. The proposed approach is then compared with the existing analysis for special cases. Finally, parametric studies are carried out, which includes the influences of fault stiffness, incident angle, and frequency of incident waves on the peak particle velocities of the ground motions.  相似文献   

强夯振动加速度的量测及现场试验研究   总被引：1，自引：0，他引：1       下载免费PDF全文

李盼盼  王家鼎  谷天峰  刘亚明 《地震工程学报》2018,40(1):166-170

结合延安新区强夯加固地基工程,进行强夯振动加速度测试现场试验。选取填方区场地,结合地形设计监测方案,以测试强夯波沿水平方向和斜坡的传播规律。在选定试验段的某级填方场地上布置多组加速度传感器,运用多个8通道24位高速采集卡记录强夯振动加速度在平面和斜坡的传播和衰减过程,探讨强夯振动波沿水平面和斜坡的传播规律以及能级对振动加速度的影响。结果表明:径向和竖向加速度值均随与夯点距离的增大而减小;在与夯击点距离相同处,强夯振动波沿水平方向传播的径向和竖向加速度值要大于沿斜坡方向;随着能级的增大,强夯产生的夯击波增强,在与夯击点相同距离处产生的径向和竖向加速度均明显增大。  相似文献   

RESEARCH ON PASSIVE SERVO SEISMIC ROTATIONAL ACCELERATION SENSOR WITH LARGE DAMPING     

QU Ming-zhe  GAO Feng  YANG Xue-shan  YANG Dong-xia 《地震地质》2018,40(5):1170-1178

Many strong motion records show that under the strong seismic vibration of, the torsional disfigurement of building structures is a common and serious damage. At present, there are no special sensors for measuring seismic rotation in the world. Most of the experts obtain rotational components through observing deformation, theoretical analysis and calculation. The theory of elastic wave and source dynamics also prove the conclusion that the surface of the earth will rotate when an earthquake occurs. Based on a large number of investigations and experiments, a rotational acceleration sensor was developed for the observation of the rotational component of strong ground motions. This acceleration sensor is a double-pendulum passive servo large-damped seismic rotational acceleration sensor with the moving coil transducer. When an earthquake occurs, the seismic rotational acceleration acts on the bottom plate at the same time. The magnetic circuit system and the middle shaft fixedly connected to the bottom plate follow the bottom plate synchronous vibration, and the moving part composed of the mass ring, the swing frame and the moving ring produces relative corners to the central axis. The two working coils mounted on the two pendulums produce the same relative motion with respect to the magnetic gaps of the two magnetic circuits. Both working coils at this time generate an induced electromotive force by cutting magnetic lines of force in the respective magnetic gaps. The generated electromotive forces are respectively input to respective passive servo large damper dynamic ring transducer circuits and angular acceleration adjusting circuits, and the signals are simultaneously input to the synthesizing circuit after conditioning. Finally, the composite circuit outputs a voltage signal proportional to the seismic rotational acceleration to form a seismic rotational acceleration sensor. The paper presents the basic principles of the rotational acceleration sensor, including its mechanical structure diagram, circuit schematic diagram and mathematical models. The differential equation of motion and its circuit equation are derived to obtain the expressions of the main technical specifications, such as the damping ratio and sensitivity. The calculation shows that when the damping ratio is much larger than 1, the output voltage of the passive servo large damping dynamic coil transducer circuit is proportional to the ground rotation acceleration, and the frequency characteristic of bandpass is wider when the damping ratio is larger. Based on the calibration test, the dynamic range is greater than or equal to 100dB and the linearity error is less than 0.05%. The amplitude-frequency characteristics, the phase-frequency characteristics and their corresponding curves of the passive servo rotational acceleration sensor are acquired through the calculations. Based on the accurate measurement of the micro-vibration of the precision rotating vibration equipment, the desired result is obtained. The measured data are presented in the paper, which verify the correctness of the calculation result. The passive servo large damping rotational acceleration sensor has simple circuit design, convenient operation and high resolution, and can be widely applied to seismic acceleration measurement of earthquake or structure.  相似文献   

Application of a cascading filter implemented using morphological filtering and time–frequency peak filtering for seismic signal enhancement     

Yanping Liu  Zhengguo Yan 《Geophysical Prospecting》2020,68(6):1727-1741

Inspired by the idea of the iterative time–frequency peak filtering, which applies time–frequency peak filtering several times to improve the ability of random noise reduction, this article proposes a new cascading filter implemented using mathematic morphological filtering and the time–frequency peak filtering, which we call here morphological time–frequency peak filtering for convenience. This new method will be used mainly for seismic signal enhancement and random noise reduction in which the advantages of the morphological algorithm in processing nonlinear signals and the time–frequency peak filtering in processing nonstationary signals are utilized. Structurally, the scheme of the proposed method adopts mathematic morphological operation to first preprocess the signal and then applies the time–frequency peak filtering method to ultimately extract the valid signal. Through experiments on synthetic seismic signals and field seismic data, this paper demonstrates that the morphological time–frequency peak filtering method is superior to the time–frequency peak filtering method and its iterative form in terms of valid signal enhancement and random noise reduction.  相似文献   

A New Retracking Technique for Brown Peaky Altimetric Waveforms     

Fukai Peng 《Marine Geodesy》2018,41(2):99-125

A new Brown-Peaky (BP) retracker has been developed for peaky waveforms that usually appear within ～10 km to the coastline. The main feature of the BP is that it fits peaky waveforms using the Brown model without introducing a peak function. The retracking strategy first detects the peak location and width of a waveform using an adaptive peak detection method, and then estimates retracking parameters using a weighted least squares (WLS) estimator. The WLS assigns a downsized weight to corrupted waveform gates, but an equal weight to other normal waveform gates. The BP retracker has been applied to 4-year Jason-1 waveform (2002–2006) in two Australian coastal zones. The results retracked by BP, MLE4 and ALES retrackers have been validated against tide-gauge observations located at Burnie, Lorne and Broome. The comparison results show that three retrackers have similar performance over open oceans with the correlation coefficient (～0.7) and RMSE (～13 cm) between altimetric and tide-gauge sea levels for distance >7 km offshore. The main improvement of BP retracker occurs for distance ≤7 km to the coastline, where validation results indicate that data retracked by BP are more accurate (15–21 cm) than those by ALES (16–24 cm) and MLE4 (19–37 cm).  相似文献   

黄土河谷场地地形放大效应的研究     

王良  卢育霞  马林伟  孔德政 《大地测量与地球动力学》2018,38(2):167-171

使用黄土河谷场地模型对地震动峰值加速度和频谱特征进行研究。结果表明，不同工况下各观测点PGA的放大比呈现出不同的变化规律。分析山顶和山谷各点的傅里叶谱以及谱比发现，在地形和土层共同作用下的放大效应是各自单独作用下放大效应的乘积。  相似文献   

基于蓝牙定位的老年人室内跌倒监护系统设计     

赵帅豪  王坚 《北京测绘》2020,(3):333-337

随着全球老龄化的加剧,老年人口的增多,老年人的健康监护已经成为了重要的社会问题。因身体机能的下降,老年人发生跌倒的概率非常高,而老年人一天中大约90%的时间是处于室内,针对老年人室内意外跌倒的医护救治,设计了一款基于蓝牙定位的老年人室内跌倒监护系统。该系统通过集成的传感器采集加速度、角速度、室内位置、人体生理信息等数据,并通过计算分析实现了跌倒监测报警功能。  相似文献   

Attenuation Characteristics of Earthquake Ground Motion for Large Volume Airgun     

CAI Huiteng  CHEN Yong  JIN Xing  XU Yihe  LI Wen 《中国地震研究》2019,33(4):544-556

In order to further deepen the understanding of seismic wave propagation characteristics induced by the large volume airgun source, experimental data from multiple fixed excitation points in Fujian Province were used to obtain the equivalent single excitation high signal-to-noise ratio velocity and displacement records through linear stacking and simulation techniques. Then the peak displacements of different epicentral distances were used to calculate the equivalent magnitude of the airgun source excitation at different fixed excitation points so as to establish the attenuation relationship between equivalent magnitude,epicenter distance and velocity peak. Our results show that:① Within 270 km of epicentral distance,for the large-volume airgun's single shot,the peak velocity range is about 700-4 nm/s,and the peak displacement range is about 200. 0-0. 2 nm;② The equivalent magnitude of the P-wave from the airgun source with a total capacity of 8,000 in 3 is 0. 181-0. 760,and the equivalent magnitude of the S-wave is 0. 294-0. 832. By contrast,the equivalent magnitude of the P-wave from the airgun source with a total capacity of 12,000 in 3 is 0. 533-0. 896,and the equivalent magnitude of the S-wave is 0. 611-0. 946. The S-wave energy is greater than the P-wave energy, and the excitation efficiency varies greatly with different excitation environment;③ The peak velocity increases with the equivalent magnitude,and decreases with the epicentral distance. The vertical component of the P-wave peak velocity is the largest among those three components,while the S-wave has the smallest vertical component and similar horizontal components. Hence,our research can provide an important basis for the quantitative judgment of the seismic wave propagation distance using the airgun and the design of the observation system in deep exploration or monitoring with airgun.  相似文献