高强耐热铝合金钻杆材料优选          下载免费PDF全文

梁健  尹浩  孙建华  李亚红  王成彪  张金昌 《探矿工程》2020,47(4):65-71

铝合金钻杆的使用性能是制约深部钻探技术发展的“瓶颈”。本文综合考虑孔内工况因素和钻杆性能因素，以钻柱组合设计为基础准则，从特深孔钻探工程技术需求出发，开展了高强耐温铝合金钻杆材质选择和评价的试验研究。试验结果表明：2219铝合金固溶时效制度分别为535 ℃/1 h、165 ℃/20 h，2618铝合金固溶时效制度分别为530 ℃/1 h、200 ℃/20 h；2219铝合金在高温长时间暴露后的室温力学性能优于2618铝合金，在高温瞬时条件下的力学性能劣于2618铝合金；2219铝合金中含有Zr，该元素在热暴露过程中起到减缓溶质扩散速率的作用，这对提高热暴露后的剩余强度是有利的。  相似文献   

Lead isotope evolution of the Central European upper mantle:Constraints from the Bohemian Massif     

《地学前缘(英文版)》2020,11(3):925-942

The Pb isotope composition of the upper mantle beneath Central Europe is heterogeneous due to the subduction of regionally contrasting material during the Variscan and Alpine orogenies.Late Variscan to Cenozoic mantlederived melts allow mapping this heterogeneity on a regional scale for the last ca.340 Myr.Late Cretaceous and Cenozoic anorogenic magmatic rocks of the Bohemian Massif(lamprophyres,volcanic rocks of basanite/tephrite and trachyte/phonolite series) concentrate mostly in the Eger Rift.Cretaceous ultramafic lamprophyres yielded the most radiogenic Pb isotope signatures reflecting a maximum contribution from metasomatised lithospheric mantle,whereas Tertiary alkaline lamprophyres originated from mantle with less radiogenic ~(206)Pb/~(204)b ratios suggesting a more substantial modification of lithospheric source by interaction with asthenosphericderived melts.Cenozoic volcanic rocks of the basanite/tephrite and trachyte/phonolite series define a linear mixing trend between these components,indicating dilution of the initial lithospheric mantle signature by upwelling asthenosphere during rifting.The Pb isotope composition of Late Cretaceous and Cenozoic magmatic rocks of the Bohemian Massif follows the same Pb growth curve as Variscan orogenic lamprophyres and lamproites that formed during the collision between Laurussia,Gondwana,and associated terranes.This implies that the crustal Pb signature in the post-Variscan mantle is repeatedly sampled by younger anorogenic melts.Most Cenozoic mantle-derived rocks of Central Europe show similar Pb isotope ranges as the Bohemian Massif.  相似文献   

进口爆破孔钻机配套钻塔的研制          下载免费PDF全文

张西坤  宋秋锋  申寿长  刘大仲  浦静怡  曹继玉  魏少军 《探矿工程》2021,48(6):80-86

进口DMH90型爆破孔钻机配套钻塔整体性强,起落塔快捷方便,钻塔高度满足不换杆一次成孔,即钻塔有效高度略大于钻孔深度,承受振动冲击力大,施工工作环境恶劣。基于这些特点和难点,爆破塔长期依赖进口,导致成本增高、周期加长,为此进行了进口DMH90型爆破孔钻机配套钻塔的替代进口研究工作。本文介绍了DMH90型爆破孔钻机配套ZT27-45型爆破孔钻塔的研制过程,主要对ZT27-45型爆破孔钻塔的设计要点、结构型式、塔体选材、焊接工艺、防止变形、消除应力、质量检验等方面进行了探索、试验和总结。生产施工实践表明,ZT27-45型钻塔制造质量达到了设计要求,满足爆破孔施工的需要,实现了替代进口,达到了降低成本、缩短工期和提高机械性能的目的。  相似文献   

广东龙门上仓铅锌矿成矿特征及成矿规律研究          下载免费PDF全文

古志宏 《江苏地质》2011,35(2):130-133

龙门上仓铅锌矿是广东省上仓式沉积改造型铅锌矿的典型矿床。通过对龙门上仓铅锌矿的矿床特征进行研究,综合前人的研究成果,归纳总结出该矿床的成矿要素,并且对矿床的成矿模式进行了初步探讨。研究表明,由大赛坝组构成槽部的开阔向斜以及南西翼帽子峰组层间破碎带构成的控矿构造是该矿的必要成矿要素。矿床成因属于岩浆热液—沉积改造型。  相似文献   

氧分压对Ni-Cr-Fe合金氧化成膜特性影响的研究     

李厚敏  初蕾  刘英才  梁丹维 《中国海洋大学学报(自然科学版)》2011,(Z1):267-271

以铸态Ni-Cr-Fe合金为试样,于1 050℃湿氢气氛下恒温氧化20 h。通过氧化增重、SEM/EDS以及薄膜X-射线衍射等方法研究了氧分压对该合金在弱氧化性气氛下氧化成膜特性的影响。结果表明:表面氧化膜从外到内氧化物组成依次为:MnCr2O4、Cr2O3以及SiO2。氧化膜的厚度、组成及形貌与体系的氧分压密切相关,中等氧分压(15.9×10-18atm)有利于表面尖晶石的形成;较低氧分压有利于形成厚而多孔的氧化膜,而高氧分压则趋向于形成薄而致密的氧化膜。  相似文献   

新疆尼勒克县喀英迪地区铅锌矿地质特征及成因     

姚德刚  赵环金  贺业峰 《山东国土资源》2011,27(9)

喀英迪铅锌矿主要产于早石炭世阿克沙克组及其与晚奥陶世呼独克达坂组的接触带上。通过普查工作共圈定15个铅锌矿体。其中主要矿体4个,Ⅰ-4矿体处于晚奥陶世呼独克达坂组灰岩与早石炭世阿克沙克组的不整合接触面上及其两侧,工程控制总长度为523m,最大斜深100m。倾向70°～100°,倾角一般20°～50°,连续性较好。该矿体铅单工程厚0.86～5.64m,平均2.86m,厚度变化系数为70.57%;锌单工程厚0.80～5.64m,平均1.81m,厚度变化系数为93.97%,属于变化较稳定型矿体。铅单工程品位0.62%～16.47%,平均4.53%,品位变化系数114.34%;锌单工程品位0.53%～12.37%,平均3.78%,品位变化系数57.47%。属于有用组分分布较均匀型矿体。通过对矿床地质特征的研究,认为该矿床属沉积岩容矿的、层控的、构造控制非岩浆型低温热液矿床。  相似文献   

新疆金山金矿床中Cu-Zn合金矿物的发现及其地质意义     

杨隆勃  刘家军  朱亿广  朱炳玉 《矿物学报》2011,31(1):1-8

在研究新疆金山金矿床物质组分的过程中,通过对矿石矿物进行反光显微镜下观察与电子探针分析,发现了Cu-Zn合金矿物。与国内外已发现的Cu-Zn合金矿物相比,所发现的Cu-Zn合金矿物中Cu含量(81.35%～85.36%,平均83.75%)较高,Zn含量(6.08%～10.10%,平均为7.39%)较低,并含少量的Sn(4.13%～6.75%,平均为5.23%)、Ni(0.88%～1.38%,平均为1.05%),属于为α相Cu-Zn合金矿物。Cu-Zn合金矿物在自然界极为罕见,其生成条件也很独特。结合金山金矿成矿特征和形成条件,作者认为该Cu-Zn合金矿物是在热液成矿晚阶段(第Ⅳ阶段)强还原条件下的缺氧、缺硫环境中形成的。  相似文献   

Optimal design of superelastic‐friction base isolators for seismic protection of highway bridges against near‐field earthquakes     

Osman E. Ozbulut  Stefan Hurlebaus 《地震工程与结构动力学》2011,40(3):273-291

The seismic response of a multi‐span continuous bridge isolated with novel superelastic‐friction base isolator (S‐FBI) is investigated under near‐field earthquakes. The isolation system consists of a flat steel‐Teflon sliding bearing and a superelastic NiTi shape memory alloy (SMA) device. The key design parameters of an S‐FBI system are the natural period of the isolated bridge, the yielding displacement of the SMA device, and the friction coefficient of the sliding bearings. The goal of this study is to obtain optimal values for each design parameter by performing sensitivity analysis of a bridge isolated by an S‐FBI system. First, a three‐span continuous bridge is modeled as two‐degrees‐of‐freedom with the S‐FBI system. A neuro‐fuzzy model is used to capture rate‐ and temperature‐dependent nonlinear behavior of the SMA device. Then, a set of nonlinear time history analyses of the isolated bridge is performed. The variation of the peak response quantities of interest is shown as a function of design parameters of the S‐FBI system and the optimal values for each parameter are evaluated. Next, in order to assess the effectiveness of the S‐FBI system, the response of the bridge isolated by the S‐FBI system is compared with the response of the non‐isolated bridge and the same bridge isolated by pure‐friction (P‐F) sliding isolation system. Finally, the influence of temperature variations on the performance of the S‐FBI system is evaluated. The results show that the optimum design of a bridge with the S‐FBI system can be achieved by a judicious specification of design parameters. Copyright © 2010 John Wiley & Sons, Ltd.  相似文献   

Rhizofiltration of a Heavy Metal (Lead) Containing Wastewater Using the Wetland Plant Carex pendula     

Brijesh K. Yadav  Maarten A. Siebel  Johan J. A. van Bruggen 《洁净——土壤、空气、水》2011,39(5):467-474

Rhizofiltration is a subset technique of phytoremediation which refers to the approach of using plant biomass for removing contaminants, primarily toxic metals, from polluted water. The effective implementation of this in situ remediation technology requires experimental as well as conceptual insight of plant–water interactions that control the extraction of targeted metal from polluted water resources. Therefore, pot and simulation experiments are used in this study to investigate the rhizofiltration of a lead containing wastewater using plants of Carex pendula, a common wetland plant found in Europe. The metal contaminant extraction along with plant growth and water uptake rates from a wastewater having varying Pb concentration is studied experimentally for 2 wk. The temporal distribution of the metal concentration in the wastewater and the accumulated metal in different compartments of C. pendula at the end are analyzed using atomic absorption spectrometry. Parameters of the metal uptake kinetics are deduced experimentally for predicting the metal removal by root biomass. Further, mass balance equations coupled with the characterized metal uptake kinetics are used for simulating the metal partitioning from the wastewater to its accumulation in the plant biomass. The simulated metal content in wastewater and plant biomass is compared with the observed data showing a good agreement with the later. Results show that C. pendula accumulates considerable amounts of lead, particularly in root biomass, and can be considered for the cleanup of lead contaminated wastewaters in combination with proper biomass disposal alternatives. Also, the findings can be used for performing further non‐hydroponics experiment to mimic the real wetland conditions more closely.  相似文献   

φ71 mm绳索取心铝合金钻杆的研制   总被引：1，自引：1，他引：0       下载免费PDF全文

张喜超 《探矿工程》2015,42(7):58-61，71

介绍了国内外铝合金钻杆的研制现状,分析了绳索取心铝合金钻杆在地质钻探中的优势。对φ71 mm×5.5 mm绳索取心铝合金钻杆体与钢接头连接结构进行了详细设计。通过对试验钻杆进行静拉力、扭矩试验,得出了铝合金钻杆体与钢接头主要技术参数。  相似文献