平端深海偏顶蛤(Gigantidas platifrons)实验室蓄养过程鳃部含菌上皮细胞超微结构动态变化研究     

钟兆山  王敏晓  孙园园  王孝程  陈浩  孙妍  李梦娜  李超伦 《海洋与湖沼》2020,51(4):952-959

平端深海偏顶蛤(Gigantidasplatifrons)是南海台西南冷泉区的典型优势物种,鳃丝上皮细胞内共生大量甲烷氧化菌,通过甲烷有氧氧化合成有机物为共生体系提供物质能量,是平端深海偏顶蛤赖以生存的重要能量来源器官,溶酶体在共生体系的营养互作和稳态维持中可能发挥重要作用,本研究使用电镜技术观测了常压培养过程中(0d,30d,90d)平端深海偏顶蛤共生体系中共生菌和溶酶体的动态变化,通过鳃上皮含菌细胞超显微结构的变化研究常压培养对深海共生体系的影响,并探讨溶酶体在宿主—共生菌营养传递和共生菌群稳态维持中的关键作用。研究发现,在原位状态样品中(0d)共生菌和溶酶体呈极化分布,细胞结构完整清晰;蓄养30d后,含菌细胞出现明显破碎,共生菌数量大幅降低,溶酶体数量、范围和消化程度大幅增加,对细胞顶端的甲烷氧化菌进行分解;而90d后,共生菌在溶酶体的作用下消失殆尽,鳃部有明显细胞脱落后留下的坑洞,细胞呈现空泡状,无法明确区分各种细胞组分。上述结果展示了长期常压蓄养过程中鳃上皮含菌细胞中溶酶体与甲烷氧化菌的动态变化,推测当共生菌丢失后溶酶体也同步降低活跃度,平端深海偏顶蛤在共生互作中通过溶酶体主导消化和调控共生菌。  相似文献   

滇西思茅盆地景谷地区曼岗组石英颗粒表面特征及其指示意义   总被引：2，自引：0，他引：2  

龚政  吴驰华  伊海生  张华  沈立建 《地质学报》2015,89(11):2053-2061

石英具有硬度大和化学稳定性高的特点,其颗粒表面特征能很好的反映沉积环境,通过扫描电镜观察石英表面微细特征是判别沉积环境行之有效的方法。思茅盆地白垩系曾一度被认为是陆相水成沉积,笔者通过野外识别及室内基础研究发现,景谷地区下白垩统曼岗组具有风成沉积特征,需对该套地层开展石英颗粒表面特征的系统研究来进一步确定其沉积相,研究结果表明:研究区曼岗组石英颗粒表面具有明显的风成特征,磨圆度高,普遍发育典型的蝶形撞击坑、新月形撞击坑、毛玻璃化表面,存在沙漠漆,极易与水成特征相区别;而其较强的溶蚀作用与沉淀作用则显示了当时干旱炎热的气候条件。在风成沉积确定的基础上,笔者再结合典型沉积构造,粒度分析、岩性特征等沉积特征进行综合分析,认为研究区曼岗组应属沙漠沉积。  相似文献   

拉萨市夏季大气降尘单颗粒矿物组成及其形貌特征   总被引：3，自引：0，他引：3       下载免费PDF全文

张学磊  邬光剑  岳雅慧  张成龙 《岩石矿物学杂志》2011,30(1):127-134

应用带能谱的电子扫描电镜(SEM-EDX)对拉萨市夏季正常天气下收集的大气自然沉降气溶胶样品进行分析,研究了拉萨市大气降尘矿物组成和各种物相形貌特征信息。拉萨市大气颗粒物含有硅酸盐颗粒、富钙颗粒、富铁颗粒、富碳颗粒(燃煤飞灰颗粒和燃油飞灰颗粒)和植物残体颗粒。根据颗粒物数量统计发现拉萨市大气颗粒物以硅酸盐颗粒为主,富钙颗粒和富铁颗粒次之,需要指出的是以燃油飞灰为主的富碳颗粒已占到一定比重,说明以燃油为主的机动车尾气对拉萨大气污染在加强。研究结果表明,大气降尘矿物成分及其形貌特征可以用作判定污染物来源的重要标志,拉萨大气中颗粒来源的多样性决定了治理措施也应综合进行。  相似文献   

Chromium Removal through Biosorption and Bioaccumulation by Bacteria from Tannery Effluents Contaminated Soil     

Mohammad Zubair Alam  Shamim Ahmad 《洁净——土壤、空气、水》2011,39(3):226-237

Four bacterial isolates (two resistant and two sensitive to chromium) were isolated from soil contaminated with tannery effluents at Jajmau (Kanpur), India, and were identified by 16S rDNA gene sequencing as Stenotrophomonas maltophilia, Exiguobacterium sp., Pantoea sp., and Aeromonas sp. Biosorption of chromium by dried and living biomasses was determined in the resistant and sensitive isolates. The effect of pH, initial metal concentration, and contact time on biosorption was studied. At pH 2.5 the living biomass of chromium resistant isolate Exiguobacterium sp. ZM‐2 biosorbed maximum amount of Cr⁶⁺ (29.8 mg/g) whereas the dried biomass of this isolate biosorbed 20.1 mg/g at an initial concentration of 100 mg/L. In case of chromate sensitive isolates, much difference was not observed in biosorption capacities between their dried and living biomasses. The maximum biosorption of Cr³⁺ was observed at pH 4.5. However, biosorption was identical in resistant and sensitive isolates. The data on chromium biosorption were analyzed using Langmuir and Freundlich isotherm model. The biosorption data of Cr⁶⁺ and Cr³⁺ from aqueous solution were better fitted in Langmuir isotherm model compared to Freundlich isotherm model. Metal recovery through desorption was observed better with dried biomasses compared to the living biomasses for both types of chromium ions. Bioaccumulation of chromate was found higher in chromate resistant isolates compared to the chromate sensitive isolates. Transmission electron microscopy confirmed the accumulation of chromium in cytoplasm in the resistant isolates.  相似文献   

A laboratory study on capillary sealing efficiency of Iranian shale and anhydrite caprocks     

《Marine and Petroleum Geology》2015

Caprock has the most important role in the long term safety of formation gas storage. The caprocks trap fluid accumulated beneath, contribute to lateral migration of this fluid and impede its upward migration. The rapid upward passage of invasive plumes due to buoyancy pressure is prevented by capillary pressure within these seal rocks. In the present study, two main seal rocks, from the Zagros basin in the southwest of Iran, a shale core sample of Asmari formation and an anhydrite core sample of Gachsaran formation, were provided. Absolute permeabilities of shale and anhydrite cores, considering the Klinkenberg effect, were measured as 6.09 × 10⁻¹⁸ and 0.89 × 10⁻¹⁸ m², respectively. Capillary sealing efficiency of the cores was investigated using gas breakthrough experiments. To do so, two distinct techniques including step by step and residual capillary pressure approaches were performed, using carbon dioxide, nitrogen and methane gases at temperatures of 70 and 90 °C, under confining pressures in the range 24.13–37.92 MPa. In the first technique, it was found that capillary breakthrough pressure of the cores varies in the range from 2.76 to 34.34 MPa. Moreover, the measurements indicated that after capillary breakthrough, gas effective permeabilities lie in range 1.85 × 10⁻²¹ – 1.66 × 10⁻¹⁹ m². In the second technique, the minimum capillary displacement pressure of shale varied from 0.66 to 1.45 MPa with the maximum effective permeability around 7.76 × 10⁻²¹ – 6.69 × 10⁻²⁰ m². The results indicate that anhydrite caprock of the Gachsaran formation provides proper capillary sealing efficacy, suitable for long term storage of the injected CO₂ plumes, due to its higher capillary breakthrough pressure and lower gas effective permeability.  相似文献   

共生黑钨矿与石英等多种矿物中流体包裹体的红外显微测温对比研究——以江西西华山石英脉钨矿床为例   总被引：3，自引：0，他引：3  

黄惠兰  常海亮  谭靖  李芳  张春红  周云 《岩石学报》2015,31(4):925-940

西华山钨矿床是一个产于燕山期花岗岩中的大脉型钨矿床。已有百余年的开采史。但在矿床成矿条件和成矿流体性质等方面一直存在不同认识。作者利用红外显微镜及其它相关设备,对西华山矿床不同中段样品中的黑钨矿、锡石、绿柱石、黄铁矿、闪锌矿、石英和萤石中的流体包裹体进行了详细对比研究。结果显示,蚀变花岗岩中造岩石英只见次生气液包裹体,晶洞水晶中只有原生包裹体,而云英岩石英中原生、次生包裹体均较发育。黑钨矿中以原生气液包裹体为主,在早期结晶的黑钨矿中还有较多的硅酸盐熔融包裹体,而晶洞中的黑钨矿和水晶一样——只有原生气液包裹体。绿柱石中除了硅酸盐包裹体外,主要是气液包裹体(多为次生)。其它锡石、黄铁矿、闪锌矿和萤石等都只有气液包裹体(原生或次生)。研究结果表明,西华山钨矿床的初始成矿流体是一种岩浆——热液过渡性流体,尔后才演变成单一的热水溶液,在这一过程中黑钨矿、黄铁矿、闪锌矿、萤石和石英等矿物不断晶出。矿床总的成矿温度大致为700~200℃,压力约为160~200MPa。各种气液包裹体的盐度主要为5.0%~10%Na Cleqv。文中还对这些数据的地质意义以及对脉钨矿床流体包裹体研究和数据解释中的某些问题进行了较深入的讨论。  相似文献   

河北沿岸微微型浮游植物的分布特征   总被引：1，自引：0，他引：1  

李洪波  刘述锡  林凤翱  冯志权 《海洋科学》2012,36(7):49-55

于2006年7月～ 2007年10月间,分4个季度调查了河北省沿岸微微型浮游植物的丰度和生物量及对浮游植物总生物量的贡献.结果显示:河北近岸海域聚球藻蓝细菌丰度为4.46×103个/mL(0.79×103～ 16.19×103个/mL),生物量(以碳计,下同)为1.31 mg/m3 (0.84～17.47 mg/m3),季节分布特征为秋季＞冬季＞夏季＞春季.微微型光合真核生物丰度为4.43×102个/mL (0.84×102～ 17.47×102个/mL),生物量为1.11mg /m3 (0.21～ 4.37 mg/m3),季节变化变现为秋季＞冬季＞春季＞夏季.微微型浮游植物对浮游植物总生物量的贡献年平均为5.32％(1.84％～ 8.91％),春季最高,秋季最低.温度在较冷季节(冬春季)里是影响聚球藻蓝细菌生长和分布的控制因素.总之,在近岸环境里,微微型浮游植物并不占优势.  相似文献   

线性偏振光激发的错位表面等离子体激元纳米结构聚焦     

宋文涛  林峰  方哲宇  朱星 《海洋学报》2010,32(10):6921-6926

利用扫描近场光学显微镜观测并分析了两种表面等离子体激元纳米结构对表面等离子体激元(SPP)的激发和聚焦现象. 用线偏振光照射有半个周期相位差的环状沟槽结构与有半个周期位相差的环状狭缝结构,得到了单点的SPP聚焦. 有限时域差分法的模拟结果验证了实验中观测的现象. 这两种相位错位的表面等离子体激元纳米结构,突破了由于干涉导致的线偏振光不能得到单个聚焦点的限制. 与采用径向偏振光激发而得到单个聚焦点的方法相比,线偏振光不需要聚焦,也不需要将光束中心对准纳米结构的几何中心即可得到单点聚焦.  相似文献   

Application of Atomic Force Microscopy to Observation of Marine Bacteria   总被引：3，自引：0，他引：3  

Tomohiko Nishino  Eiko Ikemoto  Kazuhiro Kogure 《Journal of Oceanography》2004,60(2):219-225

The atomic force microscopy (AFM) is a recently developed, bench-top instrument that can image the surface structures of biological specimens at high resolution with simultaneous measurement of their size. This paper describes the application of AFM to marine bacteria. Both natural and cultured bacteria were retained on a filter or placed on glass, washed, air-dried and observed by AFM. The instrumental condition, the choice of suitable filter, effect of fixation and filtration, comparison with epifluorescent microscopic (EFM) count, and the size and shape of bacterial cells were investigated. An Isopore filter was best for concentration and subsequent observation because of its surface flatness. Cross section images showed that both rod and coccoid cells were flattened, the former usually having a two-humped shape. Bacterial cells were differentiated from non-living particles based on their cross section shape and size. Bacterial counts by AFM and EFM showed good agreement. Although size measurement is easily done by the instrument, AFM tends to overestimate the size of microspheres. More work is thus needed on the size measurement of living organisms. Because AFM easily provides images of natural bacterial cells at high magnification, it can be used as a new tool to study the fine structures of marine bacteria. This revised version was published online in July 2006 with corrections to the Cover Date.  相似文献   

Defining the Potential of Nanoscale Re‐Os Isotope Systematics Using Atom Probe Microscopy          下载免费PDF全文

Luke Daly  Phil A. Bland  Svetlana Tessalina  David W. Saxey  Steven M. Reddy  Denis Fougerouse  William D.A. Rickard  Lucy V. Forman  Alexandre La Fontaine  Julie M. Cairney  Simon P. Ringer  Bruce F. Schaefer  Daniel Schwander 《Geostandards and Geoanalytical Research》2018,42(3):279-299

Atom probe microscopy (APM) is a relatively new in situ tool for measuring isotope fractions from nanoscale volumes (< 0.01 μm³). We calculate the theoretical detectable difference of an isotope ratio measurement result from APM using counting statistics of a hypothetical data set to be ± 4δ or 0.4% (2s). However, challenges associated with APM measurements (e.g., peak ranging, hydride formation and isobaric interferences), result in larger uncertainties if not properly accounted for. We evaluate these factors for Re‐Os isotope ratio measurements by comparing APM and negative thermal ionisation mass spectrometry (N‐TIMS) measurement results of pure Os, pure Re, and two synthetic Re‐Os‐bearing alloys from Schwander et al. (2015, Meteoritics and Planetary Science, 50, 893) [the original metal alloy (HSE) and alloys produced by heating HSE within silicate liquid (SYN)]. From this, we propose a current best practice for APM Re‐Os isotope ratio measurements. Using this refined approach, mean APM and N‐TIMS ¹⁸⁷Os/¹⁸⁹Os measurement results agree within 0.05% and 2s (pure Os), 0.6–2% and 2s (SYN) and 5–10% (HSE). The good agreement of N‐TIMS and APM ¹⁸⁷Os/¹⁸⁹Os measurements confirms that APM can extract robust isotope ratios. Therefore, this approach permits nanoscale isotope measurements of Os‐bearing alloys using the Re‐Os geochronometer that could not be measured by conventional measurement principles.  相似文献