排序方式： 共有11条查询结果，搜索用时 156 毫秒
1.
在无线网格网下提出一种通过提高发生拥塞的业务最大传输机会以缓解拥塞状况的拥塞策略,依据发送队列状态调整最大传输机会,增加拥塞节点中的拥塞业务的传输机会。对仿真数据分析结果表明网格网络的吞吐率、丢包率等重要网络性能都有明显改善,策略与IEEE802.11s草案中的拥塞机制相比,能够有效缓解网络拥塞,提高网络性能。 相似文献
2.
LXI是安捷伦公司和VXI科技公司联合提出的一种新型仪器接口规范,它最大的特点是基于以太网技术,可满足于组建网络化测试系统,是新一代总线标准的代表。介绍了LXI总线的产生以及技术特点,提出一种基于LXI总线协议的接口转换器的设计方案,详细说明了硬件的设计、触发方式的选择、接口驱动及模块间的通信。 相似文献
3.
论述了当前地震观测仪器采用的现场总线技术、数据通信方式以及数据汇集方法,并论述了将来地震观测仪器即将采用的现场总线技术、数据通信方式以及数据汇集方法。 相似文献
4.
High accuracy seamless positioning is required to support a vast number of applications in varying operational environments. Over the last few years, the global positioning system (GPS) has become the de facto technology for positioning applications. However, its performance is limited in indoor and dense urban environments due to multipath as well as signal attenuation and blockage. A number of techniques integrating GPS with other positioning technologies have been developed to address the limitations of standalone GPS in these difficult environments. While most of the developed techniques cover the outages of GPS in such environments, they do not provide acceptable performance, in terms of positioning accuracy, especially for some mission-critical (e.g. safety) applications. This paper proposes a tightly coupled (i.e. in the measurement domain) GPS/WiFi integration method which, in addition to addressing GPS outages, improves the overall positioning accuracy to the meter-level, thus satisfying the requirements of a number of location based services and intelligent transport systems applications. The performance of the proposed GPS/WiFi integration method is assessed for a number of scenarios in a simulation environment for an identified dense urban area in London, UK. 相似文献
5.
Response evaluation of interconnected electrical substation equipment using real‐time hybrid simulation on multiple shaking tables 
下载免费PDF全文
下载免费PDF全文 In an attempt to quantify the conductor cable effect on substation electrical equipment, real‐time hybrid simulation (RTHS) is conducted on interconnected equipment using two shaking tables. For this purpose, the existing RTHS system with advanced control capabilities at the Pacific Earthquake Engineering Research Center structural laboratory is enhanced to accommodate the simultaneous use of two shaking tables. An experimental parametric study is conducted to investigate the conductor cable effect using this system with a two‐table RTHS setup. Post insulators of disconnect switches, important components of substations that are usually tested with conventional methods for evaluating their seismic performance, are utilized as experimental substructures for realistic representation of the electrical equipment. Various global and local response parameters, including accelerations, forces, displacements, and strains, are considered to evaluate the effect of the tested conductor cable configuration for a wide range of support structure configurations, which are modeled in the computer as analytical substructures. The experimental parametric study results indicate that the conductor cable has a significant effect on the response of the interconnected equipment over the whole range of investigated support structures and needs to be explicitly considered for seismic testing of electrical equipment. Copyright © 2016 John Wiley & Sons, Ltd. 相似文献
6.
万兆以太网的应用越来越普遍,随着海量数据传输的需求与网络技术的不断发展,万兆以太网将逐步取代千兆以太网成为网络骨干。在介绍万兆以太网与VSS技术的基础上,结合北京市气象局网络建设的实例,探讨基于VSS技术的万兆以太网设计与实现。 相似文献
7.
针对传感器发展现状、特点及应用,利用STM32微控制器与轻量级TCP/IP协议栈结合的方式实现了传统传感器的智能化,并利用在程序中编程技术实现了传感器电子数据表格TEDS(Transducer Electronic Data Sheets)的在线更新。一方面实现了传统传感器的智能化,使其能够自动识别、即插即用,并支持在线更新与升级,另一方面实现了传感器的网络化,方便传感器的远程访问与控制。 相似文献
8.
9.
为确保IEEE 1588v2能够顺利建立起基于全网的主从时钟体系,通过对最佳主时钟算法关键参数的介绍和工作原理的分析,总结了在实现过程中的关键要素,并给出一套完善的实现方法.经测试,按照该方法实现的最佳主时钟算法,可以有效抵御外部因素的干扰,及时处理网络中出现的异常情况,顺利完成时钟源的选取工作. 相似文献
10.
IEEE—488接口总线,是计算机与外部设备、仪器连接的通用标准并行接口,它要求被连接的仪器具有EEEE—488标准的接口。本文讨论,如何把它与非IEEE—488标准的仪器接口相连接。 首先,要研究非标准的仪器接口,找出它与IEEE—488标准的异同。必要时,应改焊此仪器的接口插头线端,使那些主要信号线功能与IEEE—488要求一致的线端处于与IEEE—488插口线端对应的位置,而功能不相容者不用。然后,试运行IEEE—488接口卡上EPROM中已有程序。必要时,应把三线联络方式改为西线、一线或零钱联络,并根据卡上I/O芯片功能自编连接子程序。这对所用IEEE—488接口卡的功能是一种扩充。 本文具体介绍了用此方法如何将TCH—瞬态仪与APPLEⅡIEEE—488接口卡连接,构成一个较强功能的高速瞬态信号采集与处理系统。 相似文献