青藏高原及邻区未来地震活动性趋势数值分析          下载免费PDF全文

董培育  石耀霖  程惠红  乔学军 《地球物理学报》2020,63(3):1155-1169

区域中长期地震危险性数值分析研究,需要对其初始构造应力场有所了解,但目前以及未来一段时期内仍无法直接观测到深部孕震层区域的应力场状况.本文首先基于岩石库仑-摩尔破裂准则,利用青藏高原及邻区百年历史范围内的强震信息,来反演估算该区域的初始应力场.然后,考虑区域构造应力加载及强震造成的应力扰动共同作用,重现了历史强震的发展过程.然而对于初始应力场的反演估算,本文仅能给出区域其上下限的极限值,并不能唯一确定.因此,采用Monte Carlo随机法,进行大量独立的随机试验计算,生成数千种有差异的区域初始应力场模型,且保证每种模型都能令历史强震有序发生,但未来应力场演化过程不尽相同.最后,将数千种模型在未来时间段内的危险性预测结果集成为数理统计结果,据此给出了区域未来的地震危险性概率分布图.初步结果显示未来强震危险性概率较高地区集中在巴颜喀拉块体边界及鲜水河断裂带地区.  相似文献   

2018年9月8日墨江地震及周边地区构造应力场特征分析   总被引：1，自引：0，他引：1       下载免费PDF全文

李泽潇  万永革  崔华伟  李振月  胡晓辉  黄骥超  靳志同 《地球物理学报》2020,63(4):1431-1443

2018年9月8日,云南省墨江县发生MS5.9地震并伴随一系列余震,探究该地震周围的应力场对于理解该地震的发生机制和后续地震的发展趋势具有着重要的参考意义.本研究收集了震源及其邻区中前人研究和Global CMT所给出的震源机制资料,对该地区进行了构造应力场反演,并同时利用反演得到的应力张量模拟墨江地区的震源机制解表现.结果表明:(1)在应力轴整体分布上,自西向东σ1轴(压轴)从NNE-SSW向逐渐转向NNW-SSE向,σ3轴(张轴)从WWN-EES向逐渐转向WWS-EEN向,张轴呈弧形分布,压轴呈放射状分布.(2)在应力轴倾伏角上,研究区域内的压应力轴和张应力轴倾伏角都比较小,即两轴均接近水平.(3)R值分布大体是在东南部相较于西北部大,结合当地地质背景分析得到,物质逃逸自西北向东南呈逐渐变缓的趋势.(4)利用反演得到的应力张量和应力状态计算墨江地震震源区的相对剪应力和相对正应力大小.由此推测,墨江地震恰好发生在相对剪切应力值和相对正应力正值最大的节面上.从而可以确定墨江地震的发震节面的基本参数:走向216.32°,倾角86.91°,滑动角0.27°,相对剪应力值0.9,相对正应力值0.3.本研究为此次墨江地震的发震背景和地震动力学研究提供了基础性资料.  相似文献   

An endemic freshwater mussel species from the Orontes River basin in Turkey and Syria represents duck mussel’s intraspecific lineage: Implications for conservation     

《Limnologica》2020

Amik Lake or, historically, Lake of Antioch, was a large freshwater body in the lower Orontes River basin (Hatay Province, Turkey) that was drained in the 1940s–1970s. Several endemic animal species were described from this lake, including the freshwater mussel Anodonta pseudodopsis Locard, 1883 (Bivalvia: Unionidae) characterized by a large rounded shell covered by a peculiar yellow or yellowish-brown periostracum. Molecular analyses of topotypes of this nominal taxon collected from the former lake’s tributaries in the Amik Plain indicate that it is an intra-specific lineage of the widespread Anodonta anatina (Linnaeus, 1758) based on the mitochondrial COI and 16S rRNA, and the nuclear 28S rRNA gene fragments. Geometric morphometric analyses using the lectotype and topotypes of Anodonta pseudodopsis support our DNA-based hypothesis on the status of this nominal taxon. A new synonymy is provided as follows: Anodonta anatina = Anodonta pseudodopsis syn. nov. The syntype of Anodonta pseudodopsis SMF 5129 “See von Antiochia” (Senckenberg Research Institute and Natural History Museum, Frankfurt, Germany) is designated here to be the lectotype of this nominal taxon. Finally, we conclude that Anodonta anatina range covers the Orontes River basin in Turkey and Syria and the Nahr al-Kabir al-Shamali River in the Latakia Governorate of Syria. This intraspecific lineage of Anodonta anatina and other freshwater mussels of the Middle East are highly threatened due to multiple anthropogenic impacts and must be a focus of international conservation efforts. The Karasu River in eastern Turkey hosts viable populations of all freshwater mussel species of the Orontes’s fauna and can be considered one of the most important water bodies for the conservation of these imperiled animals in the region.  相似文献   

Bidirectional shaking table tests of a low-cost friction sliding system with flat-inclined surfaces     

Miguel B. Brito  Mitsuyoshi Akiyama  Yoshitaka Ichikawa  Hiroki Yamaguchi  Riki Honda  Naomitsu Ishigaki 《地震工程与结构动力学》2020,49(8):817-837

A novel low-cost friction sliding system for bidirectional excitation is developed to improve the seismic performance of reinforced concrete (RC) bridge piers. The sliding system is a spherical prototype developed by combining a central flat surface with an inclined spherical segment, characterized by stable oscillation and a large reduction in response accelerations on the flat surface. The inclined part provides a restoring force that limits the residual displacements of the system. Conventional steel and concrete are employed to construct a flat-inclined spherical surface atop an RC pier. The seismic forces are dissipated through the frictions generated during the sliding movements; hence, the seismic resilience of bridges can be ensured with a low-cost design solution. The proposed system is fabricated utilizing a mold created by a three-dimensional printer, which facilitates the use of conventional concrete to construct spherical shapes. The concrete surface is lubricated with a resin material to prevent abrasion from multiple input ground motions. To demonstrate the effectiveness of the system, bidirectional shaking table tests are conducted in the longitudinal and transverse directions of a scaled bridge model. The effect of the inclination angle and the flat surface size is investigated. The results demonstrate a large decrease in response acceleration when the system exhibits circular sliding displacement. Furthermore, the inclination angle that generates the smallest residual displacement is identified experimentally.  相似文献   

Runoff response of a small agricultural basin in the argentine Pampas considering connectivity aspects     

María Guadalupe Ares  Marcelo Varni  Celio Chagas 《水文研究》2020,34(14):3102-3119

  相似文献   

Investigation of the elevation of saltwater wedge due to subsurface dams     

Qinpeng Chang  Tianyuan Zheng  Youyuan Chen  Xilai Zheng  Marc Walther 《水文研究》2020,34(22):4251-4261

Subsurface dams are rather effective and used for the prevention of saltwater intrusion in coastal regions around the world. We carried out the laboratory experiments to investigate the elevation of saltwater wedge after the construction of subsurface dams. The elevation of saltwater wedge refers to the upward movement of the downstream saltwater wedge because the subsurface dams obstruct the regional groundwater flow and reduce the freshwater discharge. Consequently, the saltwater wedge cannot further extend in the longitudinal direction but rises in the vertical profile resulting in significant downstream aquifer salinization. In order to quantitatively address this issue, field-scale numerical simulations were conducted to explore the influence of various dam heights, distances, and hydraulic gradients on the elevation of saltwater wedge. Our investigation shows that the upward movement of the saltwater wedge and its areal extension in the vertical domain of the downstream aquifer become more severe with a higher dam and performed a great dependence on the freshwater discharge. Furthermore, the increase of the hydraulic gradient and the dam distance from the sea boundary leads to a more pronounced wedge elevation. This phenomenon comes from the variation of the freshwater discharge due to the modification of dam height, location, and hydraulic gradient. Large freshwater discharge can generate greater repulsive force to restrain the elevation of saltwater wedge. These conclusions provide theoretical references for the behaviour of the freshwater–seawater interface after the construction of subsurface dams and help optimize the design strategy to better utilize the coastal groundwater resources.  相似文献   

基岩倾角对盆地地震响应的影响分析          下载免费PDF全文

卓发成 《地震工程学报》2020,42(4):1035-1042

为了研究盆地基岩倾角对盆地地表动力反应的影响,选取了一个跨度2 km,深度500 m的二维成层盆地为研究对象进行有限元动力反应分析。以持时0.25 s的狄拉克脉冲作为输入地震动,探讨了P波和SV波垂直入射时,盆地基岩倾角从10°\,20°\,30°\,40°依次增加的情况下盆地地震反应。结果表明:入射波在倾斜基岩处发生波型转化,同时产生面波,在盆地中心区域发生汇聚;随着基岩倾角的增加地表中心处的卓越频率有减小的趋势。  相似文献   

利用CEEMD分析中国沿海GNSS站高程时序变化     

刘豪  周东旭  王盼龙  张化疑  王永康  姜传苓 《测绘通报》2020,(3):39-43,77

利用完备经验模态分解方法（CEEMD）对我国沿海地区6个GNSS基准站（2010—2018）的高程时序数据进行了处理分析。结果表明：CEEMD在高程时间序列分析中具有一定的优越性，可准确分解出各GNSS站高程时序中存在的周、月、季节、年等变化周期项，其中周年运动是主要贡献项，各站高程时间序列的短周期变化与潮汐变化周期具有密切关联性；沿海GNSS站的地面沉降既具有区域的一致性，又存在区域间差异性，其中D区DBJO、DZJJ站呈现先下降后上升的趋势，N区NZUH、NWZU站呈下降趋势，B区的BZMW呈上升趋势，而同海区的BLHT站则呈显著的下降趋势。  相似文献   

eLoran系统新型信号波形设计及其性能评估          下载免费PDF全文

李婉清  刘中伟  李实锋  叶清琳 《全球定位系统》2020,45(2):13-20

增强型罗兰导航系统(eLoran)作为全球卫星导航系统(GNSS)的备份系统,是国家定位导航授时(PNT)安全的重要基础设施.针对目前标准eLoran信号存在易受交叉干扰、天波干扰,通信数据传输速率低等的问题,本文基于标准罗兰信号体制提出了两种波形改进方法(衰减函数法与对称波形法)并对新型波形进行性能评估.实验结果表明,两种方法能够有效缩短波形持续时间,加速后沿波形下降,减小发射机功耗.对称波形法能够大幅减小波形持续时间,但缩短波形持续时间也将改变原信号波形的频谱特性,利用衰减函数法可以最大程度保证信号的频谱性能.综合分析可知,新型波形能够有效利用时域资源,空余的时间可用于增加传输信号,进而提高数据调制技术的性能.  相似文献   

MapGIS到ArcGIS格式的数据转换方法研究——以麻阳县地质图为例     

李双莲  周丽芸  胡航 《测绘与空间地理信息》2020,(4):185-188

湖南地矿行业多采用MapGIS软件进行地质数据的管理和分析,然而,该软件在数据处理和分析方面略显不足,尤其在处理大数据时更是力不从心,且其中的67版本难以满足2000坐标系统的要求。因此,为了更加有效地使用已有的数据,并充分发挥其价值,本文以麻阳县地质图为例,通过研究MapGIS和ArcGIS软件之间的异同,总结出一套较为完整的MapGIS到ArcGIS格式的数据转换方法,使得转换前后的数据在数量、样式、属性等方面基本保持一致。  相似文献