1992年以来盐城滨海湿地植被动态变化研究     

张佳佳  沈永明 《海洋科学》2018,42(8):14-21

基于1992～2016年4个时相的遥感数据, 对盐城滨海川东港至梁垛河口岸段进行景观分类, 分析湿地植被类型及分布, 借助转移矩阵法探究滨海湿地植被的时空演变。结果表明: 茅草、芦苇、碱蓬, 米草为川东港至梁垛河口段主要湿地植被类型。1992～2016年植被总面积减少, 其中茅草几近消失殆尽; 芦苇、碱蓬面积持续缩减; 米草面积大幅增长。1992～2000年植被面积快速缩减, 大面积的茅草碱蓬地被开发为耕地; 2000～2009年养殖塘侵占湿地植被, 规模剧增。2009～2016年, 米草向海方向扩张的同时靠陆侧转变为养殖塘。川东港至梁垛河口的植被演变是自然和人为共同作用的结果。一方面受淤积型海岸影响, 另一方面受政策引导下的各类滩涂开发活动, 及互花米草的引种所带来的快速扩散的影响。本文研究结果为盐城滨海湿地管理与可持续发展提供理论参考。  相似文献   

地方政府土地出让干预对区域工业碳排放影响的对比分析——以中国8大经济区为例     

王博  吴天航  冯淑怡 《地理科学进展》2020,39(9):1436-1446

探讨不同区域地方政府干预对碳排放的影响差异,对于中国推进碳减排战略、协调区域经济社会发展具有重要意义。鉴于此,论文基于地方政府土地出让的视阈,以中国8大经济区为研究对象,有机耦合STIRPAT模型与CKC模型,构建形成STIRPAT拓展模型,并使用2007—2016年中国28个省(市、自治区)的工业面板数据,对比考察8大经济区政府土地出让干预对区域碳排放的影响差异。结果表明:不同经济区的地方政府土地出让干预对区域碳排放的影响存在显著差异。其中,同为CKC“倒N”型的北部沿海、南部沿海、长江中游经济区,其政府土地出让干预对区域碳排放的影响呈现出北部沿海经济区为负、南部沿海经济区为正、长江中游经济区无显著影响的差异效果;同为CKC“倒U”型的东北、西南和西北经济区,其政府土地出让干预对区域碳排放的影响,东北和西南经济区都显著为负,西北经济区未表现出显著影响;同为CKC“U”型的东部沿海和黄河中游经济区,其政府土地出让干预对碳排放也呈现出前者为负、后者为正的相反影响。研究结果可为制定碳减排差别化政策、协调区域可持续发展提供参考。  相似文献   

冀北张麻井铀钼矿床黄铁矿化蚀变岩地球化学迁移特征及与成矿关系亲缘性的讨论          下载免费PDF全文

宋凯  巫建华  郭恒飞  郭国林 《高校地质学报》2019,25(3):352

张麻井铀钼矿床是中国北方最大的与火山岩有关的热液铀矿床，围岩蚀变广泛发育，其中黄铁矿化在该矿床分布虽 较为局限，但是与铀钼成矿关系密切。为了研究黄铁矿化蚀变与铀、钼成矿的亲缘关系，文章对张麻井的黄铁矿化蚀变岩 进行主、微量元素分析，并选择Yb作为不活动组分，使用质量平衡迁移计算方法， 利用Grant公式对其组分迁移进行定量 计算。岩石地球化学特征显示，黄铁矿化蚀变岩的TFeO含量极高，介于11.24%~24.57%之间(平均18.45%)，其中Fe2O3含量 10.78%~25.25% （平均18.64%）、FeO含量1.43%~1.90% （平均1.69%），Fe2O3/FeO比值平均为10.99，有可能受到后期氧 化。黄铁矿化蚀变岩在Isocon图解上等浓度线斜率小于1，表明整体发生了组分的带入，带入的主要组分为大量的TFeO （131倍），成矿元素Mo（884倍）、Pb（11倍）、U（4.9倍）、V（2.8倍）、Ta（0.44倍）、Cu（0.64倍），碱金属Na2O（0.45 倍），以及Cd（424倍）、Bi（13倍） 等；带出的主要组分有碱金属Li（-0.73）、K2O（-0.17），成矿元素Zn（-0.38）、Cr （-0.37），以及Eu（-0.58）、Sc（-0.25） 等。其中SiO2略微减少（-0.03），带入的Mo含量远大于U的含量，据此认为黄铁 矿化与钼成矿关系更为密切。  相似文献   

Talus slope geomorphology investigated at multiple time scales from high-resolution topographic surveys and historical aerial photographs (Sanetsch Pass,Switzerland)     

Hanne Hendrickx  Lars De Sloover  Cornelis Stal  Reynald Delaloye  Jan Nyssen  Amaury Frankl 《地球表面变化过程与地形》2020,45(14):3653-3669

Talus slopes are common places for debris storage in high-mountain environments and form an important step in the alpine sediment cascade. To understand slope instabilities and sediment transfers, detailed investigations of talus slope geomorphology are needed. Therefore, this study presents a detailed analysis of a talus slope on Col du Sanetsch (Swiss Alps), which is investigated at multiple time scales using high-resolution topographic (HRT) surveys and historical aerial photographs. HRT surveys were collected during three consecutive summers (2017–2019), using uncrewed aerial vehicle (UAV) and terrestrial laser scanning (TLS) measurements. To date, very few studies exist that use HRT methods on talus slopes, especially to the extent of our study area (2 km²). Data acquisition from ground control and in situ field observations is challenging on a talus slope due to the steep terrain (30–37°) and high surface roughness. This results in a poor spatial distribution of ground control points (GCPs), causing unwanted deformation of up to 2 m in the gathered UAV-derived HRT data. The co-alignment of UAV imagery from different survey dates improved this deformation significantly, as validated by the TLS data. Sediment transfer is dominated by small-scale but widespread snow push processes. Pre-existing debris flow channels are prone to erosion and redeposition of material within the channel. A debris flow event of high magnitude occurred in the summer of 2019, as a result of several convective thunderstorms. While low-magnitude (<5,000 m³) debris flow events are frequent throughout the historical record with a return period of 10–20 years, this 2019 event exceeded all historical debris flow events since 1946 in both extent and volume. Future climate predictions show an increase of such intense precipitation events in the region, potentially altering the frequency of debris flows in the study area and changing the dominant geomorphic process which are active on such talus slopes. © 2020 John Wiley & Sons, Ltd.  相似文献   

Impacts of confining pressure and safety thickness on water and mud inrush in weathered granite     

Jinquan Liu  Weizhong Chen  Zhiping Deng  Taogen Liu 《Marine Georesources & Geotechnology》2020,38(2):144-153

Abstract

Due to the strong disintegration and water erosion of completely weathered granite, water and mud inrush disasters are apt to take place in this zone during underwater tunnel construction. The pore, compactness, seepage path length, fracture geometries and their interconnections for water and mud transfer are strongly influenced by confining pressure and waterproof-resistant slab safety thickness. In order to inspect the influence, a series of experiments based on a self-designed testing system and non-Darcy testing method were performed. The results indicated that the water and mud inrush evolution increased with the increase of confining pressure and decreased with the increase of safety thickness. In particular, the confining pressure mainly influences the initial evolution stage, and a critical safety thickness to prevent water and mud inrush is obtained. Besides, the non-Darcy testing method results shows that the water and mud inrush evolution affects the influence of non-Darcy flow. For example, while the safety thickness was smaller than the critical value, the evolution was large and unstable and its behavior transferred into nonlinear. In this case, the flow changed to non-Darcy flow.  相似文献   

济南东部大辛河渗漏段地下水示踪试验与分析          下载免费PDF全文

丁冠涛  刘玉仙  曹光明  齐欢 《山东国土资源》2018,34(2)

2013年以来,济南市为正确处理好保泉和市民饮用优质地下水的关系,组织实施了地表水转换地下水补源系列工程,旨在补源保泉的前提下开采地下水。大辛河地表水转地下水工程是其中重要的组成部分,为了查明大辛河渗漏补源后地下水的补给方向、径流速度等,在大辛河主要渗漏段开展了地下水示踪试验。结果显示:地下水渗漏补源后沿渗漏段—龙奥大厦—济南东区供水奥体加压站—贤文小区一线大体自南向北径流,视径流速度约45m/d,越往两侧流速越缓慢,表明大辛河地表水转地下水工程主要对东郊水源地进行补给,对市区四大泉群补给较弱。示踪试验得出的结论,对大辛河地表水转地下水工程运行具有重要指导作用,对后期管理部门合理规划补源、开采布局具有重要的借鉴意义,促进济南保泉和供水的有机统一。  相似文献   

Response of hybrid isolation system during a shake table experiment of a full‐scale isolated building     

Keri L. Ryan  Taichiro Okazaki  Camila B. Coria  Eiji Sato  Tomohiro Sasaki 《地震工程与结构动力学》2018,47(11):2214-2232

A full‐scale 5‐story steel moment frame building was subjected to a series of earthquake excitations using the E‐Defense shake table in August, 2011. For one of the test configurations, the building was seismically isolated by a hybrid system of lead‐rubber bearings and low friction roller bearings known as cross‐linear bearings, and was designed for a very rare 100 000‐year return period earthquake at a Central and Eastern US soil site. The building was subject to 15 trials including sinusoidal input, recorded motions and simulated earthquakes, 2D and 3D input, and a range of intensities including some beyond the design basis level. The experimental program was one of the first system‐level full‐scale validations of seismic isolation and the first known full‐scale experiment of a hybrid isolation system incorporating lead‐rubber and low friction bearings. Stable response of the hybrid isolation system was demonstrated at displacement demands up to 550 mm and shear strain in excess of 200%. Torsional amplifications were within the new factor stipulated by the code provisions. Axial force was observed to transfer from the lead‐rubber bearings to the cross‐linear bearings at large displacements, and the force transfer at large displacements exceeded that predicted by basic calculations. The force transfer occurred primarily because of the flexural rigidity of the base diaphragm and the larger vertical stiffness of the cross‐linear bearings relative to the lead‐rubber bearings.  相似文献   

基于深度残差网络的机载LiDAR点云分类     

赵传  郭海涛  卢俊  余东行  张保明 《测绘学报》2020,49(2):202-213

机载LiDAR点云的分类是利用其进行城市场景三维重建的关键步骤之一。为充分利用现有的图像领域性能较好的深度学习网络模型,提高点云分类精度,并降低训练时间和对训练样本数量的要求,本文提出一种基于深度残差网络的机载LiDAR点云分类方法。首先提取归一化高程、表面变化率、强度和归一化植被指数4种具有较高区分度的点云低层次特征;然后通过设置不同的邻域大小和视角,利用所提出的点云特征图生成策略,得到多尺度和多视角点云特征图;再将点云特征图输入到预训练的深度残差网络,提取多尺度和多视角深层次特征;最后构建并训练神经网络分类器,利用训练的模型对待分类点云进行预测,经后处理得到分类结果。利用ISPRS三维语义标记竞赛的公开标准数据集进行试验,结果表明,本文方法可有效区分建筑物、地面、车辆等8类地物,分类结果的总体精度为87.1%,可为城市场景三维重建提供可靠的信息。  相似文献   

考虑桩间土体抗滑作用的单排抗滑桩受力计算方法          下载免费PDF全文

肖世国 《中国地质灾害与防治学报》2020,31(1):89-94

为了充分考虑桩间距范围内滑体对抗滑桩受力的影响,从单排抗滑桩加固边坡的整体稳定角度出发,在采用传递系数法分析指定设计安全系数情况下抗滑桩的内力时,提出对一个桩间距范围内的加固坡体进行整体分析,将抗滑桩所在部位单独划分条块,该条块包括桩体受荷段及其两侧桩间距范围内的滑体。推导了与此分析模型相应的桩体受荷段底端内力计算公式,并给出了在滑坡推力线性分布条件下作用于受荷段的净滑坡推力计算表达式。分析结果显示,在不考虑与完全考虑受荷段两侧桩间距范围内滑体抗力作用时,得到是桩体内力及位移的上、下边界值。实例分析进一步表明,理论分析与数值模拟结果具有良好的一致性。所提出的方法比传统方法更有利于抗滑桩设计的经济性。  相似文献   

1978年改革开放以来中国工业地理格局演变   总被引：12，自引：4，他引：8  

贺灿飞  胡绪千 《地理学报》2019,74(10):1962-1979

回顾改革开放40年,在深刻的制度变革环境下,中国工业实现快速发展,中国工业地理格局也在经济转型中得到重塑。中国工业总体上经历了从内陆扩散到沿海地区集聚,再向内陆转移的过程。但不同类型产业地理格局及变化受制于不同力量,显现出一定的行业差异性。与改革开放之初相比,中国工业在不同地理尺度上呈现出明显的集聚趋势,但集聚程度较欧盟和美国低。产业的聚集与分散驱动不同尺度下的产业迁移,导致区域产业频繁进入和退出,促使地方产业呈现多样化态势,推动中国工业地理格局演变。从经济转型的视角出发,改革开放可概括为市场化、全球化和分权化三个过程,这些过程创造市场力量,激活地方力量,引入全球力量,共同重塑了中国工业地理格局。  相似文献