Experimental investigation of seismic behaviour of the ancient Protiron monument model     

Željana Nikolić  Lidija Krstevska  Pavao Marović  Hrvoje Smoljanović 《地震工程与结构动力学》2019,48(6):573-593

Throughout history, dry-stone masonry structures have been strengthened with different types of metal connectors in order to increase their resistance which enabled their survival, especially in the seismically active area. One such example is the ancient Protiron monument placed in the Peristyle square of the Diocletian's Palace in Split, Croatia. The Protiron was built at the turn of the 3rd century as a stone masonry structure with dowels embedded between its base, columns, capitals and broad gable. The stone blocks in the broad gable were connected by metal clamps during restoration at the beginning of the 20th century. In order to study the seismic performance of the strengthened stone masonry structures, an experimental investigation of seismic behaviour of a physical model of the Protiron was performed on the shaking table. The model was designed as a true replica model in a length scale of 1:4 and exposed to representative earthquake with increasing intensities up to collapse. The tests provided a clear insight into system behaviour, damage mechanism and failure under intensive seismic load, especially into the efficiency of connecting elements, which had a special role in increasing seismic resistance and protection of the structure from collapse. Additionally, this experiment provided valuable data for verification and calibration of numerical models for strengthened stone masonry structures.  相似文献   

Real‐time force control for servo‐hydraulic actuator systems using adaptive time series compensator and compliance springs     

《地震工程与结构动力学》2018,47(4):854-871

Servo‐hydraulic actuators have been widely used for experimental studies in engineering. They can be controlled in either displacement or force control mode depending on the purpose of a test. It is necessary to control the actuators in real time when the rate‐dependency effect of a test specimen needs to be accounted for under dynamic loads. Real‐time hybrid simulation (RTHS) and effective force testing (EFT) method, which can consider the rate‐dependency effect, have been known as viable alternatives to the shake table testing method. Due to the lack of knowledge in real‐time force control, however, the structures that can be tested with RTHS and EFT are fairly limited. For instance, satisfying the force boundary condition for axially stiff members is a challenging task in RTHS, while EFT has a difficulty to be implemented for nonlinear structures. In order to resolve these issues, this paper introduces new real‐time force control methods utilizing the adaptive time series (ATS) compensator and compliance springs. Unlike existing methods, the proposed force control methods do not require the structural modeling of a test structure, making it easy to be implemented especially for nonlinear structures. The force tracking performance of the proposed methods is evaluated for a small‐scale steel mass block system with a magneto‐rheological damper subjected to various target forces. Accuracy, time delay, and resonance response of these methods are discussed along with their force control performance for an axially stiff member. Overall, a satisfactory force tracking performance was observed by using the proposed force control methods.  相似文献   

Loading protocols for experimental seismic qualification of members in conventional and emerging steel frames     

Cheng Fang  Yiwei Ping  Yiyi Chen 《地震工程与结构动力学》2020,49(2):155-174

Quasi-static testing is one of the most commonly used experimental methods for examining the seismic performance of structural members. However, consistent loading protocols for experimental seismic qualification of members in emerging steel frames such as self-centering braced frames (SCBFs) as well as in some conventional ones including buckling-restrained braced frames (BRBFs) are still lacking. This paper aims to propose standardized loading protocols based on time-history dynamic analysis on a series of prototype building frames, including steel SCBFs, BRBFs, and moment-resisting frames (MRFs), where both far-field and near-fault earthquakes are considered. The methodology for the development of the loading protocols involves ground motion selection and scaling, design and analysis of prototype buildings, analysis results processing, and rainflow cycle counting, together with extra justification steps. The proposed loading protocols are consistently derived based on the MCE-level seismic hazard and 84^th percentile values of key seismic demand parameters. These parameters are number of damaging cycles N_t, maximum inter-story drift θ_max, inter-story drift range Δθ_i, sum of inter-story drift range ΣΔθ_i, and residual inter-story drift θ_r. The analysis confirms the variations in these seismic demands imposed on the different structural systems under different types of ground motions, highlighting the necessity of developing separate loading protocols for the different cases. The assumptions, decisions, and judgments made during the development of the loading protocols are elaborated, and the conditions and restrictions are outlined. The rationality of the proposed loading protocols is further justified through demonstrating the cumulative distribution function and energy dissipation demand of the systems.  相似文献   

Wave tank and bench-top control testing of a wave energy converter     

《Applied Ocean Research》2019

An increasing number of experiments are being conducted to study the design and performance of wave energy converters. Often in these tests, a real-time realization of prospective control algorithms is applied in order to assess and optimize energy absorption as well as other factors. This paper details the design and execution of an experiment for evaluating the capability of a model-scale WEC to execute basic control algorithms. Model-scale hardware, system, and experimental design are considered, with a focus on providing an experimental setup capable of meeting the dynamic requirements of a control system. To more efficiently execute such tests, a dry bench testing method is proposed and utilized to allow for controller tuning and to give an initial assessment of controller performance; this is followed by wave tank testing. The trends from the dry bench test and wave tank test results show good agreement with theory and confirm the ability of a relatively simple feedback controller to substantially improve energy absorption. Additionally, the dry bench testing approach is shown to be an effective and efficient means of designing and testing both controllers and actuator systems for wave energy converters.  相似文献   

An approach for shake table performance evaluation during repair and retrofit actions     

Christopher Trautner  Yewei Zheng  John S. McCartney  Tara Hutchinson 《地震工程与结构动力学》2018,47(1):131-146

Large‐scale, servo‐hydraulic shake tables are a central fixture of many earthquake engineering and structural dynamics laboratories. Wear and component failure from frequent use may lead to control problems resulting in reduced motion fidelity, necessitating repairs and replacement of major components. This paper presents a methodology to evaluate shake table performance pre‐ and post‐repair, including the definition of important performance metrics. The strategy suggested is presented in the context of the rebuilding of a 4.9 × 3.1 m, 350‐kN‐capacity uniaxial shake table. In this case, the rebuild consisted of characterization of wear to table components, replacement of worn bearing surfaces, and replacement of hydraulic accumulators. To assess the effectiveness of the repair actions, sinusoidal and triangular waves, white noise, and earthquake histories were run on the table before and after the rebuild. The repair actions were successful in reducing the position and velocity dependence of friction, improving the ability of control algorithms to accurately reproduce earthquake motions. The maximum and average response spectral misfits in the period range of 0.1–2 seconds were reduced from approximately 50% to 15%, and from 5% to less than 2.5%, respectively.  相似文献   

Effects of variation in loading protocol on the strength and deformation capacity of ductile reinforced concrete beams     

Kai J. Marder  Christopher J. Motter  Kenneth J. Elwood  G. Charles Clifton 《地震工程与结构动力学》2018,47(11):2195-2213

Understanding the impact of prior earthquake damage on residual capacity is important for postearthquake damage assessment of buildings; however, interpretation of such impact is challenging when based on tests using traditional reversed‐cyclic loading protocols. A new loading protocol, consisting of a dynamic earthquake displacement history followed by quasi‐static reversed‐cyclic loading to failure, is presented as an alternative to traditional simulated seismic loading protocols. Data are analyzed from a set of 12 nominally identical ductile reinforced concrete beams that were tested by using variations of this protocol and traditional reversed‐cyclic and monotonic protocols. Differences in the cycle content of the earthquake displacement histories applied to the test specimens allowed for the effects of load history variation below 2.2% drift to be isolated. It is found that such variation had no effect on the beam deformation capacities. The effects of dynamic loading rates are also analyzed and compared against control quasi‐static specimens. Relative strength increases due to dynamic loading are found to be more significant at yield than at ultimate. Dynamic loading rates led to modest reductions in the beam deformation capacities, but the presence of causality between these variables remains uncertain.  相似文献   

中国和欧盟阻尼器检测标准比较          下载免费PDF全文

鲁亮  赵菲  曹文清  苏磊  葛雪 《世界地震工程》2018,34(4):165-173

国内阻尼器工程应用越来越多，阻尼器生产和应用时需要进行型式检验和出厂检验。中国和欧盟均制定了阻尼器产品检验标准，但在检测参数、检测方法和数据处理等方面存在一些差异，有些参数的检测还存在一些困难和争议，通过比较研究，指出中欧阻尼器检测标准的异同点，并分析各自的特点。以应用量较大的位移型软钢阻尼器和速度型黏滞流体阻尼器为例，比较中国和欧盟检测标准的异同点，内容包括检测方法、检测设备和数据处理方法等，提出一些对现有检测标准的改进建议，供同行参考。  相似文献   

煤层气井产出剖面测试技术及应用     

张雷  樊洪波  侯伟  张伟  郝帅  孙晓光 《吉林大学学报(地球科学版)》2020,50(2):617-626

现有常规油气井产出剖面测试方法在煤层气井中适应性较差，测试范围和测量工艺等存在局限性，施工成功率低。因此，本文对煤层气井产出剖面测试技术进行了整体的系统化设计和研发。通过紧凑的结构设计、高度集成，研发了一套可同时进行温度、压力、磁性定位、热式流量、探针持气率、微波持气、涡轮流量和超声流量等多参数测量的煤层气井测井仪，并研制了一套一次下井可进行多种测试技术测量的煤层气井产出剖面测试技术。同时提高了测试仪器的精度和抗干扰能力，开发了多任务多窗口的便携地面系统操作，并研制新型偏心测试井口应用于煤层气井，实现修井作业时不间断连续测试。该技术在鄂尔多斯盆地石楼北区块3口煤层气井进行了现场试验，取得精确、连续的测试数据。测试结果显示，石楼北区块8^#+9^#煤层为主力产气、产水层。  相似文献   

Nonlinear dynamic tests of a reinforced concrete frame building at different damage levels     

Seyedsina Yousefianmoghadam  Mingming Song  Mohammad Ebrahim Mohammadi  Brittany Packard  Andreas Stavridis  Babak Moaveni  Richard L. Wood 《地震工程与结构动力学》2020,49(9):924-945

This paper discusses the dynamic tests of a two-story infilled reinforced concrete (RC) frame building using an eccentric-mass shaker. The building, located in El Centro, CA, was substantially damaged prior to the tests due to the seismic activity in the area. During the testing sequence, five infill walls were removed to introduce additional damage states and to investigate the changes in the dynamic properties and the nonlinear response of the building to the induced excitations. The accelerations and displacements of the structure under the forced and ambient vibrations were recorded through an array of sensors, while lidar scans were obtained to document the damage. The test data provide insight into the nonlinear response of an actual building and the change of its resonant frequencies and operational shapes due to varying damage levels and changes of the excitation amplitude, frequency, and orientation.  相似文献   

星基增强系统L1频段信息服务性能分析     

赵镇  陈刚  胡志刚 《中国地震》2020,36(4):912-923

在北斗全球导航服务进程中，北斗星基增强服务的建设是我国卫星导航事业自身建设和不断完善发展的内在需求，更是我国卫星导航系统标准化建设的必然要求。本文基于星基增强信息定位原理，研究并实现星基增强系统的标准定位算法，采用IGS站点数据及增强信息电文，对WAAS与EGNOS系统服务性能进行分析评估，在“陆态网络”数据处理中，加入SBAS信息也可对相关误差进行改正。结果表明，加入播发的差分改正信息定位精度相对于伪距单点定位显著提高，平面方向统计均方根残差优于1m，高程方向优于1.2m；研究发现受地面参考站分布区域以及电离层、观测星座的影响，WAAS和EGNOS在定位服务性能覆盖范围内均表现出一定的区域性。从总体分析来看，不同系统空间段GEO卫星播发SBAS消息特性不一，均满足单频定位需求，EGNOS稳定性低于WAAS系统，播发消息时有中断现象，在实时单频定位性能方面，WAAS的服务性能较EGNOS得到更优的解算结果。  相似文献