Crack nucleation in saturated porous media     

Luc Dormieux  Eric Lemarchand  Thomas Carlioz  Laurent Jeannin 《国际地质力学数值与分析法杂志》2020,44(5):553-574

Crack nucleation has been the subject of important contributions in the last two last decades. However, it seems that few attention has been granted to the case of saturated porous media. This is the question addressed in the present paper which is devoted to nucleation in traction mode. From a physical point of view, nucleation is a sudden phenomenon, so that the material response is both adiabatic and undrained. In the spirit of the variational approach, the nucleated crack is viewed as the final state of a region of space in which the material undergoes a full damage process. In traction mode, the opening of a saturated crack in undrained condition induces a drop of fluid pressure. In case of low fluid compressibility, the presence of the fluid delays the brittle failure usually associated with nucleation, as long as the fluid pressure remains above the saturation vapor pressure. Nucleation is therefore possible only if a partial vaporization of the fluid takes place.  相似文献   

Implementation of a coupled plastic damage distinct lattice spring model for dynamic crack propagation in geomaterials          下载免费PDF全文

Chao Jiang  Gao‐Feng Zhao 《国际地质力学数值与分析法杂志》2018,42(4):674-693

This paper studies dynamic crack propagation by employing the distinct lattice spring model (DLSM) and 3‐dimensional (3D) printing technique. A damage‐plasticity model was developed and implemented in a 2D DLSM. Applicability of the damage‐plasticity DLSM was verified against analytical elastic solutions and experimental results for crack propagation. As a physical analogy, dynamic fracturing tests were conducted on 3D printed specimens using the split Hopkinson pressure bar. The dynamic stress intensity factors were recorded, and crack paths were captured by a high‐speed camera. A parametric study was conducted to find the influences of the parameters on cracking behaviors, including initial and peak fracture toughness, crack speed, and crack patterns. Finally, selection of parameters for the damage‐plasticity model was determined through the comparison of numerical predictions and the experimentally observed cracking features.  相似文献   

考虑劣化屈服老化裂纹后混凝土水库堤坝排水边坡抗震性研究          下载免费PDF全文

石晶  李伟 《地震工程学报》2019,41(6):1506-1513

针对在水库堤坝排水边坡混凝土裂纹的抗震性研究中,未考虑岩土体抗剪强度参数的劣化屈服效应以及混凝土裂纹的老化,存在抗震性判断结果准确率较差等问题,提出水库堤坝排水边坡混凝土考虑老化后产生裂纹的抗震性能研究方法。模拟强震下边坡混凝土的开裂破坏过程,根据D-P屈服准则,实现对闸墩混凝土材料的屈服判断。采用薄层整体单元模拟和分离式裂纹单元,实现混凝土裂纹的数值模拟,加载地震波后,获取混凝土裂纹的强震响应规律与破坏特征。实验结果可知,本文方法对坝体位移变化的研究精度高,得到的混凝土裂纹扩展范围更为准。运用本文方法对水库堤坝排水边坡混凝土的抗震性研究准确率以及可信度较高,说明本文方法具有一定的可取性。  相似文献   

内含裂隙角的恐龙化石轴向受压数值试验及裂纹扩展机理研究          下载免费PDF全文

杜圣贤  陈军  于学峰  贾超  张尚坤  宋香锁  罗文强 《山东国土资源》2019,35(5)

面临众多古生物化石遭受风化破坏的现实,恐龙化石保护是一项世界性难题。化石的风化原因多种多样,其中化石内部裂隙是导致恐龙化石风化、破坏的重要因素。该文以岩石断裂力学为理论依据,模拟分析内含裂隙的恐龙化石在压力作用下的破坏情况。通过数值模拟的方法,进行了内含裂隙恐龙化石数值压缩试验,并对内含裂隙的恐龙化石裂纹扩展机理进行了研究。研究结果表明,随着裂隙角度增大,开裂角逐渐减小,裂隙处特别是两端应力集中,其他部位应力较低、分布均匀;裂纹扩展是从裂纹尖端起裂,最终裂纹扩展到边缘。此研究结果为揭示恐龙化石风化机理和开展保护提供了基础参考资料。  相似文献   

山东蒙山与四川海螺沟冰川擦痕特征对比及成因分析   总被引：1，自引：0，他引：1       下载免费PDF全文

王照波  王江月 《山东国土资源》2019,35(6)

冰川擦痕在冰川遗迹的判断中具有极为重要的意义,其中以槽谷岩壁擦痕与冰碛砾石擦痕最为明显。槽谷岩壁擦痕具有细长密集、近似平行的特征;冰碛砾石擦痕具有短粗稀疏、方向杂乱的特征。除此之外,还有弧形擦痕、逆冲擦痕、新月形凿口、新月形裂纹、新月形裂口、颤痕等刻蚀遗迹的配套产出。经对比分析,蒙山发育的擦痕与四川海螺沟现代冰川谷内的擦痕具有完全的一致性,因此进一步确定了蒙山擦痕的冰川成因。  相似文献   

煤体静载破坏微震、电磁辐射及裂纹扩展特征研究     

艾迪昊  李成武  赵越超  李光耀 《岩土力学》2020,41(6):2043-2051

为研究型煤在单轴压缩破裂过程中产生的微震、电磁辐射信号与裂纹演化特征的对应关系，利用自主设计的低噪声静态加载试验系统，对0～0.25、0.25～0.5、0.5～1.0、1～2 mm共4种不同粒度的型煤进行了单轴压缩破坏试验，同步采集了煤样破坏过程中的微震、电磁辐射信号及破坏视频图像，提出了一种煤体裂纹快速提取方法并计算了型煤裂纹面积的变化规律。研究结果表明：型煤在单轴压缩过程中产生的微震、电磁辐射信号及裂纹面积在时域上具有良好的同步性。型煤破坏过程中裂纹面积随时间变化曲线可分为4个阶段。第1阶段为压实阶段，煤样所受应力值较小，其表面的裂纹面积以极为缓慢的速率增加。第2阶段为初始破裂阶段，随着应力的增加和内部弹性势能的积聚，型煤表面裂纹面积的增加速率较压实阶段有明显提高，伴随产生许多细小裂纹。第3阶段为加速破裂阶段，随着应力继续增加以及材料内部积聚弹性能的释放，试样变形过程加速，导致裂纹面积增速进一步增大。第4阶段为卸压阶段，试样的裂纹面积达到最大值，承载能力急剧降低，发生失稳破坏。  相似文献   

基于高清工业相机的盾构隧道裂缝智能识别算法分析     

李梓豪  唐超 《测绘通报》2021,(8):83-87,101

裂缝一直是隧道病害的重点检测对象,但传统人工巡检仅能通过肉眼发现后记录,人工识别精准度与效率完全取决于个人经验判断,无信息化手段辅助,作业效率识别精度亟待提升。针对以上问题,本文借助高清工业相机成像分辨率高、采集速度快等特点,将高清工业相机部署于轨道车上获取隧道表面裂缝病害信息,大幅提高了隧道裂缝识别效率,将识别精度提升至0.2 mm,同时融入优化的Cascade R-CNN算法,在有监督情况下训练隧道裂缝样本,最终实现了隧道裂缝病害的高效提取,同时研发了一套包含硬件数据采集、数据处理软件、数据管理平台的裂缝病害识别路线,真正意义上破除了识别慢、精度低、靠经验、难管理的技术壁垒。  相似文献   

弹性各向异性介质岩石体波相速度计算   总被引：1，自引：0，他引：1  

蔡晓刚 《地震地磁观测与研究》2011,32(6):80-89

综述弹性波相速度计算的若干严格数值方法和近似解析方法,对数值算例及对不同方法作了比较.结果显示,不同数值方法得到结果一致,其适用于计算任意复杂各向异性介质岩石的相速度,但不便从物理意义的角度去分析物理参数对速度的影响;而近似解析解虽然精确程度各有不同,但是便于从物理意义的角度去进行速度分析,并在此基础上解析求取群速度这...  相似文献   

利用目标点最小生成树的路面裂缝检测   总被引：1，自引：0，他引：1  

邹勤  李清泉  毛庆洲  陈龙 《武汉大学学报(信息科学版)》2011,(1):71-75

分析路面裂缝的成像特点,提出了一种基于目标点最小生成树的路面裂缝检测方法。最小生成树具有描述空间线性聚集特征的优点,有利于实现对裂缝的全局分析和提取。实验结果表明,对不连续裂缝的处理,本文方法优于传统方法。  相似文献   

DEM analyses of crack propagation in flawed rock mass under uniaxial compressionEI北大核心CSCD     

Jiang Ming-jing  Zhang Ning  Shen Zhi-fu  Chen He 《岩土力学》2015,(11):3293-+

A contact model for rock is established and imbedded into a DEM software by summarizing the bond granule tests. DEM simulation of uniaxial compression test on the pre-cracked Lac du Bonnet granite is performed, and then stress distributions are further analyzed and compared with the theoretical results. Different fracture criteria are employed to predict the crack initiation angles that are compared with theoretical ones. The results show that the failure modes obtained from DEM simulation are similar to experimental results, and stress distributions in DEM simulation are qualitatively similar to theoretical values. When the angle of pre-crack is small, the lateral stresses are compressive and tensile. The compressive strains concentrate at two edges, resulting in the tensile strains in the up-and downward cracks. When the angle of the pre-crack is large enough, the stress concentration is unobvious, leading to a discrepancy between the DEM and theoretical results. The crack extension angle resulting from uniaxial compression measured from DEM tests are in good agreement with those acquired from experimental tests. These angles are consistent with theoretical predictions by the maximum circumferential stress criterion and the maximum energy release rate criterion.  相似文献