桥梁沉井基础抗震性能研究现状及展望          下载免费PDF全文

王义  陈兴冲  张熙胤  张永亮  刘正楠 《世界地震工程》2020,(1):044-55

随着国内外大跨桥梁特别是跨海桥梁建设的迅速发展，沉井基础在桥梁基础中所占的比例越来越大。虽然沉井基础作为1种刚性基础具有良好的力学性能，然而震害实践表明沉井基础在地震作用下也并非万无一失。通过分析国内外典型桥梁沉井基础的震害特征发现，沉井基础的地震破坏与桩基础有显著差异，且与埋置深度有直接关系；研究表明:地震作用下沉井基础的破坏机理及地基承载力与静力作用下明显不同，但目前在该方面的研究还较为欠缺；总结和对比了现有几种沉井基础-土相互作用研究方法，并分析了几种研究方法的优缺点和适用场合；同时也归纳和对比了各国抗震规范对桥梁沉井基础的基本规定、适用范围、计算方法和构造规定等方面的内容。最后结合现有的研究现状对沉井基础抗震性能研究的发展方向进行了展望，此外，随着我国跨海、跨江及跨库区大跨桥梁建设的发展，地震力和波浪力等多灾害因素共同作用下深水沉井基础桥梁破坏机理及设计方法的研究势在必行。  相似文献   

Crack nucleation in saturated porous media     

Luc Dormieux  Eric Lemarchand  Thomas Carlioz  Laurent Jeannin 《国际地质力学数值与分析法杂志》2020,44(5):553-574

Crack nucleation has been the subject of important contributions in the last two last decades. However, it seems that few attention has been granted to the case of saturated porous media. This is the question addressed in the present paper which is devoted to nucleation in traction mode. From a physical point of view, nucleation is a sudden phenomenon, so that the material response is both adiabatic and undrained. In the spirit of the variational approach, the nucleated crack is viewed as the final state of a region of space in which the material undergoes a full damage process. In traction mode, the opening of a saturated crack in undrained condition induces a drop of fluid pressure. In case of low fluid compressibility, the presence of the fluid delays the brittle failure usually associated with nucleation, as long as the fluid pressure remains above the saturation vapor pressure. Nucleation is therefore possible only if a partial vaporization of the fluid takes place.  相似文献   

Three-dimensional finite element simulation of fracture propagation in rock specimens with pre-existing fissure(s) under compression and their strength analysis     

Ramin Pakzad  Shanyong Wang  Scott W. Sloan 《国际地质力学数值与分析法杂志》2020,44(10):1472-1494

A FORTRAN program, consistent with the commercially available finite element (FE) code ABAQUS, is developed based on a three-dimensional (3D) linear elastic brittle damage constitutive model with two damage criteria. To consider the heterogeneity of rock, the developed FORTRAN program is used to set the stiffness and strength properties of each element of the FE model following a Weibull distribution function. The reliability of the program is assessed against available experimental results for granite cylindrical specimens with a throughgoing, flat and inclined fissure. The calibration procedure of the material parameters is explained in detail, and it is shown that the compressive to tensile strength ratio can have a substantial influence on the failure response of the specimens. Numerical simulations are conducted for models with different levels of heterogeneity. The results show a smaller load bearing capacity for models with less homogeneity, representing gradual coalescence of fully damaged elements forming throughout the models during loading. The maximum load bearing capacity is studied for various combinations of inclination angles of two centrally aligned, throughgoing and flat fissures of equal length embedded in cylindrical models under uniaxial and multiaxial loading conditions. The key role of the compressive to tensile strength ratio is highlighted by repeating certain simulations with a lower compressive to tensile strength ratio. It is proven that the peak loads of the rock models with sufficiently small compressive to tensile strength ratios containing two throughgoing fissures of equal length are similar, provided that the minimum inclination angles of the models are the same. The results are presented and discussed with respect to the existing experimental findings in the literature, suggesting that the numerical model applied in this study can provide useful insight into the failure behaviour of rock-like materials.  相似文献   

A multiscaling‐based intensity–duration–frequency model for extreme precipitation          下载免费PDF全文

Hans Van de Vyver 《水文研究》2018,32(11):1635-1647

Rainfall intensity–duration–frequency (IDF) curves are a standard tool in urban water resources engineering and management. They express how return levels of extreme rainfall intensity vary with duration. The simple scaling property of extreme rainfall intensity, with respect to duration, determines the form of IDF relationships. It is supposed that the annual maximum intensity follows the generalized extreme value (GEV) distribution. As well known, for simple scaling processes, the location parameter and scale parameter of the GEV distribution obey a power law with the same exponent. Although, the simple scaling hypothesis is commonly used as a suitable working assumption, the multiscaling approach provides a more general framework. We present a new IDF relationship that has been formulated on the basis of the multiscaling property. It turns out that the GEV parameters (location and scale) have a different scaling exponent. Next, we apply a Bayesian framework to estimate the multiscaling GEV model and to choose the most appropriate model. It is shown that the model performance increases when using the multiscaling approach. The new model for IDF curves reproduces the data very well and has a reasonable degree of complexity without overfitting on the data.  相似文献   

Characteristics and Analysis of the Seismic Damage from the M_S7.0 Jiuzhaigou Earthquake in the Area between Songpan and Jiuzhaigou     

Yan Zhaolun  Peng Xiaobo  Li Shuguang  Hong Haichun 《中国地震研究》2018,32(2):173-188

This paper expounds the features of the buildings and analyzes the seismic disaster characteristics of the Jiuzhaigou M_S7. 0 earthquake in the area between Songpan and Jiuzhaigou. New buildings (especially the frame structure) had good anti-seismic performance,but brick-wood structures and brick-concrete structures sustained large amounts of damage in the earthquake. By computing the seismic damage index,we found that the seismic damage index of the frame structure was far less than that of civil structures and brick-wood structures. The seismic damage index of frame structures were all zero in the Ⅵ area,and increased rapidly with the increase of intensity,but the increasing range was reduced. We also discussed how to evaluate the intensity in areas where there was a lack of buildings or there was only one structure type,which can be referenced in future field work.  相似文献   

窑洞外形特征对结构抗震性能影响研究          下载免费PDF全文

王飞剑  刘如山  马朝晖 《地震工程学报》2018,40(5):910-918

调查发现山西北部农村地区农居窑洞多是独立式土坯窑洞,结构主要受力体系是土坯砌体砌筑拱结构,其建造无统一标准,外形样式存在差异。由于拱结构的内力分布对外形尺寸变化比较敏感,为研究窑洞外形特征对结构抗震性能影响,建立相应的有限元模型进行计算分析,对比不同外形特征窑洞在地震作用下的损伤情况,并结合历史震害,指出窑洞结构的薄弱位置。研究结果表明覆土较厚的窑洞容易损伤,连拱孔数较多窑洞的两侧位置更容易发生破坏,拱的曲线形状对结构抗震性能有一定影响,合理拱曲线窑洞的抗震性能优于一般形状窑洞。  相似文献   

Implementation of a coupled plastic damage distinct lattice spring model for dynamic crack propagation in geomaterials          下载免费PDF全文

Chao Jiang  Gao‐Feng Zhao 《国际地质力学数值与分析法杂志》2018,42(4):674-693

This paper studies dynamic crack propagation by employing the distinct lattice spring model (DLSM) and 3‐dimensional (3D) printing technique. A damage‐plasticity model was developed and implemented in a 2D DLSM. Applicability of the damage‐plasticity DLSM was verified against analytical elastic solutions and experimental results for crack propagation. As a physical analogy, dynamic fracturing tests were conducted on 3D printed specimens using the split Hopkinson pressure bar. The dynamic stress intensity factors were recorded, and crack paths were captured by a high‐speed camera. A parametric study was conducted to find the influences of the parameters on cracking behaviors, including initial and peak fracture toughness, crack speed, and crack patterns. Finally, selection of parameters for the damage‐plasticity model was determined through the comparison of numerical predictions and the experimentally observed cracking features.  相似文献   

典型砖木结构农居地震弹塑性有限元分析   总被引：1，自引：1，他引：0       下载免费PDF全文

姚新强  孙柏涛  陈宇坤  杨绪连 《地震工程学报》2018,40(1):32-40

针对我国农居结构中比例最高的砖木结构,选取典型结构运用ABAQUS有限元软件进行模态和地震时程弹塑性分析。给出M0.5和M5两种砌筑强度砖木结构农居的前三阶特征周期和振型,并与经验周期公式值进行对比分析,提出后者存在的问题和修改建议。选取天津波作为地震动时程输入,分别计算不同峰值加速度下两种砖木结构农居弹塑性地震反应,给出相应的拉损伤云图,并对结构的破坏特征进行分析,给出结构抗震薄弱部位。结果表明,砌筑强度是决定结构抗震能力的关键因素之一。  相似文献   

套管井偶极弯曲波频散向高频偏移的特性          下载免费PDF全文

李刚  吕伟国  崔志文  马俊  王克协  谢荣华  刘继生  吕秀梅 《地球物理学报》2018,61(1):379-388

对套管井偶极弯曲模式波的频散特性进行了系统的数值考察、实例对比和分析.发现套管井弯曲波频散曲线随地层横波速度的降低，特别是地层横波速度小于2000 m·s^-1以下，会迅速移向高频区，偶极弯曲波基础模式主频散区（或截止频率）可出现在13 kHz以上，以致超出了现行低频偶极子声波测井仪的激发与接收频带，这是一过去没有被研究者注意到的现象，并进一步被现场实例所证实.研究表明控制套管井弯曲波频散曲线主频散区位置的主要是钢套管的厚度和地层横波速度.对地层横波速度大于井孔流体声速的快速地层，在钢套管壁厚一定（8 mm）的情况下，频散曲线主频散区可移至11 kHz以上，可能出现的最大可能频域位置是同一井孔内径，井外全钢时的频散曲线上等于、小于地层横波速度那一段，这对各种地层和套管参数都是适用的.对地层横波速度小于等于井孔流体声速（1500 m·s^-1）的慢速地层，弯曲波频散曲线随地层横波速度的降低移向高频区的特点更为明显，可能移至16 kHz以上；而套管厚度的影响，也比快速地层大的多，对地层横波速度小于1380 m·s^-1的慢速地层，无论用多高的频率激发，都不能在现行使用的各类套管井（壁厚6~12 mm）中用偶极声波测井仪测到弯曲模式波.  相似文献   

基于类柔度差曲率和频率摄动的结构损伤识别          下载免费PDF全文

何容  谭亚可  郭琪璇  何伟 《地震工程学报》2020,42(4):825-832

为提高梁式结构损伤诊断的效率,提出一种基于类柔度差曲率和频率摄动的结构损伤识别方法。首先根据结构振动理论,研究广义柔度矩阵计算公式;再利用模态柔度对结构损伤灵敏性高的优点,改进基于柔度差曲率的损伤定位指标,定义类柔度差曲率LCFC损伤指标,并初步识别损伤;最后基于矩阵摄动进行结构损伤识别结果确认。考虑多种损伤工况,对一简支梁结构进行损伤识别数值模拟验证。结果表明:仅使用一阶模态,建立的类柔度差曲率LCFC指标对梁式结构损伤定位具有良好的诊断效果,且计算工作量小;对于含边界损伤单元的多损伤工况,当损伤程度大于10%时,LCFC指标识别有效;当损伤程度不大于25%时,各工况二阶摄动识别结果精度较高,相对误差较一阶摄动结果明显降低,证明了该方法的实用性、有效性和精确性。  相似文献