Investigating the vibration properties of integrated ceiling systems considering interactions with surrounding equipment     

Liangjie Qi  Keiichiro Kunitomo  Masahiro Kurata  Yoshiki Ikeda 《地震工程与结构动力学》2020,49(8):772-793

Studies on recent earthquakes highlighted that buildings with minimal structural damage still suffer from extensive damage and failure of nonstructural components. The dropping and damage of suspended ceiling systems, which typically consist of acceleration-sensitive nonstructural elements, resulted in lengthy functional disruptions and extended recovery time. This article experimentally and analytically examined the vibration properties of an integrated ceiling system considering the interactions with surrounding electrical equipment. The theoretical stiffness and corresponding frequency of electrical equipment were initially derived and then verified by subsequent vibration tests and numerical analyses. The seismic performance of the air conditioner (AC) was evaluated with different installment configurations based on design spectra and floor response spectra. Vibration tests of the suspended integrated ceiling system considering the interactions with surrounding equipment showed that the inclusion of peripheral constraints increased the first horizontal vibration frequency of the ceiling system by a factor of approximately 6. The natural frequencies of all components in the integrated ceiling system were almost identical, which was attributed to the coupled behavior between the ceiling panels and surrounding equipment, emphasizing the effect of interactions between adjacent components during dynamic analysis. Based on the above experimental investigation, an associated numerical model of the integrated ceiling system was created. Finally, corresponding parametric studies that included the interactions with surrounding equipment, reinforcing braces of ACs and strengthening members at the rise-up location between two elevations were performed.  相似文献   

Identification of factors influencing hydrologic model performance using a top-down approach in a large number of U.S. catchments     

Carolina Massmann 《水文研究》2020,34(1):4-20

Investigating the performance that can be achieved with different hydrological models across catchments with varying characteristics is a requirement for identifying an adequate model for any catchment, gauged or ungauged, just based on information about its climate and catchment properties. As parameter uncertainty increases with the number of model parameters, it is important not only to identify a model achieving good results but also to aim at the simplest model still able to provide acceptable results. The main objective of this study is to identify the climate and catchment properties determining the minimal required complexity of a hydrological model. As previous studies indicate that the required model complexity varies with the temporal scale, the study considers the performance at the daily, monthly, and annual timescales. In agreement with previous studies, the results show that catchments located in arid areas tend to be more difficult to model. They therefore require more complex models for achieving an acceptable performance. For determining which other factors influence model performance, an analysis was carried out for four catchment groups (snowy, arid, and eastern and western catchments). The results show that the baseflow and aridity indices are the most consistent predictors of model performance across catchment groups and timescales. Both properties are negatively correlated with model performance. Other relevant predictors are the fraction of snow in the annual precipitation (negative correlation with model performance), soil depth (negative correlation with model performance), and some other soil properties. It was observed that the sign of the correlation between the catchment characteristics and model performance varies between clusters in some cases, stressing the difficulties encountered in large sample analyses. Regarding the impact of the timescale, the study confirmed previous results indicating that more complex models are needed for shorter timescales.  相似文献   

Investigation of the elevation of saltwater wedge due to subsurface dams     

Qinpeng Chang  Tianyuan Zheng  Youyuan Chen  Xilai Zheng  Marc Walther 《水文研究》2020,34(22):4251-4261

Subsurface dams are rather effective and used for the prevention of saltwater intrusion in coastal regions around the world. We carried out the laboratory experiments to investigate the elevation of saltwater wedge after the construction of subsurface dams. The elevation of saltwater wedge refers to the upward movement of the downstream saltwater wedge because the subsurface dams obstruct the regional groundwater flow and reduce the freshwater discharge. Consequently, the saltwater wedge cannot further extend in the longitudinal direction but rises in the vertical profile resulting in significant downstream aquifer salinization. In order to quantitatively address this issue, field-scale numerical simulations were conducted to explore the influence of various dam heights, distances, and hydraulic gradients on the elevation of saltwater wedge. Our investigation shows that the upward movement of the saltwater wedge and its areal extension in the vertical domain of the downstream aquifer become more severe with a higher dam and performed a great dependence on the freshwater discharge. Furthermore, the increase of the hydraulic gradient and the dam distance from the sea boundary leads to a more pronounced wedge elevation. This phenomenon comes from the variation of the freshwater discharge due to the modification of dam height, location, and hydraulic gradient. Large freshwater discharge can generate greater repulsive force to restrain the elevation of saltwater wedge. These conclusions provide theoretical references for the behaviour of the freshwater–seawater interface after the construction of subsurface dams and help optimize the design strategy to better utilize the coastal groundwater resources.  相似文献   

Quantifying groundwater sensitivity and resilience over peninsular India     

Nikhil Kumar  Jhilam Sinha  Chandra A. Madramootoo  Manish Kumar Goyal 《水文研究》2020,34(26):5327-5339

Groundwater in India plays an important role to support livelihoods and maintain ecosystems and the present rate of depletion of groundwater resources poses a serious threat to water security. Yet, the sensitivity of the hydrological processes governing groundwater recharge to climate variability remains unclear in the region. Here we assess the groundwater sensitivity (precipitation–recharge relationship) and its potential resilience towards climatic variability over peninsular India using a conceptual water balance model and a convex model, respectively in 54 catchments over peninsular India. Based on the model performance using a comprehensive approach (Nash Sutcliffe Efficiency [NSE], bias and variability), 24 out of 54 catchments are selected for assessment of groundwater sensitivity and its resilience. Further, a systematic approach is used to understand the changes in resilience on a temporal scale based upon the convex model and principle of critical slowing down theory. The results of the study indicate that the catchments with higher mean groundwater sensitivity (GWS) encompass high variability in GWS over the period (1988–2011), thus indicating the associated vulnerability towards hydroclimatic disturbances. Moreover, it was found that the catchments pertaining to a lower magnitude of mean resilience index incorporates a high variability in resilience index over the period (1993–2007), clearly illustrating the inherent vulnerability of these catchments. The resilience of groundwater towards climatic variability and hydroclimatic disturbances that is revealed by groundwater sensitivity is essential to understand the future impacts of changing climate on groundwater and can further facilitate effective adaptation strategies.  相似文献   

高层高强钢组合偏心支撑框架抗震性能简化分析          下载免费PDF全文

洪敏  秦瑞  王凤  高永国  高中南  李少华 《地震工程学报》2020,42(2):332-336

高强钢组合偏心支撑钢框架是一种新型的抗震结构体系,为分析其抗震性能,利用ABAQUS有限元软件建立了简化分析模型。在验证该简化模型合理有效的基础上,建立了某十层算例的整体模型,施加竖向荷载的同时施加水平倒三角形循环荷载作用,进而分析了该算例的滞回性能。研究表明:本文提出的简化分析模型不仅可以较准确的模拟该结构体系的延性和抗侧刚度,还可以有效预测结构的变形分布和非线性性能。  相似文献   

锚固站对BDS自主导航精度的影响分析     

龚晓颖  蔡诗响 《测绘通报》2020,(4):68-75

介绍了自主导航的轨道确定及时间同步观测方程。以北斗仿真全星座为对象，通过采用仿真星间及卫星与地面锚固站间观测值，进行了60 d自主导航解算，分别探讨了锚固站数量及锚固站观测连续性对北斗卫星导航系统（BDS）3类卫星自主导航精度的影响。结果表明：锚固站数量及观测连续性对RERR及CERR无影响；加入1个锚固站即可显著改进URE结果精度，继续增加锚固站数量虽然可进一步提高URE精度但其改进效果有限；锚固站观测中断时间越长，其对应自主导航精度越低。因此，在BDS自主导航运行模式下应保持较高的锚固站观测频次以保证自主导航精度；另外，锚固站数量及观测连续性对北斗系统3类卫星自主导航精度的影响无显著差异。  相似文献   

面向数字孪生城市的智能化全息测绘   总被引：2，自引：0，他引：2  

顾建祥  杨必胜  董震  杨常红 《测绘通报》2020,(6):134-140

以大数据、物联网、人工智能、虚拟现实、云计算、智能驾驶等新技术为代表的信息化浪潮席卷全球，数字世界与物理世界正形成两大平行发展、相互作用的体系，数字孪生技术应运而生。随着物联网技术（IOT）的发展，数字孪生的理念被引入到智慧城市建设中来，深刻影响着城市规划、建设与治理。笔者所在单位面向数字孪生城市和自然资源统一监管对测绘地理信息的新需求，在全国开创性地开展了面向数字孪生城市的智能化全息测绘试点工作。本文结合上海市智能化全息测绘试点工作，从数字孪生城市、数字孪生城市对地理信息的新需求、智能化全息测绘关键技术及测绘成果等方面展开了论述，重点介绍了智能化全息测绘的技术体系和产品体系，以及在社会各领域的应用成果。  相似文献   

基于OSM的浮动车轨迹数据校正方法     

胡向勇  郭圆 《测绘通报》2020,(10):139

浮动车轨迹数据具有覆盖范围广、更新周期短、获取成本低等特点，对于地图的生产和更新具有重要意义，但是由于受到卫星信号被遮挡及多路径效应的影响，其精度普遍较低。本文采用一种基于OSM作为参考数据的方式对浮动车轨迹数据进行校正。首先通过一种分层时空地图匹配的方式将轨迹数据与OSM进行匹配；然后采用引力模型对数据进行校正；最后在武汉市出租车轨迹数据上进行了试验。结果表明，本文提出的数据校正方法可以有效地提高浮动车轨迹数据的精度。  相似文献   

BDS卫星钟差半参数平差模型异常数据探测与处理     

李文涛  颜雄  夏磊  任青阳  陈洁  潘雄 《测绘学报》2020,49(1):55-64

针对北斗卫星钟差数据中出现钟跳、粗差等异常数据频次较高的问题,将半参数平差模型引入BDS的钟差数据的处理过程中。首先,在考虑系统误差的同时,改进了常用的钟差模型;其次,综合考虑异常数据和系统误差,利用补偿最小二乘原理和极值求解方法,详细推导了分离异常数据前后参数和非参数估计值与相应观测值改正数的关系表达式,实现了异常数据的定值、参数求解和系统误差分离。在此基础上,引入Cook距离,给出了利用参数分量和非参数分量的Cook距离及混合Cook距离,去判断异常值的位置,并给出了一些参数的选取方法及相应的处理措施,实现了卫星钟差异常数据的定位和定值以及部分系统误差的分离。最后,采用武汉大学GNSS中心提供的采样间隔为5 min的北斗卫星精密钟差数据,将本文方法与常用方法进行了试验对比。试验结果表明,本文方法能够有效地识别并处理卫星钟差数据中的异常值,有效克服了基于经验阈值钟差异常数据探测方法的不足,且该方法对于量级较小的异常钟差数据也有很好的探测效果,一定程度丰富了现有的BDS钟差数据质量控制方法。  相似文献   

基于像元二分模型的地表植被覆盖度估算模块化设计与实现     

赵威成  张红华  马福义  叶欣 《北京测绘》2020,(3):285-288

地表植被覆盖度是的一种应用广泛的定量遥感产品,在水文、生态、区域变化等方面都具有重要的意义。像元二分模型是应用最多的一种遥感估算地表覆盖度的方法。目前,用遥感的方法进行地表植被覆盖度估算没有完整、系统的工具,用户只能逐步进行操作,效率低下,鉴于上述情况,本文运用IDL交互式数据语言,基于ENVI二次开发了一个植被覆盖度估算程序,取得了一定的成效,对遥感定量产品的生产、应用具有一定意义。  相似文献