屋盖悬挑端加固减振试验研究          下载免费PDF全文

韩淼  姜浩  杜红凯  韩蓉  孙猛 《世界地震工程》2020,(4):025-32

大跨网架屋盖挑檐部分风致响应较大，提出附加杆件、粘弹性阻尼器及粘滞阻尼器三种加固减振方法。设计制作正置四角锥体单元空间网架足尺子结构试验模型，基于带悬挑平屋盖风压分布风洞试验数据，对三种加固足尺子结构试验模型进行不同风向角下风荷载时程的加载。分析结构风致加速度与位移响应，结果表明:附加杆件加固后网架刚度增大，加速度响应增大，位移响应减小；附加粘弹性阻尼器，结构加速度与位移响应均降低；附加粘滞阻尼器，结构加速度响应减小，位移减小效果不明显。  相似文献   

波纹钢管铅阻尼器耗能性能分析研究          下载免费PDF全文

周云  吴胜 《世界地震工程》2020,(4):103-111

提出一种波纹钢管铅阻尼器，介绍了其构造、工作机理、布置形式及特点，采用ABAQUS软件，建立钢管阻尼器、波纹钢管阻尼器和波纹钢管铅阻尼器有限元模型，对其应力分布，传力路径和滞回性能进行模拟分析。结果表明:波纹钢管铅阻尼器耗能减震机理明确，工作性能和耗能性能稳定，滞回曲线饱满以及耗能能力强，具有良好的变形和延性，极限变形大；波纹钢管铅阻尼器通过在波纹钢管内设置铅芯使初始刚度、承载能力和耗能能力得到大幅度提高，既有效保持了波纹钢管的变形能力，又避免波纹钢管发生局部屈曲，使波纹钢管耗能能力得到充分发挥。波纹钢管铅阻尼器在1mm小位移下就可以进入耗能，而且很快进入稳定耗能状态，等效阻尼比稳定在0.3~0.4之间。  相似文献   

Dynamic loading tests and seismic response analysis of a stud-type damper composed of multiple friction units with disc springs     

Takeshi Sano  Kazutaka Shirai  Yasumasa Suzui  Yoshikazu Utsumi 《地震工程与结构动力学》2020,49(13):1259-1280

This paper presents an experimental study on the performance of a shear-sliding stud-type damper composed of multiple friction units with high-tension bolts and disc springs. A numerical evaluation of the response reduction effects achieved by the stud-type damper is also presented. In dynamic loading tests, the behavior of stud-type multiunit friction damper specimens was investigated. Three different full-scale damper specimens, which were composed of five, six, or seven friction units with two or four sliding surfaces, were incorporated into loading devices for testing. The stud-type friction dampers demonstrated stable rigid-plastic hysteresis loops without any remarkable decrease in the sliding force even when subjected to repetitive loading, in addition to showing no unstable behavior such as lateral buckling. The damper produced a total sliding force approximately proportional to the number of sliding surfaces and friction units. The total sliding force of the stud-type damper can thus be estimated by summing the contributions of each friction unit. In an earthquake response simulation, the control effects achieved by stud-type dampers incorporated into an analytical high-rise building model under various input waves, including long-period, long-duration and pulse-like ground motions, were evaluated. A satisfactory response reduction was obtained by installing the developed stud-type dampers into the main frame without negatively impacting usability and convenience in terms of building planning.  相似文献   

Self-centering friction spring dampers for seismic resilience     

Wei Wang  Cheng Fang  Yashuo Zhao  Richard Sause  Shuling Hu  James Ricles 《地震工程与结构动力学》2019,48(9):1045-1065

  相似文献   

混沌遗传算法在高层结构风振控制优化中的应用研究     

张雷  张永山  莊初立  汪大洋  蔡长青 《华南地震》2014,(2):19-24

将混沌遗传算法(Chaos Genetic Algorithm,简称CGA)引入高层结构的风振控制优化中,对采用黏弹性阻尼器来控制风振响应的高层结构进行参数优化;用Matlab语言编制了均布法、迭代法、简单遗传算法(Simple Genetic Algorithm,简称SGA)和混沌遗传算法的风振控制优化分析程序;对9个高层结构进行风振控制优化,对比了算法程序的计算效率以及无控、均布、迭代、SGA和CGA工况下的结构风振响应。研究结果表明:混沌遗传算法可以应用于高层结构风振控制优化之中;混沌遗传算法的计算效率比简单遗传算法最高提升了29%;经混沌遗传算法优化后,黏弹性阻尼器附加给结构的附加阻尼比与均布和迭代相比最高分别提高了61%和22%,CGA工况的顶层加速度响应与均布和迭代法相比最高分别减小了14%和12%。为高层结构风振控制优化研究提供了新思路,具有一定的理论价值和实际意义。  相似文献   

Identification of modal parameters of a 600-m-high skyscraper from field vibration tests     

Junwei Zhang  Qiusheng Li 《地震工程与结构动力学》2019,48(15):1678-1698

Accurate prediction of the dynamic responses of a high-rise building subjected to dynamic loads such as earthquake and wind excitations requires the information of its structural dynamic properties such as modal parameters including natural frequencies and damping ratios. This paper presents the identification results of the modal parameters based on field vibration tests on a 600-m high skyscraper. A set of tests, including ambient vibration test (AVT) and free vibration test (FVT), were conducted on the skyscraper to identify its modal parameters. Firstly, this paper presents and discusses the modal parameters of the skyscraper assessed by several identification methods applied to the AVT measurements. These methods include the wavelet transform (WT) method, the stochastic subspace identification (SSI) method, and the random decrement technique (RDT). Secondly, an active mass damper (AMD) system with total mass 1000 tons equipped into the skyscraper was used to excite the building for estimation of the modal parameters by FVT. Thirdly, this paper presents observations on the structural dynamic behavior of the skyscraper with the operation of the AMD system during a typhoon event. The field measurement results show that the AMD system functioned efficiently for suppression of the wind-induced vibrations of the skyscraper during the typhoon. This paper aims to further understand the structural dynamic properties of super-tall buildings and provide useful information for structural design and vibration control of future skyscrapers.  相似文献   

Lifecycle cost optimization of tuned mass dampers for the seismic improvement of inelastic structures     

Emiliano Matta 《地震工程与结构动力学》2018,47(3):714-737

The seismic performance of tuned mass dampers (TMDs) on structures undergoing inelastic deformations may largely depend on the ground motion intensity. By estimating the impact of each seismic intensity on the overall cost of future seismic damages, lifecycle cost (LCC) proves a rational metric for evaluating the benefits of TMDs on inelastic structures. However, no incorporation of this metric into an optimization framework is reported yet. This paper presents a methodology for the LCC‐optimal design of TMDs on inelastic structures, which minimizes the total seismic LCC of the combined building‐TMD system. Its distinctive features are the assumption of a mass‐proportional TMD cost model, the adoption of an iterative suboptimization procedure, and the initialization of the TMD frequency and damping ratios according to a conventional linear TMD design technique. The methodology is applied to the seismic improvement of the SAC‐LA benchmark buildings, taken as representative of standard steel moment‐resisting frame office buildings in LA, California. Results show that, despite their limited performance at the highest intensity levels, LCC‐optimal TMDs considerably reduce the total LCC, to an extent that depends on both the building vulnerability and the TMD unit cost. They systematically present large mass ratios (around 10%) and frequency and damping ratios close to their respective linearly designed optima. Simulations reveal the effectiveness of the proposed design methodology and the importance of adopting a nonlinear model to correctly evaluate the cost‐effectiveness of TMDs on ordinary structures in highly seismic areas.  相似文献   

多维地震作用下大跨空间结构的减震控制分析          下载免费PDF全文

赵祥  刘忠华  王社良  杨涛  展猛 《地震工程学报》2018,40(3):398-405

考虑到多维地震输入对网架结构的不利影响,基于形状记忆合金超弹性,研制出一种兼具自复位、高耗能及放大功能于一体的形状记忆合金复合黏滞阻尼器(Hybrid Shape Memory Alloy Viscous Dampers,简称HSMAVD),并通过试验研究该阻尼器在循环荷载作用下的力学性能;然后以平面四角锥网架模型为基础,将该阻尼器替换部分网架结构杆件,并分析该阻尼器减震控制效果。结果表明形状记忆合金与黏滞阻尼器复合后具有良好的协同工作能力,可有效发挥形状记忆合金的超弹性和黏滞阻尼器的速度相关特性,使其具有稳定的滞回性能和良好的耗能能力;采用阻尼杆件替换原杆件的方法既能对结构进行有效的减震控制,又不改变原有的结构形式,是一种优越的减震控制方法,并为HSMAVD被动控制系统在结构抗震中的实际应用提供新思路。  相似文献   

基于颗粒阻尼器的多鼓型古柱抗震性能研究     

周占学  于爽  郭帅  黄晓峥  周小龙 《震灾防御技术》2022,17(2):392-400

为保护地震作用下历史遗迹帕特农神庙多鼓石柱,提出将破损的石鼓替换为填充颗粒的空鼓,以减轻多鼓石柱动力响应。本文基于PFC3D与FLAC3D软件,实现了离散-有限耦合作用,模拟了附有颗粒阻尼器帕特农神庙多鼓型石柱,研究了颗粒阻尼器对帕特农神庙石柱的减震效果,并分析地震强度、频率、阻尼器位置等因素对减震效果的影响。研究结果表明,将颗粒阻尼器替换破损的空鼓,PFC3D与FLAC3D耦合计算结果与试验结果基本一致,减震效果显著,说明耦合分析方法研究颗粒阻尼器抗震性能具有较高的可靠性;地震强度不同时,分层颗粒阻尼器仍可较好地耗散能量;颗粒阻尼器对结构的减震性能受激励频率的影响显著,频率越高,减震效果越好;颗粒阻尼器布置在古柱中上部减震效果优于布置在古柱下部。  相似文献   

特高压互连电气设备减震性能振动台试验          下载免费PDF全文

程永锋  孟宪政  卢智成  刘振林  邱宁  马跃 《地震工程学报》2019,41(2):292-298

为研究铅金属减震器对特高压互连电气设备的减震效果,进行由硬管母线连接的特高压避雷器设备和电容式电压互感器设备组成的互连耦合体系的地震模拟振动台试验。通过白噪声扫频、抗震及减震试验,测定互连耦合体系抗震结构及减震结构的自振频率以及关键部位的应变、加速度响应。试验结果表明:抗震结构中避雷器设备的最大应变响应大于互感器设备,互连耦合体系中的避雷器设备属于易损设备;安装减震器后互连设备频率降低幅度较小,减震器基本不会影响电气设备的正常运行;安装减震器后互连耦合体系中的避雷器设备和互感器设备在较大峰值加速度地震波作用下,设备顶端加速度响应和最大应变响应均有较大幅度的降低,避雷器设备和互感器设备的最大应变响应的减震效率分别为75%和50%,减震效果显著,减震器的应用大幅提升了互连耦合体系的抗震能力。  相似文献