内蒙古碾子沟钼矿床成矿流体来源、演化及成矿机理     

孙丰月  王睿  王一存  李顺达  王可勇  石开拓  孙清飞  王文元 《吉林大学学报(地球科学版)》2020,50(3):768-780

内蒙古自治区碾子沟钼矿床地处华北地台北缘西拉木伦钼成矿带西段，为一典型的中型石英脉型钼矿床。该钼矿床矿脉（体）主要产于燕山早期二长花岗岩-钾长花岗岩内NNW、NW向断裂构造体系之中，成矿作用过程经历了黄铁矿±辉钼矿＋石英（Ⅰ）、辉钼矿＋黄铁矿±黄铜矿＋石英（Ⅱ）、黄铜矿＋黄铁矿±闪锌矿＋石英（Ⅲ）及石英±方解石（Ⅳ）4个阶段。系统的流体包裹体岩相学、包裹体组分析、包裹体显微测温研究表明，矿床初始成矿流体为高温、中低盐度（490~550℃，盐度（w（NaC1））2%~10%，50~62 MPa）均匀的NaCl-H₂O体系热液，δ¹⁸O_H2O-SMOW（2.21‰）及δD_H2O-SMOW（-68.9‰）表明其主要来源于岩浆热液；成矿流体上升并不断汇聚于容矿断裂空间，伴随温度、压力降低（380~460℃，26~40 MPa→360~420℃，25~30 MPa）而进入两相不混溶区，流体开始发生沸腾→强烈沸腾作用，导致成矿元素Mo大量沉淀富集成矿，成矿晚期残余流体与大气降水混合（δ¹⁸O_H2O-SMOW为-2.41‰~2.51‰，δD_H2O-SMOW为-110.1‰~-105.5‰），矿床属燕山早期中高温岩浆热液型钼矿床。  相似文献   

硼的地球化学性质及其在俯冲带的循环与成矿初探   总被引：2，自引：1，他引：1  

林秋婷  陈晨  刘海洋 《岩石学报》2020,36(1):5-12

硼是广泛应用于化工、农业、材料科学及核工业领域的重要元素。硼与氢的核聚变反应是未来具备运用潜力的清洁能源。硼作为典型的亲石元素,是高度不相容元素。硼元素容易富集于蚀变洋壳及蛇纹石化地幔橄榄岩中。而在板块俯冲过程中,由于硼具有强的流体活动性,会优先赋存于流体中。因此,当蛇纹石化的大洋岩石圈及覆于其上的沉积物在俯冲过程中发生脱水,这使得弧前地幔楔发生大规模的蛇纹石化。此时大量硼元素很可能随俯冲流体释放并封存于弧前地幔楔中。目前已发现的超大型硼矿床主要位于聚合型板块边缘,尤其土耳其拥有世界上最大的硼酸盐储量。我们推测这些矿床的形成基础条件之一可能与弧前高度蛇纹石化的地幔楔有关。尤其是在洋 陆俯冲环境,弧前蛇纹岩或蛇绿混杂岩首先通过俯冲侵蚀再循环到火山弧岩浆中,使得岩浆更富集硼。随后弧火山喷发大量富硼的火山岩、岩浆热液及水气。在岩浆冷却过程中,硼元素析出、沉淀于火山表面,并伴随风化、侵蚀过程汇聚至碰撞造山带的封闭湖盆之中。此外,干冷的气候条件下也进一步促进了硼的成矿。我国具有形成大型、超大型硼矿的地质条件,应加大研究及探勘力度,并适当购买硼作为战略储备。  相似文献   

四川米易海塔地区混合岩型铀矿流体包裹体特征     

郭锐  陈友良  刘凯鹏  郑玉文  胡漾 《矿物学报》2020,40(2):137-148

混合岩型铀矿是康滇地轴上最有希望取得找矿突破的铀矿类型,海塔地区的铀矿化即是该类型铀矿的典型代表。本文针对区内的长英质脉矿石、富晶质铀矿石英脉矿石和含矿热液石英脉中的石英流体包裹体进行了研究。结果表明,海塔地区混合岩型铀矿的成矿作用可分为2个阶段:早期混合岩化热液成矿阶段为高温、中低盐度流体,流体包裹体均一温度集中在380~540℃,盐度变化范围为16.15%~23.18%NaCl eqv,是区内铀成矿的主要阶段;晚期热液叠加改造成矿阶段为中低温、低盐度流体,流体包裹体均一温度集中在140~220℃,盐度变化范围为5.56%~23.18%NaCleqv,是区内富铀矿的形成阶段。流体包裹体的气相成分测试表明,长英质脉矿石石英包裹体中以CH4、CO2为主,其次为H2O和N2;而富晶质铀矿石英脉及含矿热液石英脉石英包裹体中以H2为主,部分含有CO2、CH4、H2O。氢、氧同位素研究表明,早期混合岩化成矿阶段的成矿流体可能为岩浆水与变质水的混合,而晚期热液叠加改造成矿阶段成矿流体中可能有大气降水的加入。  相似文献   

滇东南南秧田钨矿床白钨矿原位Sr同位素对成矿的指示     

王忠强  李超  张定才  江小均  周利敏  严清高 《岩矿测试》2020,39(2):285-299

南秧田钨矿床位于滇东南老君山W-Sn矿集区,地处扬子地块和印支地块的结合部位,地质背景复杂并遭受了多期岩浆活动和区域变质事件,其成矿时代和成因一直存在争议。本文对矽卡岩型和长石-石英脉型白钨矿开展了年代学、原位微量元素、Sr同位素研究,分析了两类白钨矿年龄、成因以及物质来源的差异。结果表明,长石-石英脉内与白钨矿共生辉钼矿的Re-Os同位素等时线年龄为151.0±1.3Ma,明显晚于矽卡岩矿体年龄,属于后期成矿事件。矽卡岩型白钨矿的轻稀土富集、重稀土强烈亏损,Eu呈明显负异常(δEu=0.46),∑REE平均含量为65.60μg/g,Mo平均含量为240.16μg/g,Sr平均含量为883.43μg/g;长石-石英脉型白钨矿稀土呈Eu正异常(δEu=2.8)的平坦型,∑REE平均含量为194.40μg/g,Mo平均含量为16.01μg/g,Sr平均含量为129.26μg/g。以上两者微量、稀土元素含量的差别显示它们具有性质明显不同的流体来源,Eu异常指示矽卡岩型白钨矿形成于氧逸度较高的环境,长石-石英脉型白钨矿形成于还原性环境。矽卡岩白钨矿~(87)Sr/~(86)Sr值相对较低,并且比较均一,介于0.71319～0.71491之间,表明成矿流体主要来自岩浆热液;长石-石英脉型白钨矿~(87)Sr/~(86)Sr值较高且变化范围大,介于0.71537～0.72803之间,平均0.72079,呈现出变质流体特征。两种不同类型白钨矿Sr同位素都具有二元混合的特征,显示长石-石英脉型白钨矿对矽卡岩型白钨矿有叠加改造作用,成矿流体与围岩的强烈交代作用是白钨矿形成的关键。  相似文献   

Quantifying flow resistance in mountain streams using computational fluid dynamics modeling over structure-from-motion photogrammetry-derived microtopography     

Yunxiang Chen  Roman A. DiBiase  Nicholas McCarroll  Xiaofeng Liu 《地球表面变化过程与地形》2019,44(10):1973-1987

Flow resistance in mountain streams is important for assessing flooding hazard and quantifying sediment transport and bedrock incision in upland landscapes. In such settings, flow resistance is sensitive to grain-scale roughness, which has traditionally been characterized by particle size distributions derived from laborious point counts of streambed sediment. Developing a general framework for rapid quantification of resistance in mountain streams is still a challenge. Here we present a semi-automated workflow that combines millimeter- to centimeter-scale structure-from-motion (SfM) photogrammetry surveys of bed topography and computational fluid dynamics (CFD) simulations to better evaluate surface roughness and rapidly quantify flow resistance in mountain streams. The workflow was applied to three field sites of gravel, cobble, and boulder-bedded channels with a wide range of grain size, sorting, and shape. Large-eddy simulations with body-fitted meshes generated from SfM photogrammetry-derived surfaces were performed to quantify flow resistance. The analysis of bed microtopography using a second-order structure function identified three scaling regimes that corresponded to important roughness length scales and surface complexity contributing to flow resistance. The standard deviation σ_z of detrended streambed elevation normalized by water depth, as a proxy for the vertical roughness length scale, emerges as the primary control on flow resistance and is furthermore tied to the characteristic length scale of rough surface-generated vortices. Horizontal length scales and surface complexity are secondary controls on flow resistance. A new resistance predictor linking water depth and vertical roughness scale, i.e.  H/σ_z, is proposed based on the comparison between σ_z and the characteristic length scale of vortex shedding. In addition, representing streambeds using digital elevation models (DEM) is appropriate for well-sorted streambeds, but not for poorly sorted ones under shallow and medium flow depth conditions due to the missing local overhanging features captured by fully 3D meshes which modulate local pressure gradient and thus bulk flow separation and pressure distribution. An appraisal of the mesh resolution effect on flow resistance shows that the SfM photogrammetry data resolution and the optimal CFD mesh size should be about 1/7 to 1/14 of the standard deviation of bed elevation. © 2019 John Wiley & Sons, Ltd.  相似文献   

全球地磁感应测深数据三维反演   总被引：2，自引：0，他引：2       下载免费PDF全文

李世文  翁爱华  张艳辉  李建平  杨悦  唐裕  邹宗霖  李春成 《地球物理学报》2019,62(5):1908-1920

全球地磁感应测深能获得地幔转换带及下地幔上部的导电结构.但目前稀疏的地磁台站分布及部分台站的观测数据稳定性较差,影响了三维反演对地下电性结构的分辨力和反演可靠性.为此,区别于传统的L2-范数反演方法,本文提出并实现了基于L1-范数的地磁测深响应三维反演技术.在反演中,利用L1-范数度量数据预测误差,降低"飞点"数据的影响,将相关系数较小的C-响应估计也纳入反演数据中.三维正演模拟采用球坐标系下的交错网格有限差分法,反演采用有限内存拟牛顿法.文中利用指数概率密度分布函数构造非高斯噪声的合成数据,并采用棋盘模型对反演方法的可靠性进行了验证.之后,我们将本文提出的三维反演方法用于全球129个地磁观测台站的C-响应数据反演,结果表明在地幔转换带深部,中国东北地区为高导电异常,南欧和北非则均为高阻;夏威夷在900km以下为高导;菲律宾海及以东地区在转换带表现为明显的高阻,这些结果与前人研究结果一致.由于采用了更多的台站数据,我们的反演结果还发现一些新的异常:南美洲南端,转换带表现为明显的高导;澳大利亚东南部,地幔转换带深部,也存在一个明显的高导异常,这些异常分布和地震层析成像的低速区一致.因此,L1-范数三维反演能够充分利用全球C-响应数据信息,提高地磁测深对地球深部电性结构的分辨能力,更好的研究全球地幔电性结构.  相似文献   

STUDY FOR ABNORMAL VARIATIONS OF UNDERGROUND FLUID IN LIJIANG AREA,YUNNAN PROVINCE BEFORE LUDIAN M_S6.5 EARTHQUAKE IN 2014     

YANG Zhu-zhuan  DENG Zhi-hui  YANG Yue-wen  DENG Sheng-chang  LI Qing 《地震地质》2018,40(2):480-498

The study is based on the underground fluid observation data in Lijiang area, northwest Yunnan Province. The data include the water level and temperature in Dangxiao well and Jinjia well, and the ion measurements in Ganze spring. Combining with the data of regional hydrogeology, rainfall, well structures, and the geothermal gradient, we analyzed the variations of each measurement item before the Ludian M_S6.5 earthquake on August 3, 2014 and discussed the possible mechanism for the abnormal variations. The water levels of both Dangxiao well and Jinjia well are influenced by local rainfall, but the former shows hysteresis according to rainy seasons and is the long trend influence; while the latter shows synchronization between high water level and rainy season, indicating good connection between well water and shallow aquifer. The recharge water for Dangxiao well is in relatively low temperature, and the temperature sensor is located at the major connecting section between the well water and the aquifer; the water temperature variation is mainly affected by the discharge status and variation of water level. The Jinjia well is always in static level, and the temperature sensor is below the major connecting section between the well water and aquifer, so the water temperature is affected little by water level variations and in smooth fluctuation. The recharge source for Ganze spring can generally increase the contents of calcium and magnesium ions, so does the conductivity. The water level data of Dangxiao well since 2012 are decomposed with wavelet technique. The results, excluding such high-frequency components as the noise and the semidiurnal and daily wave components influenced by earth tide, are further processed with difference method in order to eliminate the trend effect. The results show that the relative change of water level is enhanced and in relatively rapid increase before the Ludian M_S6.5 earthquake; the corresponding water temperature values are high. The tendency of water level in Jinjia well displays descending, while the corresponding water temperature shows ascending. The content of calcium ion, magnesium ion, bicarbonate ion, and conductivity of Ganze spring are descending, while the content of fluoride ion is ascending. The abnormal variations of underground fluid in Lijiang area appeared in turns and were accompanied with minor earthquakes before Ludian M_S6.5 earthquake, which indicates enhancing of regional stress and increasing of fluid activity.  相似文献   

南海IODP 349航次基底玄武岩中碳酸盐岩脉的岩石学特征*     

许佳锐  陈毅凤  王宝云 《热带海洋学报》2018,37(6):63-73

国际大洋发现计划(International Ocean Discovery Program, IODP)349航次在南海东部次海盆和西南次海盆残留扩张脊附近的U1431和U1433站位首次钻取基底玄武岩, 通过对16块基底玄武岩内的碳酸盐岩脉薄片镜下观察以及激光拉曼光谱分析, 揭示碳酸盐矿物为方解石和文石, 为典型的洋壳低温热液蚀变次生矿物。U1431站位碳酸盐岩脉为独立的方解石脉、文石脉交替出现; 而U1433站位则存在方解石脉、文石脉和方解石-文石共生脉三种情况。此外, U1431站位在基底~42.1m处出现了平行的方解石脉和文石脉, 揭示U1431存在不同来源热液的多期活动, 即可能存在多次或多阶段不同的热液注入。U1431和U1433站位的碳酸岩脉中, 文石的矿物集合体形状基本一致, 呈块状、纤维状和放射纤维状; 而方解石存在差异, U1431的方解石以斑块状、块状、粒状和纤维状出现, 而U1433的方解石仅出现块状。U1431站位的碳酸盐岩脉的丰度明显高于U1433站位。这些均揭示U1431站位的低温热液活动强, 而U1433站位则相对弱。两个站位的热液活动不同很可能是由于区域地质环境的差异造成——U1431附近的巨大海山为其提供了热液补给, 而U1433远离热液的补给/渗漏点。  相似文献   

华南陆缘高热流区的壳幔温度结构与动力学背景          下载免费PDF全文

张健  王蓓羽  唐显春  董淼  艾依飞 《地球物理学报》2018,61(10):3917-3932

华南陆缘是我国重要的矿产、地热资源区.晚中生代以来，在太平洋板块西向俯冲，地幔热对流活动共同作用下，该区出现多期岩浆-热事件和大规模爆发式成矿作用.在前人研究基础上，本文利用地表热流观测资料、地震剪切波资料、重力位球谐系数，计算了壳-幔温度结构，分析了动力学背景.计算结果表明：华南陆缘东南沿海地带，地壳10 km以浅温度达200℃以上，居里点温度475℃，莫霍面平均温度550℃.地壳浅层较热，花岗岩中放射性元素衰变放热是地壳浅层地下水热活动的重要热源，但地壳总体温度不高，为"冷壳热幔"型热结构.地幔中，90 km深度，温度950~1250℃；120 km深度，温度1050~1400℃；150 km深度，温度1200~1450℃；220 km深度，温度1500~1700℃."热"岩石圈底界深度在110~150 km之间，西深东浅.岩石圈内，地幔应力场为挤压-伸展相间格局；岩石圈之下，地幔应力场为一个以南昌为中心、长轴NE-SW向的椭圆.分析认为，晚中生代以来，太平洋板块的西向俯冲，导致华南陆缘在区域性SE向地幔对流背景上叠加局域性不稳定热扰动，在175~85Ma期间，上地幔物质向上流动，形成不同的岩浆活动高峰期.同时，岩石圈地幔受俯冲洋壳流体的影响，含水量高，黏度小，在地幔流切向应力场作用下，岩石圈底界由西向东"波浪"状减薄.现今岩石圈之下仍具备地幔小尺度热对流温度条件，但除地表浅层外，地壳整体温度不高，岩石圈构造稳定.  相似文献   

Coordinative similitude law considering fluid‐structure interaction for underwater shaking table tests     

Zhong‐Xian Li  Kun Wu  Yundong Shi  Ning Li  Yang Ding 《地震工程与结构动力学》2018,47(11):2315-2332

Generally, when a model is made of the same material as the prototype in shaking table tests, the equivalent material density of the scaled model is greater than that of the prototype because mass is added to the model to satisfy similitude criteria. When the water environment is modeled in underwater shaking table tests, however, it is difficult to change the density of water. The differences in the density similitude ratios of specimen materials and water can affect the similitude ratios of the hydrodynamic and wave forces with those of other forces. To solve this problem, a coordinative similitude law is proposed for underwater shaking table tests by adjusting the width of the upstream face of the model or the wave height in the model test to match the similitude ratios of hydrodynamic and wave forces with those of other forces. The designs of the similitude relations were investigated for earthquake excitation, wave excitation, and combined earthquake and wave excitation conditions. Series of numerical simulations and underwater shaking table tests were performed to validate the proposed coordinative similitude law through a comparison of coordinative model and conventional model designed based on the coordinative similitude law and traditional artificial mass simulation, respectively. The results show that the relative error was less than 10% for the coordinative model, whereas it reached 80% for the conventional model. The coordinative similitude law can better reproduce the dynamic responses of the prototype, and thus, this similitude law can be used in underwater shaking table tests.  相似文献