A machine learning approach for predicting computational intensity and domain decomposition in parallel geoprocessing     

Peng Yue  Fan Gao  Boyi Shangguan  Zheren Yan 《International journal of geographical information science》2020,34(11):2243-2274

ABSTRACT

High performance computing is required for fast geoprocessing of geospatial big data. Using spatial domains to represent computational intensity (CIT) and domain decomposition for parallelism are prominent strategies when designing parallel geoprocessing applications. Traditional domain decomposition is limited in evaluating the computational intensity, which often results in load imbalance and poor parallel performance. From the data science perspective, machine learning from Artificial Intelligence (AI) shows promise for better CIT evaluation. This paper proposes a machine learning approach for predicting computational intensity, followed by an optimized domain decomposition, which divides the spatial domain into balanced subdivisions based on the predicted CIT to achieve better parallel performance. The approach provides a reference framework on how various machine learning methods including feature selection and model training can be used in predicting computational intensity and optimizing parallel geoprocessing against different cases. Some comparative experiments between the approach and traditional methods were performed using the two cases, DEM generation from point clouds and spatial intersection on vector data. The results not only demonstrate the advantage of the approach, but also provide hints on how traditional GIS computation can be improved by the AI machine learning.  相似文献   

南海东北部内潮的模态结构和传播     

刘倩  谢晓辉  尚晓东  陈桂英  汪宏 《海洋学报(英文版)》2019,38(9):12-23

The evolution of energy, energy flux and modal structure of the internal tides(ITs) in the northeastern South China Sea is examined using the measurements at two moorings along a cross-slope section from the deep continental slope to the shallow continental shelf. The energy of both diurnal and semidiurnal ITs clearly shows a～14-day spring-neap cycle, but their phases lag that of barotropic tides, indicating that ITs are not generated on the continental slope. Observations of internal tidal energy flux suggest that they may be generated at the Luzon Strait and propagate west-northwest to the continental slope in the northwestern SCS. Because the continental slope is critical-supercritical with respect to diurnal ITs, about 4.6 kJ/m~2 of the incident energy and 8.7 kW/m of energy flux of diurnal ITs are reduced from the continental slope to the continental shelf. In contrast, the semidiurnal internal tides enter the shelf because of the sub-critical topography with respect to semidiurnal ITs.From the continental slope to the shelf, the vertical structure of diurnal ITs shows significant variation, with dominant Mode 1 on the deep slope and dominant higher modes on the shelf. On the contrary, the vertical structure of the semidiurnal ITs is stable, with dominant Mode 1.  相似文献   

Effects of long-term cyclic horizontal loading on bucket foundations in saturated loose sand     

《Applied Ocean Research》2019

A 1-g model experimental study was conducted to investigate the accumulated rotations and unloading stiffness of bucket foundations in saturated loose sand. One-way horizontal cyclic loading was applied to model bucket foundations with embedment ratios 0.5 and 1.0. Up to 10⁴ cycles of loading were applied at a frequency of 0.2 Hz varying load amplitudes. The accumulated rotation of the bucket foundations increased with the number of cycles and the load amplitudes. Empirical equations were proposed to describe the accumulated rotation of the foundations. The unloading stiffness of foundations increased with the number of cycles but decreased with an increase in load amplitude. The initial unloading stiffness of L/D = 1.0 (L is skirt length; D is foundation diameter) was approximately twice that of L/D = 0.5. Excess pore water pressure difference of 50% was observed between L/D = 0.5 and 1.0. The suction and static capacity of the bucket increased with increase of bucket embedment ratio with a difference of 69.5% and 73.6% respectively between L/D = 0.5 and 1.0.  相似文献   

大气负荷对新疆地区地壳形变和地面重力变化的影响     

王海涛  王斌  王伟  章传银 《大地测量与地球动力学》2019,39(2):189-194

基于ECMWF全球大气模型和中国地面气候资料日值数据集中新疆及周边的气象站气压数据，根据弹性地壳形变理论，采用移去-恢复法，利用负荷格林函数法和球谐函数法，计算新疆及周边区域2011~2015年大气负荷变化对地壳垂直、水平形变的影响，同时采用大气导纳方法计算大气变化对地面重力的影响。结果表明，大气负荷对新疆地区垂直形变的影响达到cm级，对地面重力的影响可达10 μGal；大气负荷影响具有明显的季节性。  相似文献   

地震作用下纤维编织网增强钢筋混凝土柱的抗震性能分析          下载免费PDF全文

张童  雷真  朱争光  吴亚玲 《地震工程学报》2020,42(1):57-62,72

为了解地震作用下纤维编织网增强钢筋混凝土柱的抗震性能,采用钢筋、混凝土、纤维编织网浇筑纤维编织网增强钢筋混凝土柱,编织网主材为碳、玻璃纤维束;利用电液伺服加载系统为试件加载地震作用,监测相关数据,部分试件置入氯化钠溶液进行多次干湿循环。不同环境下的实验结果显示:纤维编织网层数越多,纤维编织网增强钢筋混凝土柱承载能力越强,抗震性能越好;配箍间距较大时,纤维编织网增强钢筋混凝土柱的抗震性能仅在地震作用的后期呈现较差状态;干湿循环次数越多,纤维编织网增强钢筋混凝土柱承载力越弱,抗震性能越差。对于氯盐环境而言,可增加纤维编织网增强钢筋混凝土柱的抗腐蚀措施改善抗震性能。适当增加纤维编织网的数量、降低配箍间距有利于提升纤维编织网增强钢筋混凝土柱的抗震性能。  相似文献   

强震下混凝土剪力墙受弯模拟及测试实验研究          下载免费PDF全文

戴勤友  张正瑞 《地震工程学报》2020,42(2):337-344

为提高混凝土剪力墙受弯性能计算的准确度,开展强震下混凝土剪力墙受弯性能试验研究。选取1个混凝土剪力墙对比试件和3个测试试件作为研究对象,对试件施加垂直荷载和水平荷载,模拟强烈地震作用力。试验前期准备工作完成后,建立分离式有限元模型,通过计算混凝土在受压和受拉状态下的损伤弹塑性刚度,完成对有限元模型中混凝土塑性损伤分析,在此基础上,计算混凝土剪力墙受弯承载力。利用有限元模型对3个测试试件进行模拟试验,结果表明,强烈地震后3个试件的荷载-位移曲线均与实际位移值接近,且混凝土剪力墙受弯承载力试验结果与实际值的误差在2%以内,表明试验研究方法具有一定的可行性,数值模拟结果较为准确。  相似文献   

自由段先注浆对预应力锚索抗拔试验结果影响研究     

杨庆光  柳雄  刘杰  何杰  梁凌川  陈斌 《岩土力学》2020,41(10):3317-3325

为了解决无法采用已注浆锚索进行抗拔试验问题，基于界面脱黏剪切模型，利用荷载传递和弹性变形理论，考虑锚索锚固段与自由段长度比Lb /La的影响，建立了采用自由段已注浆锚索抗拔试验结果评价锚索抗拔性能的方法。结果表明：自由段注浆对锚索抗拔力有较大幅度的提高，尤其是当界面剪切阶段由弹性向脱黏过渡时，提高比例快速增加，并在脱黏后逐渐趋于稳定。其次，锚索自由段与锚固段交界面处剪切位移和轴力最大，并向两端逐渐降低。随着拉拔力的提高，界面剪切位移和轴力都不断增大，同时向锚索两端的衰减速度也加快。此外，弹性阶段时剪应力曲线为山峰型，而脱黏阶段为马鞍型，并随抗拔力的提高，马鞍开口逐渐扩大。最后，锚固段与自由段长度比Lb /La对锚索极限抗拔力的影响较小，其极限抗拔力折减系数?Q取值介于0.81～0.83之间，且Lb /La =2.5时，?Q计算值仅比实测结果小6.02%，验证了本文方法的可行性。  相似文献   

Analysis of resistance factors for LRFD of soil nail pullout limit state using default FHWA load and resistance models     

Hui Hu 《Marine Georesources & Geotechnology》2020,38(3):332-348

Abstract

Resistance factors for load and resistance factor design (LRFD) of pullout limit state of both permanent and temporary soil nails are calibrated against a wide design space using the current Federal Highway Administration (FHWA) nail load and resistance models. The calculated resistance factors were shown to scatter broadly among design scenarios that differ in wall face batter, soil friction angle, nail ultimate bond strength, and surcharge live load. An important lesson learned from the analysis results is that the current practice of using a single resistance factor for LRFD of nail pullout limit state could not result in uniform reliabilities across different design scenarios. Simple artificial neural network (ANN) models were developed for computation of resistance factors. Design examples demonstrated the ability of the ANN models in providing resistance factors that yield satisfactory and consistent reliabilities in different nail pullout designs.  相似文献   

连续弯箱梁自行车桥地震响应分析          下载免费PDF全文

施有志  林四新  阮建凑  林树枝 《地震工程学报》2020,42(5):1208-1216

为研究厦门市弯箱梁自行车桥的地震响应规律，采用SAP2000有限元软件建立自行车高架桥三维壳体模型，在考虑多遇地震和罕遇地震水准作用及不同加载方向的基础上，分别采用反应谱分析法和时程分析法进行该桥的动力响应分析。结果表明：自行车桥z方向位移分量最大，且z方向分量极值均发生在曲线分叉段；相对剪力而言，桥墩竖向支反力相对较小；E1和E2地震水准响应情况随时间的变化趋势基本一致，桥梁结构未进入塑形状态，抗震性能良好，安全性指标较高；反应谱法计算得到的响应包络值相对3条不同的地震时程结果的峰值大，在实际桥梁抗震分析过程中需要综合考虑两者的分析结果。文章研究结果对今后自行车桥设计和抗震性能分析具有指导意义，并可为研究者对该类桥的进一步研究提供借鉴。  相似文献   

A hydropedological approach to simulate streamflow and soil water contents with SWAT+     

Johan van Tol  Katrin Bieger  Jeffrey G. Arnold 《水文研究》2021,35(6):e14242

Reflecting internal catchment hydrological processes in hydrological models is important for accurate predictions of the impact of climate and land-use change on water resources. Characterizing these processes is however difficult and expensive due to their dynamic nature and spatio-temporal variability. Hydropedology is a relatively new discipline focusing on the synergistic integration of hydrology, soil physics and pedology. Hydropedological interpretations of soils and soil distribution can be used to characterize key hydrological processes, especially in areas with no or limited hydrometric measurements. Here we applied a hydropedological approach to reflect flowpaths through detailed routing in SWAT+ for a 157 ha catchment (Weatherley) in South Africa. We compared the hydropedological approach and a standard (no routing) approach against measured streamflow (two weirs) and soil water contents (13 locations). The catchment was treated as ‘ungauged’ and the model was not calibrated against hydrometric measurements in order to determine the direct contribution of hydropedology on modelling efficiency. Streamflow was predicted well without calibration (NSE > 0.8; R² > 0.82) for both approaches at both weirs. The standard approach yielded slightly better streamflow predictions. The hydropedological approach resulted in considerable improvements in the simulation of soil water contents (R² increased from 0.40 to 0.49 and PBIAS decreased from 40% to 20%). The routing capacity of SWAT+ as employed in the hydropedological approach reduced the underestimation of wetland water regimes drastically and resulted in a more accurate representation of the dominant hydrological processes in this catchment. We concluded that hydropedology can be a valuable source of ‘soft data’ to reflect internal catchment structure and processes and, potentially, for realistic calibrations in other studies, especially those conducted in areas with limited hydrometric measurements.  相似文献