考虑填充墙影响的钢筋混凝土厂房结构地震易损性分析     

梁志强  徐超  温增平 《震灾防御技术》2019,14(4):707-718

采用对角斜撑模拟纵向填充墙的作用，建立考虑填充墙和不考虑填充墙厂房结构模型，采用拉丁超立方抽样技术建立考虑材料不确定性的结构分析样本，基于随机Pushover分析确定结构不同破坏状态下的统计参数。综合考虑结构材料强度及输入地震动不确定性的影响，通过非线性时程分析开展单层钢筋混凝土厂房结构易损性研究，在此基础上比较结构横、纵向易损性的差异，研究填充墙对结构易损性的影响。研究结果表明:钢筋混凝土厂房结构体系横向地震易损性显著大于纵向地震易损性；对纵向结构体系而言，加入填充墙会明显降低结构易损性，但在相同强度的地震动作用下，填充墙破坏程度比主体结构严重，这与厂房结构的实际震害特征相符。  相似文献   

张家口蔚县农村房屋抗震性能调查及统计分析     

马旭东  牛露  刘晓丹  刘龙  茅远哲  关恒瑜  刘贾贾  刘志辉 《震灾防御技术》2019,14(4):829-837

为进一步了解蔚县地区农村房屋的抗震性能，在该地区选取43个村庄、7732栋房屋进行实地调查和统计分析。主要调查房屋结构、建筑材料、房屋抗震构造措施等内容，分析各结构类型房屋抗震薄弱环节及房屋抗震性能，并统计分析经济、交通、地形等因素与房屋结构类型及抗震性能的关系，提出提高该地区农村房屋抗震性能的建议。  相似文献   

Ⅶ度抗震设防下牧区居住建筑节能技术研究   总被引：1，自引：1，他引：0       下载免费PDF全文

薛芸 《地震工程学报》2018,40(1):60-65

对抗震设防下的牧区居民建筑进行节能设计,在提高能源利用率及降低能源消耗方面具有重要意义。传统的建筑节能技术主要通过降低建筑的热能消耗来提高能源利用,存在节能效果差且单一的问题。对此,在Ⅶ度抗震设防下,采用ANSYS软件,引入Block Lanczos法对牧区居住建筑结构的模态进行分析,计算出建筑地震作用,并通过分析牧区居住建筑围护结构及门窗材质来优化建筑节能技术。实验结果表明,在内蒙古牧区居住建筑采用改进提出的建筑节能技术,可有效降低能源消耗,从而能够有效利用能源,使其具有一定的优势。  相似文献   

建筑用玻化微珠保温混凝土剪力墙抗震结构设计          下载免费PDF全文

朱保华  韩丽婷 《地震工程学报》2018,40(5):963-968

传统方法主要通过导热系数低的材料和增加墙体厚度来达到抗震效果。该方法不仅浪费能源而且抗震性能较差,因此对建筑用玻化微珠保温混凝土剪力墙抗震结构进行设计,构建玻化微珠保温混凝土本构模型,获得与抗震结构相关的理论数据。根据所获取的数据,选择板壳单元SHELL63作为玻化微珠保温混凝土剪力墙抗震结构单元。依据抗震结构材料参数以及抗震结构单元,采用ANSYS软件模拟构建玻化微珠保温混凝土剪力墙抗震结构。分析实验结果可知,所设计建筑节能抗震结构的抗震性能较好,实际运用价值高。  相似文献   

圆柱形支撑大跨度建筑结构强震冲击分析模型仿真   总被引：3，自引：2，他引：1       下载免费PDF全文

吴海波  王新妮 《地震工程学报》2018,40(1):48-53

圆柱形支撑大跨度建筑稳定性较差,不能在强震冲击下保持稳定的结构状态。为解决此问题,设计圆柱形支撑大跨度建筑结构强震下冲击分析仿真模型,通过圆柱分析法则的确定、有限元支撑模拟分析与监测、圆柱形支撑体系承载能力分析以完成模型的仿真分析与监测。基于此对大跨度建筑结构强震冲击进行静力分析,调整强震冲击下模型的结构,完成模型的搭建。模拟强震冲击环境,设计对比实验结果表明,应用圆柱形支撑大跨度建筑结构强震下冲击分析仿真模型,可明确圆柱形支撑大跨度建筑薄弱点,发现稳定性较差建筑结构单元,达到提升圆柱形支撑大跨度建筑在强震冲击下稳定性的目的。  相似文献   

填充墙刚度影响的实测高层建筑增量动力分析          下载免费PDF全文

周云  裴熠麟  周祎  方亮  易伟建 《地震工程学报》2018,40(5):883-890

高层结构中的填充墙在地震作用下与周围结构构件之间的相互作用十分复杂,对建筑结构的整体抗震性能具有较大影响。然而我国规范在设计阶段通常不考虑填充墙对结构抗震性能的影响,统一采用周期折减系数来考虑其刚度变化引起的内力变化,因此准确评估填充墙对结构抗震性能的影响具有重要意义。本文在对一栋框-剪结构和一栋剪力墙高层建筑进行随机振动测试的基础上,利用Perform-3D对每栋高层分别建立了3种分析模型。其中对未考虑填充墙作用的结构模型,分别采取规范建议值和实测结果值两种方式进行周期折减。对通过添加斜撑单元来考虑填充墙作用的结构模型,利用环境激励测试识别获得的结构模态信息进行模型修正。对该3种模型进行了增量动力分析,探讨潜在危险性水平地震作用下填充墙对高层建筑抗震性能的影响。结果表明,填充墙增加了结构在弹性阶段的整体初始刚度,但随着地震动强度的增加逐渐丧失对结构刚度的贡献作用。相比考虑了填充墙作用的模型计算结果,规范建议的周期折减系数较为保守。同时研究发现,填充墙对高层框-剪结构的影响程度要比剪力墙结构大。  相似文献   

China’s rural revitalization and development: Theory,technology and management     

Liu  Yansui  Zang  Yuzhu  Yang  Yuanyuan 《地理学报(英文版)》2020,30(12):1923-1942

Journal of Geographical Sciences - The urban-rural transformation from dichotomy to integration is a gradual process. Like rural areas in many countries, Chinese rural society is experiencing a...  相似文献   

A comparison of neighbourhood relations based on ordinary Delaunay diagrams and area Delaunay diagrams: an application to define the neighbourhood relations of buildings     

Hiroyuki Usui  Akihiro Teraki  Kei-ichi Okunuki  Toshiaki Satoh 《International journal of geographical information science》2020,34(11):2177-2203

ABSTRACT

The aim of this article is to describe a convenient but robust method for defining neighbourhood relations among buildings based on ordinary Delaunay diagrams (ODDs) and area Delaunay diagrams (ADDs). ODDs and ADDs are defined as a set of edges connecting the generators of adjacent ordinary Voronoi cells (points representing centroids of building polygons) and a set of edges connecting two centroids of building polygons, which are the generators of adjacent area Voronoi cells, respectively. Although ADDs are more robust than ODDs, computation time of ODDs is shorter than that of ADDs (the order of their computation time complexity is O(nlogn)). If ODDs can approximate ADDs with a certain degree of accuracy, the former can be used as an alternative. Therefore, we computed the ratio of the number of ADD edges to that of ODD edges overlapping ADDs at building and regional scales. The results indicate that: (1) for approximately 60% of all buildings, ODDs can exactly overlap ADDs with extra ODD edges; (2) at a regional scale, ODDs can overlap approximately 90% of ADDs with 10% extra ODD edges; and (3) focusing on judging errors, although ADDs are more accurate than ODDs, the difference is only approximately 1%.  相似文献   

Discussion of user-defined parameters for recursive subspace identification: Application to seismic response of building structures     

Shieh-Kung Huang  Jun-Da Chen  Kenneth J. Loh  Chin-Hsiung Loh 《地震工程与结构动力学》2020,49(15):1738-1757

Structural damage assessment under external loading, such as earthquake excitation, is an important issue in structural safety evaluation. In this regard, an appropriate data analysis and system identification technique is required to interpret the measured data and to identify the state of the structure. Generally, the recursive system identification algorithm is used. In this study, the recursive subspace identification (RSI) algorithm based on the matrix inversion lemma algorithm with oblique projection technique (RSI-Inversion-Oblique) is applied to investigate the time-varying dynamic characteristics. The user-defined parameters used in the RSI-Inversion-Oblique technique are carefully discussed, which include the size of the data Hankel matrix (i), model order to extract the physical modes, and forgetting factor (FF) to detect the time-varying system modal frequencies. Response data from the Northridge earthquake from the Sherman Oaks building (CSMIP) is used as an example to examine a systematic method to determine the suitable user-defined parameters in RSI. It is concluded that the number of rows in the data Hankel matrix significantly influences the identification of the time-varying fundamental modal frequency of the structure. An algorithmic model order selection method using the eigenvalue distribution of RSI-Inversion can detect the system modal frequencies at each appending data window without causing any abnormality.  相似文献   

Dynamic loading tests and seismic response analysis of a stud-type damper composed of multiple friction units with disc springs     

Takeshi Sano  Kazutaka Shirai  Yasumasa Suzui  Yoshikazu Utsumi 《地震工程与结构动力学》2020,49(13):1259-1280

This paper presents an experimental study on the performance of a shear-sliding stud-type damper composed of multiple friction units with high-tension bolts and disc springs. A numerical evaluation of the response reduction effects achieved by the stud-type damper is also presented. In dynamic loading tests, the behavior of stud-type multiunit friction damper specimens was investigated. Three different full-scale damper specimens, which were composed of five, six, or seven friction units with two or four sliding surfaces, were incorporated into loading devices for testing. The stud-type friction dampers demonstrated stable rigid-plastic hysteresis loops without any remarkable decrease in the sliding force even when subjected to repetitive loading, in addition to showing no unstable behavior such as lateral buckling. The damper produced a total sliding force approximately proportional to the number of sliding surfaces and friction units. The total sliding force of the stud-type damper can thus be estimated by summing the contributions of each friction unit. In an earthquake response simulation, the control effects achieved by stud-type dampers incorporated into an analytical high-rise building model under various input waves, including long-period, long-duration and pulse-like ground motions, were evaluated. A satisfactory response reduction was obtained by installing the developed stud-type dampers into the main frame without negatively impacting usability and convenience in terms of building planning.  相似文献