利用CEEMD分析中国沿海GNSS站高程时序变化     

刘豪  周东旭  王盼龙  张化疑  王永康  姜传苓 《测绘通报》2020,(3):39-43,77

利用完备经验模态分解方法（CEEMD）对我国沿海地区6个GNSS基准站（2010—2018）的高程时序数据进行了处理分析。结果表明：CEEMD在高程时间序列分析中具有一定的优越性，可准确分解出各GNSS站高程时序中存在的周、月、季节、年等变化周期项，其中周年运动是主要贡献项，各站高程时间序列的短周期变化与潮汐变化周期具有密切关联性；沿海GNSS站的地面沉降既具有区域的一致性，又存在区域间差异性，其中D区DBJO、DZJJ站呈现先下降后上升的趋势，N区NZUH、NWZU站呈下降趋势，B区的BZMW呈上升趋势，而同海区的BLHT站则呈显著的下降趋势。  相似文献   

Clinoform architecture and along‐strike facies variability through an exhumed erosional to accretionary basin margin transition     

Miquel Poyatos‐Mor  George D. Jones  Rufus L. Brunt  Daniel E. Tek  David M. Hodgson  Stephen S. Flint 《Basin Research》2019,31(5):920-947

Exhumed basin margin‐scale clinothems provide important archives for understanding process interactions and reconstructing the physiography of sedimentary basins. However, studies of coeval shelf through slope to basin‐floor deposits are rarely documented, mainly due to outcrop or subsurface dataset limitations. Unit G from the Laingsburg depocentre (Karoo Basin, South Africa) is a rare example of a complete basin margin scale clinothem (>60 km long, 200 m‐high), with >10 km of depositional strike control, which allows a quasi‐3D study of a preserved shelf‐slope‐basin floor transition over a ca. 1,200 km² area. Sand‐prone, wave‐influenced topset deposits close to the shelf‐edge rollover zone can be physically mapped down dip for ca. 10 km as they thicken and transition into heterolithic foreset/slope deposits. These deposits progressively fine and thin over tens of km farther down dip into sand‐starved bottomset/basin‐floor deposits. Only a few km along strike, the coeval foreset/slope deposits are bypass‐dominated with incisional features interpreted as minor slope conduits/gullies. The margin here is steeper, more channelized and records a stepped profile with evidence of sand‐filled intraslope topography, a preserved base‐of‐slope transition zone and sand‐rich bottomset/basin‐floor deposits. Unit G is interpreted as part of a composite depositional sequence that records a change in basin margin style from an underlying incised slope with large sand‐rich basin‐floor fans to an overlying accretion‐dominated shelf with limited sand supply to the slope and basin floor. The change in margin style is accompanied with decreased clinoform height/slope and increased shelf width. This is interpreted to reflect a transition in subsidence style from regional sag, driven by dynamic topography/inherited basement configuration, to early foreland basin flexural loading. Results of this study caution against reconstructing basin margin successions from partial datasets without accounting for temporal and spatial physiographic changes, with potential implications on predictive basin evolution models.  相似文献   

Stochastic bivariate time series models of waves in the North Sea and their application in simulation-based design     

《Applied Ocean Research》2019

In this paper, we present and evaluate three long-term wave models for application in simulation-based design of ships and marine structures. Designers and researchers often rely on historical weather data as a source for ocean area characteristics based on hindcast datasets or in-situ measurements. The limited access and size of historical datasets reduces repeatability of simulations and analyses, making it difficult to assess the sampling variability of performance and loads on marine vessels and structures. Markov, VAR and VARMA wave models, producing independent long-term time series of significant wave height (H_s) and spectral peak period (T_p), is presented as possible solutions to this problem. The models are tested and compared by addressing how the models affect interpretation of design concepts and the ability to replicate statistical and physical characteristics of the wave process. Our results show that the VAR and VARMA models perform sufficiently in describing design performance, but does not capture the physical process fully. The Markov model is found to perform worst of the tested models in the applied tests, especially for measures covering several consecutive sea states.  相似文献   

海上风电升压站平台高程确定标准的合理性研究     

潘晓春 《海洋技术学报》2019,38(6):83-88

为保证海上风电升压电站建设的经济合理与安全可靠,合理确定海上风电升压电站平台高程十分必要。文中从波浪与潮位的遭遇组合、最大波高取值与现行相关标准的比较、最大波峰高度计算的合理性等方面,全面分析了确定海上风电升压站平台高程各组成项取值标准的合理性,研究认为现行标准明显偏高。建议海上升压站平台底部高程按"100年一遇极端高水位+重现期50年波列累积频率1%的最大波峰高度+安全超高"确定。结合工程实例计算分析,按本文建议可使海上升压站平台高程明显降低,从而节省工程造价,还可减轻升压站工程对周边风机的遮蔽影响,以达到多发电量的效果。  相似文献   

二次曲面与最小二乘配置的组合模型在GPS高程异常拟合中的应用     

吕建伟  张志华  张新秀  刘祖昱 《测绘通报》2020,(5):127

在工程实践应用中，为了有效利用GPS高程数据，减少对传统水准测量的依赖，提高GPS高程异常的拟合精度便显得十分重要。为此，本文在介绍二次曲面拟合和最小二乘配置拟合基本原理分析、算法过程推导的基础上，提出了一种新的高程异常拟合方法。首先在二次曲面拟合的基础上，计算得到原始观测数据与拟合数据之间的残差序列，然后采用最小二乘配置模型对包括二次曲面拟合模型误差的综合误差进行优化减弱，最后得到新的高程异常。通过实例，将二次曲面拟合法，最小二乘配置法与文中提出的新方法进行比较分析。结果表明：新的组合方法的拟合预测精度要明显优于最小二乘配置及二次曲面拟合。  相似文献   

Inter-comparison of remote sensing platforms for height estimation of mango and avocado tree crowns     

《International Journal of Applied Earth Observation and Geoinformation》2020

To support the adoption of precision agricultural practices in horticultural tree crops, prior research has investigated the relationship between crop vigour (height, canopy density, health) as measured by remote sensing technologies, to fruit quality, yield and pruning requirements. However, few studies have compared the accuracy of different remote sensing technologies for the estimation of tree height. In this study, we evaluated the accuracy, flexibility, aerial coverage and limitations of five techniques to measure the height of two types of horticultural tree crops, mango and avocado trees. Canopy height estimates from Terrestrial Laser Scanning (TLS) were used as a reference dataset against height estimates from Airborne Laser Scanning (ALS) data, WorldView-3 (WV-3) stereo imagery, Unmanned Aerial Vehicle (UAV) based RGB and multi-spectral imagery, and field measurements. Overall, imagery obtained from the UAV platform were found to provide tree height measurement comparable to that from the TLS (R² = 0.89, RMSE = 0.19 m and rRMSE = 5.37 % for mango trees; R² = 0.81, RMSE = 0.42 m and rRMSE = 4.75 % for avocado trees), although coverage area is limited to 1–10 km² due to battery life and line-of-sight flight regulations. The ALS data also achieved reasonable accuracy for both mango and avocado trees (R² = 0.67, RMSE = 0.24 m and rRMSE = 7.39 % for mango trees; R² = 0.63, RMSE = 0.43 m and rRMSE = 5.04 % for avocado trees), providing both optimal point density and flight altitude, and therefore offers an effective platform for large areas (10 km²–100 km²). However, cost and availability of ALS data is a consideration. WV-3 stereo imagery produced the lowest accuracies for both tree crops (R² = 0.50, RMSE = 0.84 m and rRMSE = 32.64 % for mango trees; R² = 0.45, RMSE = 0.74 m and rRMSE = 8.51 % for avocado trees) when compared to other remote sensing platforms, but may still present a viable option due to cost and commercial availability when large area coverage is required. This research provides industries and growers with valuable information on how to select the most appropriate approach and the optimal parameters for each remote sensing platform to assess canopy height for mango and avocado trees.  相似文献   

Moving from plot-based to hillslope-scale assessments of savanna vegetation structure with long-range terrestrial laser scanning (LR-TLS)     

《International Journal of Applied Earth Observation and Geoinformation》2020

Reliable quantification of savanna vegetation structure is critical for accurate carbon accounting and biodiversity assessment under changing climate and land-use conditions. Inventories of fine-scale vegetation structural attributes are typically conducted from field-based plots or transects, while large-area monitoring relies on a combination of airborne and satellite remote sensing. Both of these approaches have their strengths and limitations, but terrestrial laser scanning (TLS) has emerged as the benchmark for vegetation structural parameterization – recording and quantifying 3D structural detail that is not possible from manual field-based or airborne/spaceborne methods. However, traditional TLS approaches suffer from similar spatial constraints as field-based inventories. Given their small areal coverage, standard TLS plots may fail to capture the heterogeneity of landscapes in which they are embedded. Here we test the potential of long-range (>2000 m) terrestrial laser scanning (LR-TLS) to provide rapid and robust assessment of savanna vegetation 3D structure at hillslope scales. We used LR-TLS to sample entire savanna hillslopes from topographic vantage points and collected coincident plot-scale (1 ha) TLS scans at increasing distances from the LR-TLS station. We merged multiple TLS scans at the plot scale to provide the reference structure, and evaluated how 3D metrics derived from LR-TLS deviated from this baseline with increasing distance. Our results show that despite diluted point density and increased beam divergence with distance, LR-TLS can reliably characterize tree height (RMSE = 0.25–1.45 m) and canopy cover (RMSE = 5.67–15.91%) at distances of up to 500 m in open savanna woodlands. When aggregated to the same sampling grain as leading spaceborne vegetation products (10–30 m), our findings show potential for LR-TLS to play a key role in constraining satellite-based structural estimates in savannas over larger areas than traditional TLS sampling can provide.  相似文献   

基于数学形态学的位场数据边缘增强方法     

张建民  胡英飒  曾昭发  杜威  张领  槐楠  胡志鹏 《吉林大学学报(地球科学版)》2019,49(3):845-856

位场数据边缘增强对于地质构造研究和矿床勘查具有重要意义。现有的边缘增强方法多数基于位场数据的导数构建，往往存在对噪声敏感的缺点，且处理结果中常有虚假边界的出现。本文基于数学形态学良好的形状分析和噪声压制性能，通过数学形态学基本算子的组合叠加，提出了一种新的位场数据边缘增强方法。该方法容易实现，且不需要计算位场数据的水平和垂向导数。板状体模型试验结果表明，该方法能有效地对重力异常和化极后的磁异常数据进行边缘增强。针对三维模型试验中正负异常同时存在的情况，相比以往几种方法，该方法输出的边缘更清晰且没有额外边缘的产生，并表现出更强的抗噪能力。最后将该方法和以往几种方法应用到老挝万象地区实际重力异常数据的处理中，结果显示该方法刻画出的边缘更加连续清晰；同时结合以往地质资料，推断了成矿的有利部位。  相似文献   

山区阶梯式河道水流阻力研究   总被引：1，自引：0，他引：1       下载免费PDF全文

罗铭  张焕  丁锐  黄尔  杨奉广 《水科学进展》2019,30(5):719-726

山区阶梯式河道是自然界来水来沙和山区大比降河床相互作用所形成的，其水力特性、河道阻力较为复杂。为了深入研究其阻力机理，从河床结构阻水的角度提出阶梯式结构糙率尺度的概念，得到了适用于阶梯式河道跌落水流的形体阻力系数表达式，并由不同来源的阻力分量构成了新的山区阶梯式河道水流总阻力系数公式。新公式结果表明，通过不同类型河段的野外试验数据，表面泥沙、阶梯形状以及漂石产生的阻力系数分量之和与试验测量总阻力系数数据的误差较小。随着雷诺数和阶梯单元尺寸的增加，河床表面的泥沙肤面阻力系数基本不变，阶梯式结构形成的跌落水流过渡到滑行水流，阶梯形体阻力系数逐渐变小，而较大粒径松散漂石产生的水流阻力系数只随着雷诺数的增大而减小。  相似文献   

基于ROMS和4DVAR的沿轨与网格化SSH数据同化效果评价   总被引：1，自引：1，他引：0  

周超杰  丁效华  张杰  杨俊刚  马强 《海洋学报(英文版)》2018,37(9):50-58

Remote sensing products are significant in the data assimilation of an ocean model. Considering the resolution and space coverage of different remote sensing data, two types of sea surface height(SSH) product are employed in the assimilation, including the gridded products from AVISO and the original along-track observations used in the generation. To explore their impact on the assimilation results, an experiment focus on the South China Sea(SCS) is conducted based on the Regional Ocean Modeling System(ROMS) and the four-dimensional variational data assimilation(4 DVAR) technology. The comparison with EN4 data set and Argo profile indicates that, the along-track SSH assimilation result presents to be more accurate than the gridded SSH assimilation, because some noises may have been introduced in the merging process. Moreover, the mesoscale eddy detection capability of the assimilation results is analyzed by a vector geometry–based algorithm. It is verified that, the assimilation of the gridded SSH shows superiority in describing the eddy's characteristics, since the complete structure of the ocean surface has been reconstructed by the original data merging.  相似文献