The Haicheng earthquake (Ms 7.3) occurred in Liaoning Province (39°N–43°N, 120°E–126°E ), China on February 4, 1975. The mortality rate was only 0.02% owing to the first timely and accurate prediction, although the area affected by the earthquake was 9200 km2 and covered cities with a population density of 1000 p/km2. In this study, the doubledifference (DD) tomography method was used to obtain high-resolution three-dimensional (3D) P- and S-wave velocity (Vp and Vs) structures and Vp/Vs as well as the earthquake locations. Tomography results suggest that velocity structure at shallow depth coincides well with topography and sediment thickness. The earthquake locations form a northwest-striking zone associated with the Jinzhou(JZ) Fault and a northeast-striking zone associated with the Haichenghe-Dayanghe (HD) Fault, and suggest that the JZ Fault consists of three faults and the Ms 7.3 Haicheng earthquake originated at the intersection of the JZ and the Faults. Lowvelocity zones (LVZs) with low Vp/Vs are observed at 15–20 km depth beneath the Haicheng (HC) region. We interpret the LVZs in the middle crust as regions of fluids, suggesting rock dehydration at high temperatures. The LVZs and low Vp/Vs in the upper crust are attributed to groundwater-filled cracks and pores. We believe that large crustal earthquakes in this area are caused by the combination of faulting and fluid movement in the middle crust. 相似文献
It is important to be fully aware of the dynamic characteristics of saturated soft clays under complex loading conditions in practice. In this paper, a series of undrained tests for soft clay consolidated with different initial major principal stress direction ξ were conducted by a hollow cylinder apparatus (HCA). The clay samples were subjected to pure principal stress rotation as the magnitudes of the mean total stress p, intermediate principal stress coefficient b, and deviator stress q were all maintained constant. The influences of intermediate principal stress coefficient and initial major principal stress direction on the variation of strain components, generation of pore water pressure, cyclic degradation and non-coaxiality were investigated. The experimental observations indicated that the strain components of specimen were affected by both intermediate principal stress coefficient and initial major principal stress direction. The generation of the pore water pressure was significantly influenced by intermediate principal stress coefficient. However, the generation of pore water pressure was merely influenced by initial major principal stress direction when b?=?0.5. It was also noted that the torsional stress–strain relationships were affected by the number of cycles, and the effect of intermediate principal stress coefficient and initial major principal stress direction on the torsional stress–strain loops were also significant. Stiffness degradation occur under pure principal stress rotation. Anisotropic behavior resulting from the process of inclined consolidation have considerable effects on the strain components and non-coaxial behavior of soft clay.
AbstractTo achieve the rapid dewatering of dredged sludge, the flocculation–vacuum-preloading method was tested indoors. In this study, the optimal mixing ratio of six flocculants was determined through the settling column test, and then the proposed method was tested. The water drainage and settlement were monitored during the test, while the soil moisture content and shear strength were measured after the test. The results show that all the flocculants had an optimal mixing ratio, and the addition of 0.8% FeCl3 or 0.08% anionic polyacrylamide (APAM) in the sludge can better accelerate solid–liquid separation of the sludge. After the test, the water content in the sludge decreased from 140% to 60%. Compared with general vacuum preloading, the use of the proposed method increased the water drainage by 46.5% and 56.8% and decreased the soil volumes by 60.5% and 82.4% for FeCl3 and APAM, respectively. Moreover, the corresponding shear strength was increased from 10 to 14 and 17?kPa. In addition, the use of APAM increased the solidification rate of heavy metals in the sludge to more than 80%, effectively inhibiting the migration of heavy metals. 相似文献
