排序方式： 共有15条查询结果，搜索用时 15 毫秒
1.
离线模型更新混合试验对构件拟静力数据进行恢复力模型参数识别,并更新数值子结构中相应构件的模型参数来提高混合试验精度,但该方法尚缺少真实试验的验证。本文基于课题组开展的足尺RC柱拟静力试验,取恢复力模型为集中塑性铰Ibarra-Medina-Krawinkler（IMK）模型,进行框架结构离线模型更新混合试验研究。结果表明,当物理子结构取为RC足尺柱时,离线模型更新混合试验能获得接近于真实试验情况下结构的地震响应,从而对该方法的有效性进行了试验验证。利用IMK经验公式,将真实试验模型参数识别值按轴压比进行对照修正,应用于不同层数的框架结构地震响应模拟,实现了试验数据的重复利用。 相似文献
2.
O.A. Montasir 《Ocean Engineering》2011,38(13):1417-1429
Spar platform has been regarded as a competitive floating structure for deep and ultra deep water oil and gas production. In this paper, an efficient methodology has been developed to determine the slow motion responses of slender floating offshore structures due to wave forces. Based on this methodology, a MATLAB program named ‘TRSPAR’ was developed to predict the dynamic responses in time domain and it was used in this study to obtain the numerical results of a typical truss spar platform connected to sea bed using nine taut mooring lines. The difference frequency forces were calculated using the principles of the extension of Morison equation for an inclined cylinder and the wave kinematics were predicted using hyperbolic extrapolation. Mooring lines were modelled as nonlinear springs and their stiffness was obtained by conducting the static offset simulation. Because of the lack of detailed calculations in literature, most of the equations used were derived and presented in this paper. The effects of the different sources of the second order difference frequency forces were compared for inertia and drag forces in terms of response spectra. To validate the TRSPAR code, its results were compared to results of a typical truss spar model test. 相似文献
3.
4.
The responses of a spar constrained by slack mooring lines to steep ocean waves and tensions in the mooring lines are simulated using two different numerical schemes: a quasi-static approach (SMACOS) and a coupled dynamic approach (COUPLE). The two approaches are the same in computing wave loads on the structure. Their difference is in modeling dynamic forces of mooring lines; that is the dynamic forces are included in the computation of COUPLE but neglected in SMACOS. The numerical simulation is examined against the laboratory measurements of the JIP Spar in a water depth of 318 m. The dynamic coupling effects between the JIP Spar and its mooring lines in different water depths (318, 618 and 1018 m) are investigated by the comparison of numerical simulations obtained using the quasi-static and coupled dynamic approaches. It is found that the damping of mooring lines reduces the slow-drift surge and pitch of the Spar, especially in deep water. The reduction in the amplitude of slow-drift surge can reach about 10% in a water depth of 1018 m. The tension in mooring lines may greatly increase in the wave frequency range when dynamic forces in mooring lines are considered. The mooring-line tension in the wave frequency range predicted by the coupled dynamic approach can be eight times as great as the corresponding prediction by the quasi-static approach in a water depth of 1018 m. This finding may have important implications for the estimation of the fatigue strength and life span of the mooring lines deployed in deep water oceans. 相似文献
5.
Accurate modeling of storage of carbon dioxide (CO2) in heterogeneous aquifers requires experiments of the capillary pressure as function of temperature and pressure. We present a method with which static drainage and imbibition capillary pressures can be measured continuously as a function of saturation at various temperature (T) and pressure (P) conditions. The measurements are carried out at (T, P) conditions of practical interest. Static conditions can be assumed as small injection rates are applied. The capillary pressure curves are obtained for the unconsolidated sand–distilled water–CO2 system. The experimental results show a decrease of drainage and imbibition capillary pressure for increasing CO2 pressures and pronounced dissolution rate effects for gaseous CO2. Significant capillary pressure fluctuations and negative values during imbibition are observed at near critical conditions. The measurement procedure is validated by a numerical model that simulates the experiments. 相似文献
6.
现存的传统村落木结构民居,由于受风雨侵蚀及战乱、地震、火灾的破坏,发生不同程度的损伤和破坏,榫卯节点残损情况直接影响整个民居房屋结构的安全。以北方地区传统村落“四梁八柱”木结构民居榫卯节点（馒头榫）为研究对象,考虑不同残损类型及程度,制作5个足尺梁柱节点模型,通过拟静力低周往复加载试验研究其破坏模式、弯矩-转角滞回响应及骨架曲线、加载刚度、变形、强度及耗能能力等力学性能。试验结果表明:馒头榫节点破坏模式表现为榫头拔出、榫与卯口挤压变形;相比于完好节点,残损馒头榫节点抗弯承载力、加载刚度和耗能能力明显降低,且“捏拢”效应加剧;榫头松动是导致节点力学性能降低的直接原因;垂直加载方向虫蛀节点力学性能劣化程度强于平行加载方向虫蛀节点,更易导致耗能能力降低。 相似文献
7.
Xie Wei Tang Xinming Engineer China Offshore Oil Development & Engineering Corporation Tianjin 《中国海洋工程》1993,(3)
The quasi-static analysis method introduced by API RP 2P is well known and accepted as a very useful mooring analysis method. In the early design stage, this method is widely used for preliminary analysis and mooring parameter selection. However, the quasi-static method of API RP 2P is developed for single-floating-body condition, i. e., only one floating body is considered in the computation procedure. Difficulties arise when it is used for the analysis of a CALM system, which is comprised of two floating bodies (tanker and buoy). This paper presents an analysis procedure for a two-floating-body system based on the quasi-static procedure of API RP 2P with some modifications reflecting special characteristics of the CALM system. Finally, the analysis results of a CALM system are given to illustrate the use of this procedure. 相似文献
8.
Naoki Uchida Satoshi Yui Satoshi Miura Toru Matsuzawa Akira Hasegawa Yoshinobu Motoya Minoru Kasahara 《Gondwana Research》2009,16(3-4):527-533
We analyzed small repeating earthquakes recorded over a 13-year period and GPS data recorded over an 8-month period to estimate interplate quasi-static slip associated with the 2003 Tokachi-oki earthquake (M8.0) and the 2004 off-Kushiro earthquake (M7.1). The repeating-earthquake analysis revealed that the slip rate near the source region of the Tokachi-oki earthquake was relatively low (< 5 cm/year) prior to the earthquake; however, in the last 3 years leading up to the event, a minor acceleration in slip occurred upon the deeper extension of the coseismic slip area of the earthquake. Repeating-earthquake and GPS data indicate that large amounts of afterslip occurred around the rupture area following the earthquake; the afterslip mainly propagated to the east of the coseismic slip area. We also infer that the occurrence of the 2004 off-Kushiro earthquake, located about 100 km northeast of the epicenter of the Tokachi-oki earthquake, was advanced by the afterslip associated with the Tokachi-oki earthquake. 相似文献
9.
The tensile resistance of a suction bucket is investigated using three different numerical formulations. The first formulation utilizes the three-field u-p-U formulation accounting for solid and fluid displacements, u and U, as well as the pore-fluid pressure, p. The two other formulations comprise the simpler u-p formulation in its dynamic and quasi-static form, accounting only for solid displacement and pore-fluid pressure. As basis for comparison, the tensile resistance of a single suction bucket is investigated using a velocity-driven model for a wide range of velocities. It is found, that the quasi-static u-p formulation is sufficient for most relevant velocities. 相似文献
10.
Xiaohong Chen Yu Ding Jun Zhang Pierre Liagre John Niedzwecki Per Teigen 《Ocean Engineering》2006,33(1):93-117
The dynamically coupled interaction between the hull of a floating platform and its risers and tendons plays an important role in the global motions of the platform and the tension loads in the tendons and risers. This is an especially critical design issue in the frequency ranges outside the wave frequencies of significant energy content. This study examines the importance of this coupled dynamic interaction and the effectiveness of different approaches for their prediction. A numerical code, named COUPLE, has been developed for computing the motions and tensions pertaining to a moored floating structure positioned and restrained by its mooring/tendon and riser systems. In this study the experimentally measured motions of a mini-TLP are compared with those computed using COUPLE and alternative predictions based upon quasi-static analysis. The comparisons confirm that COUPLE is able to predict the dynamic interaction between the hull and its tendon and riser systems while the related quasi-static analysis fails. The comparisons also show that wave loads on the mini-TLP can be accurately predicted using the Morison equation provided that the wavelength of incident waves is much longer than the diameters of the columns and pontoons and that the wave kinematics used are sufficiently accurate. Although these findings are based upon the case of a mini-TLP, they are expected to be relevant to a wide range of floating or compliant deepwater structures. 相似文献