高层高强钢组合偏心支撑框架抗震性能简化分析          下载免费PDF全文

洪敏  秦瑞  王凤  高永国  高中南  李少华 《地震工程学报》2020,42(2):332-336

高强钢组合偏心支撑钢框架是一种新型的抗震结构体系,为分析其抗震性能,利用ABAQUS有限元软件建立了简化分析模型。在验证该简化模型合理有效的基础上,建立了某十层算例的整体模型,施加竖向荷载的同时施加水平倒三角形循环荷载作用,进而分析了该算例的滞回性能。研究表明:本文提出的简化分析模型不仅可以较准确的模拟该结构体系的延性和抗侧刚度,还可以有效预测结构的变形分布和非线性性能。  相似文献   

科尔沁湿草甸参考作物蒸散发模拟分析     

李霞  刘廷玺  段利民  王冠丽  童新  周亚军  杨晓君 《中国沙漠》2020,40(2):134-143

为探明气候变化下干旱半干旱地区湿草甸参考作物蒸散发(ET₀)影响因子,使用FAO 56 P-M模型对科尔沁湿草甸ET₀进行模拟,利用涡度相关系统对模型的适用性进行评价,并通过通径分析及指标敏感性分析对ET₀的影响因子进行辨识。结果表明:(1)小时尺度模拟精度最高,日尺度次之,月尺度较差,小时尺度上晴、阴、雨3种天气条件下模拟效果不同,晴天最优,阴雨天较差。(2)ET₀年内变化呈单峰曲线状,生长季明显高于非生长季,集中在3—10月,占全年89.79%。生长季典型晴天ET₀逐小时分布特征遵循倒“U”单峰型变化规律。(3)通径分析结果显示,对ET₀的通径系数以及对回归方程估测可靠程度E的总贡献均表现为VPD(饱和水汽压差) > T_min(最低气温) > R_n(冠层表面净辐射)>u₂(2 m高度风速),即VPD为影响ET₀最重要的因子;指标敏感性分析中,在去除VPD后引起的E变化最大,说明ET₀对VPD的变化最为敏感,其次为u₂、T_min和R_n。  相似文献   

顾及基准站坐标动态特性与稳定性的区域框架构建     

蒋光伟  王斌  王延伟  李康  孙洋洋 《地球物理学进展》2020,(1):8-15

基准站受构造运动与非线性因素的影响,如何构建高精度、现势性强的精细区域框架是位置服务与形变分析的的关键.笔者提出顾及基准站坐标动态特性与稳定性的区域框架构建方法.以我国西部与东部某城市的多年连续运行基准站数据为例进行试算比对,试验结果表明:该方法是可行的,较好地顾及了基准站的坐标特性与非线性影响,考虑了基准站的垂直运动规律,可构建高精度的区域基准,可发现区域基准的微动态变化.  相似文献   

双稀疏字典和FISTA的地震数据去噪          下载免费PDF全文

张良  韩立国  方金伟  张盼  刘争光 《地球物理学报》2019,62(7):2671-2683

地震数据的随机噪声去除是地震数据处理中的一项重要步骤，双稀疏字典提供了两层稀疏模型，比单层稀疏模型可以更好地去除噪声.该方法首先利用contourlet变换对地震数据进行稀疏表示，然后在contourlet域中使用快速迭代收缩阈值算法（fast iterative shrinkage-thresholding algorithm，FISTA）对初始字典系数进行更新，接着采用数据驱动紧标架（data-driven tight frame，DDTF）在contourlet域中得到DDTF字典并通过FISTA得到更新后的字典系数，最后通过DDTF字典和更新后的字典系数获得新的contourlet系数，并对新的contourlet系数进行硬阈值和contourlet反变换得到去噪后的数据.通过模拟数据和实际数据的实验证明：与固定基变换去噪方法相比，该方法可以自适应地对地震数据进行稀疏表示，在地震数据较为复杂时得到更高的信噪比；与字典学习去噪方法相比，该方法不仅拥有较快的去噪速度，而且克服了字典学习因为缺少先验约束造成瑕疵的缺点.  相似文献   

Nonlinear analysis of masonry structures using fiber-section line elements     

Matteo Peruch  Enrico Spacone  Guido Camata 《地震工程与结构动力学》2019,48(12):1345-1364

For seismic analysis of unreinforced masonry (URM) buildings characterized by a box-like behavior, a widely accepted model is based on the equivalent frame idealization of walls. The equivalent frame model uses 1D elements to represent the vertical piers and horizontal spandrels which are connected by rigid nodes. The mechanical characterization of the elements is one of the crucial aspects to predict reasonably the building seismic behavior. Through the comparison with pseudo-static and dynamic experimental tests performed on two-story full-scale buildings, this paper validates the frame modeling in the OpenSees framework, which includes a fiber-section force-based beam element for the axial-flexural behavior, coupled with a cyclic shear-deformation phenomenological law.  相似文献   

Analysis of Anomalous Characteristics of Regional Crustal Deformation before the September 16th, 2019 Zhangye MS5.0 Earthquake, Gansu, China     

MA Haiping  WANG Qian  ZHANG Bo  WU Shanyi  WANG Pengtao  DOU Xiying  LI Minjuan 《中国地震研究》2020,34(2):210-218

To study the crustal movement in the vicinity of the epicenter before the Zhangye M_S5.0 earthquake in 2019, the characteristics of crustal deformation before the earthquake are discussed through the GPS velocity field analysis based on the CMONOC data observed from GPS. The baseline time series between two continuous GPS stations and the strain time series of an area among several stations are analyzed in the epicenter area. The resulting time series of baseline azimuth around the epicenter reflects that the energy of the fault in the northern margin of Qilian Mountain is accumulated continuously before 2017. Besides, the movement trend of azimuth slows down after 2017, indicating the stress accumulation on both sides of the seismogenic fault zone has reached a certain degree. The first shear strain and EW-direction linear strain in the epicentral area of the Zhangye M_S5.0 earthquake remain steady after 2017, and the surface strain rate decreases gradually after 2016. It is illustrated that there is an obvious deformation loss at the epicentral region three years before the earthquake, indicating that a certain degree of strain energy is accumulated in this area before the earthquake.  相似文献   

The δ60/58Ni Values of Twenty‐Six Selected Geological Reference Materials     

Weihan Li  Jian‐Ming Zhu  Decan Tan  Guilin Han  Zhouqiao Zhao  Guangliang Wu 《Geostandards and Geoanalytical Research》2020,44(3):523-535

The high‐precision δ^60/58Ni values of twenty‐six geological reference materials, including igneous rocks, sedimentary rocks, stream sediments, soils and plants are reported. The δ^60/58Ni values of all samples were determined by double‐spike MC‐ICP‐MS (Nu Plasma III). Isotope standard solution (NIST SRM 986) and geological reference materials (BHVO‐2, BCR‐2, JP‐1, PCC‐1, etc.) were used to evaluate the measurement bias and intermediate precision over a period of six months. Our results show that the intermediate precision of Ni isotope determination was 0.05‰ (2s, n = 69) for spiked NIST SRM 986 and typically 0.06‰ for actual samples, and the δ^60/58Ni _{NIST SRM 986} values were in excellent agreement with previous studies. Eighteen high‐precision Ni isotope ratios of geological reference materials are first reported here, and their δ^60/58Ni values varied from ?0.27‰ to 0.52‰, with a mean of 0.13 ± 0.34‰ (2s, n = 18). Additionally, SGR‐1b (0.56 ± 0.04‰, 2s), GSS‐1 (?0.27 ± 0.06‰, 2s), GSS‐7 (?0.11 ± 0.01‰, 2s), GSD‐10 (0.46 ± 0.06‰, 2s) and GSB‐12 (0.52 ± 0.06‰, 2s) could potentially serve as candidate reference materials for Ni isotope fractionation and comparison of Ni isotopic compositions among different laboratories.  相似文献   

Stable carbon isotope signatures of cellulose in macrophytes collected from three eutrophic lakes in China     

《Limnologica》2020

Aquatic plants are essential for maintaining the diversity and stability of a lake ecosystem. Stable carbon isotopes (δ¹³C) of macrophytes have been widely used as a powerful tool to study ecological processes and paleoenvironmental evolution in lakes. Varying results are obtained when using the δ¹³C of macrophytes to study the changes in the lake environment at different spatio-temporal scales. Thus, sample preparation and subsequent laboratory analyses are crucial for studying environmental changes using the isotopic signal retained in the macrophytes, and are essential for the interpretation of isotope-environment relationships. This study analyzed the δ¹³C of different tissue components of macrophytes in three lakes of the lower Yangtze River basin, and a correlation analysis was performed on aquatic environments influencing the δ¹³C values in the different tissue components of macrophytes. The test results showed the difference between the δ¹³C values of the whole sample and cellulose. Relative analyses indicated that the major factors contributing to the δ¹³C variability in macrophytes were pH and the concentration of dissolved inorganic carbon (DIC). The δ¹³C of α-cellulose (δ¹³C_AC) is more sensitive to environmental variables than that of the whole sample (δ¹³C_W) and holocellulose (δ¹³C_HC). The results of this study imply that extraction of α-cellulose is a prerequisite for research on the changes in lake environment using δ¹³C of macrophytes. This study aims to provide theoretical and data basis for further research on the environmental and ecological change using stable carbon isotopes of aquatic plants.  相似文献   

Determination of Radiogenic 87Sr/86Sr and Stable δ88/86SrSRM987 Isotope Values of Thirteen Mineral,Vegetal and Animal Reference Materials by DS‐TIMS     

Jean‐Michel Brazier  Anne‐Dsire Schmitt  Eric Pelt  Damien Lemarchand  Sophie Gangloff  Tho Tacail  Vincent Balter 《Geostandards and Geoanalytical Research》2020,44(2):331-348

This work presents new ⁸⁷Sr/⁸⁶Sr and δ^88/86Sr_SRM987 isotopic values of thirteen mineral, vegetal and animal reference materials. Except for UB‐N, all our results are consistent with previously published data. Our results highlight intermediate precisions among the best presently published and a non‐significant systematic shift with the calculated δ^88/86Sr_SRM987 mean values for the three most analysed reference materials in the literature (i.e., IAPSO, BCR‐2 and JCp‐1). By comparison with the literature and between two distinct digestions, a significant bias of δ^88/86Sr_SRM987 values was highlighted for two reference materials (UB‐N and GS‐N). It has also been shown that digestion protocols (nitric and multi‐acid) have a moderate impact on the δ^88/86Sr_SRM987 isotopic values for the Jls‐1 reference materials suggesting that a nitric acid digestion of carbonate can be used without significant bias from partial digestion of non‐carbonate impurities. Different δ^88/86Sr_SRM987 values were measured after two independent Sr/matrix separations, according to the same protocol, for a fat‐rich organic reference material (BCR‐380R) and have been related to a potential post‐digestion heterogeneity. Finally, the δ^88/86Sr_SRM987 value differences measured between animal‐vegetal and between coral‐seawater reference materials agree with the previously published results, highlighting an Sr isotopic fractionation along the trophic chain and during carbonate precipitation.  相似文献   

Barium Isotopic Compositions in Thirty‐Four Geological Reference Materials Analysed by MC‐ICP‐MS     

Ya‐Jun An  Xin Li  Zhao‐Feng Zhang 《Geostandards and Geoanalytical Research》2020,44(1):183-199

Measurement of Ba isotope ratios of widely available reference materials is required for interlaboratory comparison of data. Here, we present new Ba isotope data for thirty‐four geological reference materials, including silicates, carbonates, river/marine sediments and soils. These reference materials (RMs) cover a wide range of compositions, with Ba mass fractions ranging from 6.4 to 1900 µg g^?1, SiO₂ from 0.62% to 90.36% m/m and MgO from 0.08% to 41.03% m/m. Accuracy and precision of our data were assessed by the analyses of duplicate samples and USGS rock RMs. Barium isotopic compositions for all RMs were in agreement with each other within uncertainty. The variation of δ^138/134Ba in these RMs was up to 0.7‰. The shale reference sample, affected by a high degree of chemical weathering, had the highest δ^138/134Ba (0.37 ± 0.03‰), while the stream sediment obtained from a tributary draining carbonate rocks was characterised by the lowest δ^138/134Ba (?0.30 ± 0.05‰). Geochemical RMs play a fundamental role in the high‐precision and accurate determination of Ba isotopic compositions for natural samples with similar matrices. Analyses of these RMs could provide universal comparability for Ba isotope data and enable assessment of accuracy for interlaboratory data.  相似文献