利用CEEMD分析中国沿海GNSS站高程时序变化     

刘豪  周东旭  王盼龙  张化疑  王永康  姜传苓 《测绘通报》2020,(3):39-43,77

利用完备经验模态分解方法（CEEMD）对我国沿海地区6个GNSS基准站（2010—2018）的高程时序数据进行了处理分析。结果表明：CEEMD在高程时间序列分析中具有一定的优越性，可准确分解出各GNSS站高程时序中存在的周、月、季节、年等变化周期项，其中周年运动是主要贡献项，各站高程时间序列的短周期变化与潮汐变化周期具有密切关联性；沿海GNSS站的地面沉降既具有区域的一致性，又存在区域间差异性，其中D区DBJO、DZJJ站呈现先下降后上升的趋势，N区NZUH、NWZU站呈下降趋势，B区的BZMW呈上升趋势，而同海区的BLHT站则呈显著的下降趋势。  相似文献   

云南广南县老寨湾金矿地质特征及找矿标志     

高李阳  顾雄  吴小梅 《云南地质》2020,(1):71-75

广南县老寨湾金矿位于滇、黔、桂“金三角”重要成矿区带上,金矿体矿体呈似层状赋存于断层构造破碎带或层间构造破碎带中,构造控矿明显。矿体围岩均为下泥盆统坡松冲组第一段(D1ps1)硅化石英砂岩;矿床成因属中-低温热液叠加改造型金矿床,断层构造、硅化等矿化蚀变及地球化学异常是重要的找矿标志。  相似文献   

Digital mapping of coastal boulders – high-resolution data acquisition to infer past and recent transport dynamics     

Fabian Boesl  Max Engel  Rodrigo C. Eco  JaN B. Galang  Lia A. Gonzalo  Francesca Llanes  Eva Quix  Helmut Brückner 《Sedimentology》2020,67(3):1393-1410

Coastal boulder fields provide clues to long-term frequency-magnitude patterns of coastal flooding events and have the potential to play an important role in coastal hazard assessment. Mapping boulders in the field is time and labour-intensive, and work on intertidal reef platforms, as in the present study, is physically challenging. By addressing coastal scientists who are not specialists in remote sensing, this contribution reports on the possibilities and limitations of digital applications in boulder mapping in Eastern Samar, Philippines, where recent supertyphoons Haiyan and Hagupit induced high waves, coastal flooding and boulder transport. It is demonstrated how satellite imagery of sub-metre resolution (from Pléiades and WorldView-3 imagery) enables efficient analysis of transport vectors and distances of larger boulders, reflecting variation in latitudes of both typhoon tracks and approaching angles of typhoon-generated waves. During the investigated events, boulders with a-axes of up to 8 m were clearly identified to have been shifted for up to 32 m, mostly along the seaward margin of the boulder field. It is, however, hard to keep track of smaller boulders, and the length of a-axes and b-axes including their orientation is often impossible to map with sufficient accuracy. Orthophotographs and digital surface models created through the application of an unmanned aerial vehicle and the ‘Structure from Motion’ technique provide ultra-high-resolution data, and have the potential to not only improve the results of satellite image analysis, but also those from field mapping and may significantly reduce overall time in the field. Orthophotographs permit unequivocal mapping of a-axes and b-axes including their orientation, while precise values for c-axes can be derived from the respective digital surface models. Volume of boulders is best inferred from boulder-specific Structure from Motion-based three-dimensional models. Battery power, flight speed and altitude determine the limits of the area covered, while patches shielded by the boulders are difficult to resolve. For some tasks, field mapping remains mandatory and cannot be replaced by currently available remote sensing tools: for example, sampling for rock type, density and age dating, recording of lithological separation of boulders from the underlying geological unit and of geomorphic features on a millimetre to decimetre-scale, or documentation of fine-grained sediment transport in between the boulders in supratidal settings. In terms of future events, the digital products presented here will provide a valuable reference to track boulder transport on a centimetre to decimetre-scale and to better understand the hydrodynamics of extreme-wave events on a fringing reef coastline.  相似文献   

Stochastic bivariate time series models of waves in the North Sea and their application in simulation-based design     

《Applied Ocean Research》2019

In this paper, we present and evaluate three long-term wave models for application in simulation-based design of ships and marine structures. Designers and researchers often rely on historical weather data as a source for ocean area characteristics based on hindcast datasets or in-situ measurements. The limited access and size of historical datasets reduces repeatability of simulations and analyses, making it difficult to assess the sampling variability of performance and loads on marine vessels and structures. Markov, VAR and VARMA wave models, producing independent long-term time series of significant wave height (H_s) and spectral peak period (T_p), is presented as possible solutions to this problem. The models are tested and compared by addressing how the models affect interpretation of design concepts and the ability to replicate statistical and physical characteristics of the wave process. Our results show that the VAR and VARMA models perform sufficiently in describing design performance, but does not capture the physical process fully. The Markov model is found to perform worst of the tested models in the applied tests, especially for measures covering several consecutive sea states.  相似文献   

海上风电升压站平台高程确定标准的合理性研究     

潘晓春 《海洋技术学报》2019,38(6):83-88

为保证海上风电升压电站建设的经济合理与安全可靠,合理确定海上风电升压电站平台高程十分必要。文中从波浪与潮位的遭遇组合、最大波高取值与现行相关标准的比较、最大波峰高度计算的合理性等方面,全面分析了确定海上风电升压站平台高程各组成项取值标准的合理性,研究认为现行标准明显偏高。建议海上升压站平台底部高程按"100年一遇极端高水位+重现期50年波列累积频率1%的最大波峰高度+安全超高"确定。结合工程实例计算分析,按本文建议可使海上升压站平台高程明显降低,从而节省工程造价,还可减轻升压站工程对周边风机的遮蔽影响,以达到多发电量的效果。  相似文献   

二次曲面与最小二乘配置的组合模型在GPS高程异常拟合中的应用     

吕建伟  张志华  张新秀  刘祖昱 《测绘通报》2020,(5):127

在工程实践应用中，为了有效利用GPS高程数据，减少对传统水准测量的依赖，提高GPS高程异常的拟合精度便显得十分重要。为此，本文在介绍二次曲面拟合和最小二乘配置拟合基本原理分析、算法过程推导的基础上，提出了一种新的高程异常拟合方法。首先在二次曲面拟合的基础上，计算得到原始观测数据与拟合数据之间的残差序列，然后采用最小二乘配置模型对包括二次曲面拟合模型误差的综合误差进行优化减弱，最后得到新的高程异常。通过实例，将二次曲面拟合法，最小二乘配置法与文中提出的新方法进行比较分析。结果表明：新的组合方法的拟合预测精度要明显优于最小二乘配置及二次曲面拟合。  相似文献   

Inter-comparison of remote sensing platforms for height estimation of mango and avocado tree crowns     

《International Journal of Applied Earth Observation and Geoinformation》2020

To support the adoption of precision agricultural practices in horticultural tree crops, prior research has investigated the relationship between crop vigour (height, canopy density, health) as measured by remote sensing technologies, to fruit quality, yield and pruning requirements. However, few studies have compared the accuracy of different remote sensing technologies for the estimation of tree height. In this study, we evaluated the accuracy, flexibility, aerial coverage and limitations of five techniques to measure the height of two types of horticultural tree crops, mango and avocado trees. Canopy height estimates from Terrestrial Laser Scanning (TLS) were used as a reference dataset against height estimates from Airborne Laser Scanning (ALS) data, WorldView-3 (WV-3) stereo imagery, Unmanned Aerial Vehicle (UAV) based RGB and multi-spectral imagery, and field measurements. Overall, imagery obtained from the UAV platform were found to provide tree height measurement comparable to that from the TLS (R² = 0.89, RMSE = 0.19 m and rRMSE = 5.37 % for mango trees; R² = 0.81, RMSE = 0.42 m and rRMSE = 4.75 % for avocado trees), although coverage area is limited to 1–10 km² due to battery life and line-of-sight flight regulations. The ALS data also achieved reasonable accuracy for both mango and avocado trees (R² = 0.67, RMSE = 0.24 m and rRMSE = 7.39 % for mango trees; R² = 0.63, RMSE = 0.43 m and rRMSE = 5.04 % for avocado trees), providing both optimal point density and flight altitude, and therefore offers an effective platform for large areas (10 km²–100 km²). However, cost and availability of ALS data is a consideration. WV-3 stereo imagery produced the lowest accuracies for both tree crops (R² = 0.50, RMSE = 0.84 m and rRMSE = 32.64 % for mango trees; R² = 0.45, RMSE = 0.74 m and rRMSE = 8.51 % for avocado trees) when compared to other remote sensing platforms, but may still present a viable option due to cost and commercial availability when large area coverage is required. This research provides industries and growers with valuable information on how to select the most appropriate approach and the optimal parameters for each remote sensing platform to assess canopy height for mango and avocado trees.  相似文献   

Moving from plot-based to hillslope-scale assessments of savanna vegetation structure with long-range terrestrial laser scanning (LR-TLS)     

《International Journal of Applied Earth Observation and Geoinformation》2020

Reliable quantification of savanna vegetation structure is critical for accurate carbon accounting and biodiversity assessment under changing climate and land-use conditions. Inventories of fine-scale vegetation structural attributes are typically conducted from field-based plots or transects, while large-area monitoring relies on a combination of airborne and satellite remote sensing. Both of these approaches have their strengths and limitations, but terrestrial laser scanning (TLS) has emerged as the benchmark for vegetation structural parameterization – recording and quantifying 3D structural detail that is not possible from manual field-based or airborne/spaceborne methods. However, traditional TLS approaches suffer from similar spatial constraints as field-based inventories. Given their small areal coverage, standard TLS plots may fail to capture the heterogeneity of landscapes in which they are embedded. Here we test the potential of long-range (>2000 m) terrestrial laser scanning (LR-TLS) to provide rapid and robust assessment of savanna vegetation 3D structure at hillslope scales. We used LR-TLS to sample entire savanna hillslopes from topographic vantage points and collected coincident plot-scale (1 ha) TLS scans at increasing distances from the LR-TLS station. We merged multiple TLS scans at the plot scale to provide the reference structure, and evaluated how 3D metrics derived from LR-TLS deviated from this baseline with increasing distance. Our results show that despite diluted point density and increased beam divergence with distance, LR-TLS can reliably characterize tree height (RMSE = 0.25–1.45 m) and canopy cover (RMSE = 5.67–15.91%) at distances of up to 500 m in open savanna woodlands. When aggregated to the same sampling grain as leading spaceborne vegetation products (10–30 m), our findings show potential for LR-TLS to play a key role in constraining satellite-based structural estimates in savannas over larger areas than traditional TLS sampling can provide.  相似文献   

微分求积法在结构动力分析中的应用     

任争争  梅雨辰  李鸿晶 《震灾防御技术》2018,13(4):829-838

微分求积法（DQM）是1种求解微分方程初（边）值问题的数值方法，通常以较小的计算工作量即可获得较高的数值精度。这种方法应用于工程领域时多用来解决梁、板等结构的静力分析或结构特征值分析等问题，即对边值问题的微分方程的求解。结构动力分析属于初值问题，荷载和结构反应都具有特殊性，直接套用DQM求解边值问题并不能获得问题的解。本文尝试利用微分求积原理建立求解结构动力反应的具体方法。借鉴单元法的思想，将荷载持时划分为若干个时步，在每个时步内对动态荷载和结构反应进行离散，然后用DQM对时步逐个进行求解，得到体系在整个时域内的反应过程。通过对3种不同自振周期的线弹性单自由度体系在不同频率简谐激励下反应的计算，阐释了本文方法的可行性以及高精度、高效率的特点，通过数值试验确定了时步内相对较优的节点数，并为时步长度的选取提供了建议。  相似文献   

基于ROMS和4DVAR的沿轨与网格化SSH数据同化效果评价   总被引：1，自引：1，他引：0  

周超杰  丁效华  张杰  杨俊刚  马强 《海洋学报(英文版)》2018,37(9):50-58

Remote sensing products are significant in the data assimilation of an ocean model. Considering the resolution and space coverage of different remote sensing data, two types of sea surface height(SSH) product are employed in the assimilation, including the gridded products from AVISO and the original along-track observations used in the generation. To explore their impact on the assimilation results, an experiment focus on the South China Sea(SCS) is conducted based on the Regional Ocean Modeling System(ROMS) and the four-dimensional variational data assimilation(4 DVAR) technology. The comparison with EN4 data set and Argo profile indicates that, the along-track SSH assimilation result presents to be more accurate than the gridded SSH assimilation, because some noises may have been introduced in the merging process. Moreover, the mesoscale eddy detection capability of the assimilation results is analyzed by a vector geometry–based algorithm. It is verified that, the assimilation of the gridded SSH shows superiority in describing the eddy's characteristics, since the complete structure of the ocean surface has been reconstructed by the original data merging.  相似文献