中国工业烟粉尘排放时空演化及其影响因素     

郭政  姚士谋  吴常艳 《地理科学》2020,40(12):1949-1957

采用空间分析和空间杜宾模型等方法，研究1999—2017年中国工业烟粉尘排放时空演化特征及其影响因素。结果表明：① 中国工业烟粉尘排放空间分布差异明显，其排放的基尼系数和污染物分布指数均呈现下降态势，空间集中程度有所缓和。② 中国工业烟粉尘排放空间分布呈东北?西南走向，其排放中心不断由东南向西北方向迁移。③ 中国工业烟粉尘排放存在空间相关性和空间溢出效应，其冷热点区空间分布发生显著变化。④ 能源消耗、第二产业比重、人口密度和经济发展水平的提升将会增加工业烟粉尘排放，而外资水平、治理技术水平和环境规制力度的提升则有利于减少工业烟粉尘排放。  相似文献   

三元插层材料的合成及其在聚丙烯老化中的应用          下载免费PDF全文

郭凡  刘志启  王庭胜  李丽娟  李娜 《盐湖研究》2020,28(3)

以FeCl3?6H2O、NiCl2?6H2O、MgCl2?6H2O为原料，以NaOH为沉淀剂采用水热法合成了镁镍铁水滑石 (MgNiFe-LDH)，通过X射线衍射 (XRD)、傅里叶变换红外光谱 (FTIR) 和扫描电镜 (SEM) 分析了MgNiFe-LDH结构及形貌，探讨了不同陈化时间和水热温度对MgNiFe-LDH合成的影响。将制得的MgNiFe-LDH添加至聚丙烯 (PP) 中，制备MgNiFe-LDH/PP复合材料，通过对材料的加速老化测其力学性能，研究了添加MgNiFe-LDH前后材料力学性能的差异。研究结果表明，当Mg2+:Ni2+:Fe3+=2:1:1，反应温度为140℃、陈化时间为24 h时，合成的MgNiFe-LDH为片状，形貌较为规整，颗粒粒径约为2μm；经加速老化后，填充MgNiFe-LDH 复合材料的抗老化性能优于纯PP，当MgNiFe-LDH的填充量为6 wt% 复合材料拉伸强度不变，可明显提高PP的抗老化性能。  相似文献   

地理大数据挖掘——目标、内涵与研究问题     

裴韬  宋辞  郭思慧  舒华  刘亚溪  杜云艳  马廷  周成虎 《地理学报(英文版)》2020,30(2):251-266

  相似文献   

Cryosphere evapotranspiration in the Tibetan Plateau: A review     

KunXin Wang  YinSheng Zhang  Ning Ma  YanHong Guo  YaoHui Qiang 《寒旱区科学》2020,12(6):355-370

Land surface actual evapotranspiration is an important process that influences the Earth's energy and water cycles and determines the water and heat transfer in the soil-vegetation-atmosphere system. Meanwhile, the cryosphere's hydrological process is receiving extensive attention, and its water problem needs to be understood from multiple perspectives. As the main part of the Chinese cryosphere, the Tibetan Plateau faces significant climate and environmental change. There are active interaction and pronounced feedback between the environment and ET_a in the cryosphere. This article mainly focuses on the research progress of ET_a in the Tibetan Plateau. It first reviews the ET_a process, characteristics, and impact factors of typical underlying surfaces in the Tibetan Plateau (alpine meadows, alpine steppes, alpine wetlands, alpine forests, lakes). Then it compares the temporal and spatial variations of ET_a at different scales. In addition, considering the current greening of cryosphere vegetation due to climate change, it discusses the relationship between vegetation greening and transpiration to help clarify how vegetation activities are related to the regional water cycle and surface energy budget.  相似文献   

Structural strength deterioration of coastal bridge piers considering non-uniform corrosion in marine environments     

Anxin Guo  Wenting Yuan  Haitao Li  Hui Li 《地震工程与工程振动(英文版)》2018,17(2):429-444

In the aggressive marine environment over a long-term service period,coastal bridges inevitably sustain corrosion-induced damage due to high sea salt and humidity.This paper investigates the strength reduction of coastal bridges,especially focusing on the effects of non-uniform corrosion along the height of bridge piers.First,the corrosion initiation time and the degradation of reinforcement and concrete are analyzed for bridge piers in marine environments.To investigate the various damage modes of the concrete cover,a discretization method with fiber cells is used for calculating time-dependent interaction diagrams of cross-sections of the bridge piers at the atmospheric zone and the splash and tidal zone under a combination of axial force and bending moment.Second,the shear strength of these aging structures is analyzed.Numerical simulation indicates that the strength of a concrete pier experiences dramatic reduction from corrosion initiation to the spalling of the concrete cover.Strength loss in the splash and tidal zone is more significant than in the atmospheric zone when structures’service time is assumed to be the same.  相似文献   

Acoustic reflection well logging modeling using the frequency-domain finite-element method with a hybrid PML     

Bing Wang  Zhang Kuo  Tao Guo  Liu He  Xiao-Liang Zhang 《应用地球物理》2018,15(1):35-45

In this paper, we propose a hybrid PML (H-PML) combining the normal absorption factor of convolutional PML (C-PML) with tangential absorption factor of Mutiaxial PML (M-PML). The H-PML boundary conditions can better suppress the numerical instability in some extreme models. and the computational speed of finite-element method and the dynamic range are greatly increased using this HPML. We use the finiteelement method with a hybrid PML to model the acoustic reflection of the interface when wireline and well logging while drilling (LWD), in a formation with a reflector outside the borehole. The simulation results suggests that the PS- and SP- reflected waves arrive at the same time when the inclination between the well and the outer interface is zero, and the difference in arrival times increases with increasing dip angle. When there are fractures outside the well, the reflection signal is clearer in the subsequent reflection waves and may be used to identify the fractured zone. The difference between the dominant wavelength and the model scale shows that LWD reflection logging data are of higher resolution and quality than wireline acoustic reflection logging.  相似文献   

Brittleness characteristics of tight oil siltstones     

Wen-Hui Tan  Jing Ba  Meng-Qiu Guo  Hui Li  Lin Zhang  Ting Yu  Hao Chen 《应用地球物理》2018,15(2):175-187

Rock brittleness directly affects reservoir fracturing and its evaluation is essential for establishing fracturing conditions prior to reservoir reforming. Dynamic and static brittleness data were collected from siltstones of the Qingshankou Formation in Songliao Basin. The brittle–plastic transition was investigated based on the stress–strain relation. The results suggest that the brittleness indices calculated by static elastic parameters are negatively correlated with the stress drop coefficient and the brittleness index B₂, defined as the average of the normalized Young’s modulus and Poisson’s ratio, is strongly correlated with the stress drop. The brittleness index B₂, Young’s modulus, and Poisson’s ratio correlate with the brittle minerals content; that is, quartz, carbonates, and pyrite. We also investigated the correlation between pore fluid and porosity and dynamic brittle characteristic based on index B₂. Pore fluid increases the plasticity of rock and reduces brittleness; moreover, with increasing porosity, rock brittleness decreases. The gas-saturated siltstone brittleness index is higher than that in oil- or water-saturated siltstone; the difference in the brittleness indices of oil- and water-saturated siltstone is very small. By comparing the rock mechanics and ultrasonic experiments, we find that the brittleness index obtained from the rock mechanics experiments is smaller than that obtained from the ultrasonic experiments; nevertheless, both decrease with increasing porosity as well as their differences. Ultrasonic waves propagate through the rock specimens without affecting them, whereas rock mechanics experiments are destructive and induce microcracking and porosity increases; consequently, the brittleness of low-porosity rocks is affected by the formation of internal microcrack systems.  相似文献   

How to involve individuals in personal carbon trading? A game model taking into account the heterogeneous emotions of government and individuals     

Guo  Daoyan  Chen  Hong  Long  Ruyin 《Natural Hazards》2019,95(1-2):419-435

Natural Hazards - The implementation of personal carbon trading (PCT) scheme is urgently required in the context of low-carbon development. It is a key issue and a difficult problem for government...  相似文献   

低渗透储层孔隙结构影响因素及其定量评价——以准噶尔盆地金龙2地区二叠系上乌尔禾组二段为例     

单祥  郭华军  郭旭光  邹志文  李亚哲  王力宝 《吉林大学学报(地球科学版)》2019,49(3):637-649

利用薄片、扫描电镜、物性及压汞等资料，对金龙2地区三叠系上乌尔禾组二段（P₃w₂）低渗（含砾）砂岩储层孔隙结构及其影响因素进行了研究。结果表明：①乌二段属于低孔低渗储层，根据压汞曲线参数特征，将其孔隙结构划分为三类。②成岩作用控制了储层孔隙结构，定量计算结果表明，乌二段视压实率平均为53.54%、视胶结率平均为47.53%、视溶蚀率平均为13.84%、视微孔隙率平均为60.67%，表现为中等压实、中-强胶结、弱溶蚀、微孔发育等特征；压实作用、胶结作用、微孔隙发育主要控制储层孔隙结构的形成。③引入成岩综合指数来定量表征各种成岩作用的综合强度，其与储层孔隙结构参数（排驱压力、分选系数）以及储层品质因子（RQI）具有较好的统计相关关系，Ⅰ类储层成岩综合指数大于8%，Ⅱ类储层成岩综合指数为2%~8%，Ⅲ类储层成岩综合指数小于2%。因此，可以利用成岩综合指数定量评价储层孔隙结构。  相似文献   

Influence of initial state and intermediate principal stress on undrained behavior of soft clay during pure principal stress rotation     

Wang  Yuke  Gao  Yufeng  Li  Bing  Guo  Lin  Cai  Yuanqiang  Mahfouz  Ali H. 《Acta Geotechnica》2019,14(5):1379-1401

It is important to be fully aware of the dynamic characteristics of saturated soft clays under complex loading conditions in practice. In this paper, a series of undrained tests for soft clay consolidated with different initial major principal stress direction ξ were conducted by a hollow cylinder apparatus (HCA). The clay samples were subjected to pure principal stress rotation as the magnitudes of the mean total stress p, intermediate principal stress coefficient b, and deviator stress q were all maintained constant. The influences of intermediate principal stress coefficient and initial major principal stress direction on the variation of strain components, generation of pore water pressure, cyclic degradation and non-coaxiality were investigated. The experimental observations indicated that the strain components of specimen were affected by both intermediate principal stress coefficient and initial major principal stress direction. The generation of the pore water pressure was significantly influenced by intermediate principal stress coefficient. However, the generation of pore water pressure was merely influenced by initial major principal stress direction when b?=?0.5. It was also noted that the torsional stress–strain relationships were affected by the number of cycles, and the effect of intermediate principal stress coefficient and initial major principal stress direction on the torsional stress–strain loops were also significant. Stiffness degradation occur under pure principal stress rotation. Anisotropic behavior resulting from the process of inclined consolidation have considerable effects on the strain components and non-coaxial behavior of soft clay.

  相似文献