排序方式： 共有54条查询结果，搜索用时 31 毫秒
1.
Houda El Kerni Hasnaa Chennaoui Aoudjehane David Baratoux Mohammed Aoudjehane Andr Charrire Hassan Ibouh Pierre Rochette Yoann Quesnel Minoru Uehara Thomas Kenkmann Gerwin Wulf Michael Poelchau Van Binh Nguyen Maria Aboulahris Samira Makhoukhi Georges Aumaître Didier Bourls Karim Keddadouche 《Meteoritics & planetary science》2019,54(10):2483-2509
Since the discovery of shatter cones (SCs) near the village of Agoudal (Morocco, Central High Atlas Mountains) in 2013, the absence of one or several associated circular structures led to speculation about the age of the impact event, the number, and the size of the impact crater or craters. Additional constraints on the crater size, age, and erosion rates are obtained here from geological, structural, and geophysical mapping and from cosmogenic nuclide data. Our geological maps of the Agoudal impact site at the scales of 1:30,000 (6 km2) and 1:15,000 (2.25 km2) include all known occurrences of SCs in target rocks, breccias, and vertical to overturned strata. Considering that strata surrounding the impact site are subhorizontal, we argue that disturbed strata are related to the impact event. Three types of breccias have been observed. Two of them (br1‐2 and br2) could be produced by erosion–sedimentation–consolidation processes, with no evidence for impact breccias, while breccia (br1) might be impact related. The most probable center of the structure is estimated at 31°59′13.73?N, 5°30′55.14?W using the concentric deviation method applied to the orientation of strata over the disturbed area. Despite the absence of a morphological expression, the ground magnetic and electromagnetic surveys reveal anomalies spatially associated with disturbed strata and SC occurrences. The geophysical data, the structural observations, and the area of occurrence of SCs in target rocks are all consistent with an original size of 1.4–4.2 km in diameter. Cosmogenic nuclide data (36Cl) constrain the local erosion rates between 220 ± 22 m Ma?1 and 430 ± 43 m Ma?1. These erosion rates may remove the topographic expression of such a crater and its ejecta in a time period of about 0.3–1.9 Ma. This age is older than the Agoudal iron meteorite age (105 ± 40 kyr). This new age constraint excludes the possibility of a genetic relationship between the Agoudal iron meteorite fall and the formation of the Agoudal impact site. A chronolgy chart including the Atlas orogeny, the alternation of sedimentation and erosion periods, and the meteoritic impacts is presented based on all obtained and combined data. 相似文献
2.
Luu Chinh Bui Quynh Duy Costache Romulus Nguyen Luan Thanh Nguyen Thu Thuy Van Phong Tran Van Le Hiep Pham Binh Thai 《Natural Hazards》2021,108(3):3229-3251
Natural Hazards - Vietnam’s central coastal region is the most vulnerable and always at flood risk, severely affecting people’s livelihoods and socio-economic development. In... 相似文献
3.
Nguyen Thi Thanh Binh Tomochika TokunagaNeil R. Goulty Hoang Phuoc SonMai Van Binh 《Marine and Petroleum Geology》2011,28(5):973-979
The results presented in this paper are the first published estimates of the complete stress tensor in the Cuu Long and Nam Con Son basins, offshore Vietnam. We analysed in situ stress and pore pressure fields in the sedimentary formations using data from petroleum exploration and production wells to evaluate the stress state in these basins. The data were obtained from the seafloor to 4300 m burial depth and include both hydrostatic and overpressured sections. Minimum horizontal stresses were obtained from extended leak-off tests and mini-fracture tests. Maximum horizontal stresses were estimated from drilling-induced fracture parameters and borehole breakout widths in twelve wells using rock properties measured in the laboratory or estimated empirically from wireline logs. Seven data points are located in sediments, and seventeen data points in igneous basement rocks at depths greater than 3000 m.The estimated magnitudes of σH are 70-110% of the σv magnitudes. Considering the errors in the stress magnitude estimates, their relative magnitudes suggest that a borderline normal/strike-slip stress regime presently exists in normally pressured sequences of the Nam Con Son and Cuu Long basins. Of the twenty-four data points, twenty have effective stress ratios at a critical stress state for faulting on the assumption that there are faults present that are optimally oriented for failure with friction coefficients of ∼0.5. The results suggest that the stress state in these basins is generally critical. 相似文献
4.
The transient phenomena associated with induced polarization are very complex and it is necessary to have both a proper understanding of the physical processes and a good supply of mathematical aids in order to make any advance in the quantitative interpretation of I.P. surveys. The analogy between the classical electrical sounding method and the induced polarization sounding method has led a number of workers to interpret the results of the latter like the results of the former. To clarify this idea, it seems very interesting to calculate a mathematical model in order to know the form of the anomaly that can be probably expected. The case of a thin horizontal polarizable layer, with the same uniform and isotropic conductibility as the homogeneous background, has been studied in this paper. The result of the calculation for the case of a single current electrode and a single potential electrode is given. From these data, the theoretical curve of IP sounding using the Wenner electrode array is computed. The master curve is compared with experimental curves obtained on scale models. A good correlation between these curves is noticed. In addition, it can be concluded that the mathematical model is proving the validity of the experiments on interpretation scale models. 相似文献
5.
敦煌造山带长山子地区变质演化及年代学研究 总被引：1，自引：1，他引：0
长山子地区位于敦煌造山带东北部,瓜州南部约100km处。该区主要出露一套中-高级变质表壳岩,主要岩石类型有长英质片麻岩、变泥质麻粒岩、高压基性麻粒岩、斜长角闪片麻岩。高压基性麻粒岩岩块、斜长角闪片麻岩岩块以构造透镜体或布丁(长度为0. 5~15m)的形式,被夹持于长英质片麻岩、变泥质麻粒岩组成的基质之中,呈现典型"基质夹岩块"的混杂带特征。高压基性麻粒岩、斜长角闪片麻岩、泥质麻粒岩中,普遍保留了二至三个阶段的变质矿物组合。进变质阶段矿物组合(M1)为石榴子石变斑晶中的细小矿物包裹体,变质高峰期矿物组合(M2)为石榴子石变斑晶和基质矿物,退变质阶段矿物组合(M3)主要为围绕石榴子石变斑晶边部发育的"白眼圈"状后成合晶。本区各类变质岩石均记录了顺时针型变质作用P-T轨迹,系典型俯冲-碰撞造山带变质作用特征。退变质阶段P-T轨迹属于西阿尔卑斯型,说明变质岩折返速率较快。变质高峰期(M2)属于中压变质相系,P-T条件分别为790~870℃/1.29~1.37GPa(高压基性麻粒岩)、680~685℃/0.89~0.97GPa(斜长角闪片麻岩)、860~880℃/0.90~1.14GPa(变泥质麻粒岩),它们之间存在大的差异。这说明,它们是形成于同一俯冲隧道内不同深度的变质岩石,在构造折返阶段才混杂在一起形成构造混杂岩。二次离子质谱(SIMS)锆石U-Pb定年表明,长山子地区变质杂岩记录了早泥盆世的俯冲事件(419~417Ma)。 相似文献
6.
越南西北部大象山超高温变质岩的发现及其区域构造意义 总被引：1，自引：1，他引：0
越南西北部大象山群孔兹岩系中发育一套含刚玉+尖晶石+石榴石+夕线石组合的富铝岩石块体,它们呈透镜状包体形式赋存于孔兹岩系内。岩石中刚玉+尖晶石+石榴石+夕线石组合的发育指示岩石经历了超高温变质作用的改造。其中尖晶石和石英的共生组合表明了变质温度高于900℃,而利用岩石退变质矿物组合中的黑云母-石榴石温度计,黑云母-斜长石-石榴石-石英组合温度-压力计估算的变质温度压力条件分别为879~917℃、0.90~0.94GPa。岩石中的早期刚玉+夕线石的组合的存在说明岩石变质作用已经从高角闪岩相进入到了麻粒岩相;而峰期变质矿物组合尖晶石+石英的出现,指示了变质温度高于900℃的超高温变质作用。另一方面,退变质过程中钛铁矿的发育表明岩石经历了快速抬升降压的过程。变质作用的P-T轨迹分析揭示出岩石经历了早期同步升温增压后的快速增温达到峰期条件,后经历快速等温减压过程。这种温压条件的变化与板块会聚过程中由于俯冲板片的断离而使软流圈上涌造成热异常的温压条件变化基本一致。通过对超高温变质岩石进行锆石SIMS U-Pb测年获得的结果大于58Ma,推测这次超高温变质与喜马拉雅运动中印度与欧亚大陆的初期会聚-碰撞作用相关。 相似文献
7.
This paper deals with an analysis method for the response and motion of soil-like rigid-plastic bodies under seismic loading conditions. A continuity condition to determine the acceleration distribution within the rigid-plastic body when the failure occurs during seismic motions is proposed. Combining this continuity condition of acceleration and the ‘Generalized Limit Equilibrium Method (GLEM)’, the responses of the earth structure during seismic motions as well as the permanent displacements can be obtained, where GLEM is one of the limit equilibrium methods proposed by the authors for static problems and providing the approximate solution for Kötter's equation. The theoretical formulation of the method, the illustrative examples, and some comparisons between the analytical and experimental results are demonstrated. 相似文献
8.
Viet-Ha Nhu Khabat Khosravi James R. Cooper Mahshid Karimi Ozgur Kisi Binh Thai Pham 《水文科学杂志》2020,65(12):2116-2127
ABSTRACT The predictive capability of a new artificial intelligence method, random subspace (RS), for the prediction of suspended sediment load in rivers was compared with commonly used methods: random forest (RF) and two support vector machine (SVM) models using a radial basis function kernel (SVM-RBF) and a normalized polynomial kernel (SVM-NPK). Using river discharge, rainfall and river stage data from the Haraz River, Iran, the results revealed: (a) the RS model provided a superior predictive accuracy (NSE = 0.83) to SVM-RBF (NSE = 0.80), SVM-NPK (NSE = 0.78) and RF (NSE = 0.68), corresponding to very good, good, satisfactory and unsatisfactory accuracies in load prediction; (b) the RBF kernel outperformed the NPK kernel; (c) the predictive capability was most sensitive to gamma and epsilon in SVM models, maximum depth of a tree and the number of features in RF models, classifier type, number of trees and subspace size in RS models; and (d) suspended sediment loads were most closely correlated with river discharge (PCC = 0.76). Overall, the results show that RS models have great potential in data poor watersheds, such as that studied here, to produce strong predictions of suspended load based on monthly records of river discharge, rainfall depth and river stage alone. 相似文献
9.
The magneto-telluric and telluric-telluric profiling techniques are presented, and then a new method which combines these two techniques for mapping a parameter defined as the “apparent pseudo-resistivity”. The results obtained for the uranium structures in the Cluff Lake district (Saskatchewan Canada) indicate the use of these different techniques in the detection of zones of conduction for surface zones and for deeper zones, and demonstrate the advantages of these methods over the usual electrical methods in problems of structural research. 相似文献
10.
After a brief discussion of MT modeling methods, we expose a particular application of finite elements that may be assimilated to a finite-difference method. The resulting linear equations obtained are similar to the transmission network equations for two-dimensional media. The introduction of resistivity discontinuities is more rigorous than in the usual finite-difference development. The consequence is an improved accuracy. We also present some conclusions about various problems encountered in modeling, such as the choice of network boundary conditions, linear system resolution and the final derivation of apparent resistivity. Application of successive over-relaxation is discussed and we detail rules for mesh design that control result accuracy and iterative convergence. 相似文献