Numerical Simulation of Magnetic Reconnection Driven by the Laser Helmholtz Capacitor-coil Targets     

XU Shan-shan  MEI Zhi-xing  ZHONG Jia-yong  LIN Jun 《Chinese Astronomy and Astrophysics》2021,45(2):131-146

  相似文献   

射电望远镜远场区域强干扰源规避方法研究          下载免费PDF全文

李欢  刘奇  王娜  蔡明辉  王玥  朱春花  苏晓明 《天文学报》2021,62(6):61

随着频率使用率的提高, 射电天文台址地面或空间存在强电磁干扰致使望远镜接收机系统处于非线性状态. 为减少强电磁干扰的影响、提高天文观测效率, 提出了一种基于望远镜远场区域的强干扰源规避方法. 首先, 通过仿真分析确定的射电望远镜远场方向图, 结合望远镜与干扰源之间的位置关系, 分析了强电磁干扰到达射电望远镜焦点处的功率响应, 并依据接收机第2阶中频放大器性能参数, 确定射电望远镜处于非饱和状态的规避角度计算方法. 其次, 采用该方法计算分析了民航飞机对射电望远镜的影响, 若民航飞机上有主动发射的干扰源, 且不经过反射等传播现象, 当射电望远镜主波束轴偏开一定方向后, 可有效降低对射电望远镜的干扰强度.  相似文献   

Runoff response of a small agricultural basin in the argentine Pampas considering connectivity aspects     

María Guadalupe Ares  Marcelo Varni  Celio Chagas 《水文研究》2020,34(14):3102-3119

  相似文献   

柱顶层间隔震体系增量动力响应研究          下载免费PDF全文

袁梦醒  陈望  刘彦辉  谭平  金建敏 《地震工程学报》2020,42(4):872-880

针对悬臂柱顶有拉梁和无拉梁层间隔震体系的抗震性能问题,运用增量动力分析(IDA)方法进行弹塑性分析,模拟结构从弹性到弹塑性直至最后倒塌的全过程。通过调幅地震动得到相应的层间位移角及峰值加速度,分别绘制单条与多条IDA曲线分析拉梁对隔震结构动力响应的影响,研究两种结构的抗震性能。结果表明:在相同性能点,有拉梁和无拉梁对纤维铰弯矩值和曲率值基本无影响,而在不同性能点,纤维铰状态明显不同;两种体系从正常使用阶段到防止倒塌阶段所需的加速度峰值的差距慢慢增大;在极罕遇地震下,柱顶有拉梁层间隔震体系的下部结构抗震性能要高于柱顶无拉梁层间隔震体系。  相似文献   

基岩倾角对盆地地震响应的影响分析          下载免费PDF全文

卓发成 《地震工程学报》2020,42(4):1035-1042

为了研究盆地基岩倾角对盆地地表动力反应的影响,选取了一个跨度2 km,深度500 m的二维成层盆地为研究对象进行有限元动力反应分析。以持时0.25 s的狄拉克脉冲作为输入地震动,探讨了P波和SV波垂直入射时,盆地基岩倾角从10°\,20°\,30°\,40°依次增加的情况下盆地地震反应。结果表明:入射波在倾斜基岩处发生波型转化,同时产生面波,在盆地中心区域发生汇聚;随着基岩倾角的增加地表中心处的卓越频率有减小的趋势。  相似文献   

The potential of Pléiades images with high angle of incidence for reconstructing the coastal cliff face in Normandy (France)     

《International Journal of Applied Earth Observation and Geoinformation》2020

To monitor chalk cliff face along the Normandy coast (NW France) which is prone to erosion, we tested the potential of cliff face 3D reconstruction using pairs of images with high angle of incidence at different dates from the agile Pléiades satellites. The verticality aspect of the cliff face brings difficulties in the 3D reconstruction process. Furthermore, the studied area is challenging mainly because the cliff face is north-oriented (shadow). Pléiades images were acquired over several days (multi-date stereoscopic method) with requested incidence angles until 40°. 3D reconstructions of the cliff face were compared using two software: ASP® and ERDAS IMAGINE®. Our results are twofold. Firstly, despite ASP® provides denser point clouds than ERDAS IMAGINE® (an average of 1.60 points/m² from 40° incidence angle stereoscopic pairs on the whole cliff face of Varengeville-sur-Mer against 0.77 points/m² respectively), ERDAS IMAGINE® provides more reliable point clouds than ASP® (precision assessment on the Varengeville-sur-Mer cliff face of 0.31 m ± 2.53 and 0.39 m ± 4.24 respectively), with a better spatial distribution over the cliff face and a better representation of the cliff face shape. Secondly, the quality of 3D reconstructions depends mostly on the amount of noise from raw images and on the shadow intensity on the cliff face (radiometric quality of images).  相似文献   

Update and spatial extension of strategic forest inventories using time series remote sensing and modeling     

《International Journal of Applied Earth Observation and Geoinformation》2020

Up-to-date forest inventory information relating the characteristics of managed and natural forests is fundamental to sustainable forest management and required to inform conservation of biodiversity and assess climate change impacts and mitigation opportunities. Strategic forest inventories are difficult to compile over large areas and are often quickly outdated or spatially incomplete as a function of their long production cycle. As a consequence, automated approaches supported by remotely sensed data are increasingly sought to provide exhaustive spatial coverage for a set of core attributes in a timely fashion. The objective of this study was to demonstrate the integration of current remotely-sensed data products and pre-existing jurisdictional inventory data to map four forest attributes of interest (stand age, dominant species, site index, and stem density) for a 55 Mha study region in British Columbia, Canada. First, via image segmentation, spectrally homogenous objects were derived from Landsat surface-reflectance pixel composites. Second, a suite of Landsat-based predictors (e.g., spectral indices, disturbance history, and forest structure) and ancillary variables (e.g., geographic, topographic, and climatic) were derived for these units and used to develop predictive models of target attributes. For the often difficult classification of dominant species, two modelling approaches were compared: (a) a global Random Forests model calibrated with training samples collected over the entire study area, and (b) an ensemble of local models, each calibrated with spatially constrained local samples. Accuracy assessment based upon independent validation samples revealed that the ensemble of local models was more accurate and efficient for species classification, achieving an overall accuracy of 72% for the species which dominate 80% of the forested areas in the province. Results indicated that site index had the highest agreement between predicted and reference (R² = 0.74, %RMSE = 23.1%), followed by stand age (R² = 0.62, %RMSE = 35.6%), and stem density (R² = 0.33, %RMSE = 65.2%). Inventory attributes mapped at the image-derived unit level captured much finer details than traditional polygon-based inventory, yet can be readily reassembled into these larger units for strategic forest planning purposes. Based upon this work, we conclude that in a multi-source forest monitoring program, spatially localized and detailed characterizations enabled by time series of Landsat observations in conjunction with ancillary data can be used to support strategic inventory activities over large areas.  相似文献   

基于像元二分模型的地表植被覆盖度估算模块化设计与实现     

赵威成  张红华  马福义  叶欣 《北京测绘》2020,(3):285-288

地表植被覆盖度是的一种应用广泛的定量遥感产品,在水文、生态、区域变化等方面都具有重要的意义。像元二分模型是应用最多的一种遥感估算地表覆盖度的方法。目前,用遥感的方法进行地表植被覆盖度估算没有完整、系统的工具,用户只能逐步进行操作,效率低下,鉴于上述情况,本文运用IDL交互式数据语言,基于ENVI二次开发了一个植被覆盖度估算程序,取得了一定的成效,对遥感定量产品的生产、应用具有一定意义。  相似文献   

Sentinel-2卫星落叶松林龄信息反演   总被引：1，自引：0，他引：1  

唐少飞  田庆久  徐凯健  徐念旭  岳继博 《遥感学报》2020,24(12):1511-1524

林龄结构信息能够有效反映区域森林群落不同生长阶段的固碳能力，对于评估森林生态系统的健康状况具有重要意义。本研究以中国温带典型优势树种落叶松林为研究对象，分别选择其芽萌动期、展叶期和落叶期时段的Sentinel-2影像，采用多元线性回归（MLR）、随机森林（RF）、支持向量机回归（SVR）、前馈反向传播神经网络（BP）以及多元自适应回归样条（MARS）等5种方法依次构建落叶松林龄反演模型。通过相关性分析首先确定最佳遥感反演物候期，并在此基础上根据相关性差异筛选出5个最优特征变量用于模型反演，分别为冠层含水量（CWC），归一化水体指数（NDWI），叶面积指数（LAI），光合有效辐射吸收率（FAPAR）和植被覆盖度（FVC）。研究结果表明，展叶期为落叶松林最佳遥感反演物候期。除植被衰减指数（PSRI）以及落叶期的NDVI、RVI外，落叶松林龄与各指标之间均呈负相关关系，其中与冠层含水量（CWC）的相关性最高，pearson相关系数达到-0.74（p<0.01）。此外，不同模型反演结果表明，随机森林模型（RF）为最佳落叶松林龄估测模型，其平均决定系数R²和平均均方根误差RMSE分别为0.89和2.91 a；多元线性回归模型（MLR）的林龄估测结果最差，其平均决定系数R²和平均均方根误差RMSE仅为0.57和5.69 a，非线性模型能更好的解释林龄与建模变量之间的关系。  相似文献   

农机投入对农业GTFP影响及门槛效应的区域差异分析     

刘敏  姜会明  姜天龙 《地理科学》2020,40(12):2037-2045

按照粮食的产销情况，将全国划分为3类粮食功能区域，利用固定效应模型和门槛效应模型分析了农机投入对农业绿色全要素生产率（GTFP）的影响及门槛效应的区域差异。结果表明：农机投入对农业GTFP的影响程度存在区域异质性，农机投入对粮食主销区农业GTFP提升的促进作用最大，粮食产销平衡区次之，粮食主产区最小；农机投入对农业GTFP的影响路径亦存在区域差异，粮食主产区和产销平衡区的农机投入通过促进农业技术效率和农业技术进步进而推动农业GTFP提升，粮食主销区的农机投入通过促进农业技术进步推动农业GTFP提升；农机投入对粮食主产区农业GTFP的影响存在双门槛效应，对粮食主销区和产销平衡区农业GTFP的影响存在单门槛效应。  相似文献