排序方式： 共有61条查询结果，搜索用时 15 毫秒
1.
The petrogenesis and tectonic evolution of the Mesozoic ophiolitic mélanges in the western section of the Yarlung Zangbo suture zone (YZSZ) remain controversial. In this paper, we present the results of whole-rock geochemical and SrNd isotope analyses, zircon UPb ages and in situ LuHf isotopic data obtained from mafic rocks of the northern and southern sub-belts of the western YZSZ Mesozoic ophiolitic mélanges to help us understand these controversial issues. Diabases and dolerites from the northern sub-belt and gabbros from the southern sub-belt exhibit variable fore-arc basalt (FAB)-like geochemical compositions and have zircon UPb ages of ∼126.4–120.3 Ma. In addition, gabbro-diabases from the northern sub-belt have boninite series affinities and yield a zircon UPb age of ∼125.7 Ma. These results, along with previous studies on the YZSZ Mesozoic ophiolitic mélanges and the Gangdese arc, reveal that the western YZSZ Mesozoic ophiolites were likely generated over multiple stages in the epicontinental Gangdese fore-arc basin as the Yarlung Zangbo Neo-Tethyan Ocean subducted northward in front of the Lhasa terrane. The Early Cretaceous FAB-like and boninite series mafic rocks were formed by the reinitiation of subduction, which was followed by a retreat of the subduction zone and the creation of the fore-arc basin and strong hyperextension, accompanied by asthenosphere upwelling at ∼130–120 Ma. During this process, the upwelling asthenosphere underwent decompressional melting with limited penetration of slab-derived fluids and gave rise to the N-MORB (normal mid-ocean ridge basalt)-like basaltic magmas that intruded the overlying, previously generated depleted mantle as FAB-like gabbro, diabase and dolerite sills or dykes. Then, boninitic magmas represented by boninitic gabbro-diabases were generated by remelting the extremely depleted residual mantle source, which was metasomatized by a small amount of slab-derived fluids, following previous extractions of FAB-like magma. 相似文献
2.
鄂西地区五峰组-龙马溪组已成为中国南方页岩气勘探的热点领域。为深化该区页岩储层及含气性特征认识,本文以鄂宜页2井钻井及测试分析资料为基础,以笔石带为标尺,对五峰组-龙马溪组下部黑色富有机质页岩的岩石学特征、有机地化特征、储集空间类型及结构特征进行深入研究,分析总结了页岩储层含气性特征及影响因素,并对页岩储层开展了综合评价。结果表明：鄂宜页2井五峰组-龙马溪组下部黑色岩系缺失LM5-LM6笔石带,富有机质页岩上延至LM7笔石带,总厚度约16 m;岩性以硅质页岩夹少量硅质岩、混合质页岩和黏土质页岩为主,有机质类型为Ⅰ-Ⅱ1型,Ro为1.88%~2.03%,显示黑色页岩已过大量生气阶段;页岩储集空间主要为小于100 nm的有机质纳米孔、直径大于5 μm的微米孔和构造微裂缝,其中纳米孔占比超过50%,孔隙容积、比表面积与有机碳含量存在显著正相关性;现场解析总含气量为0.068~3.33 m3/t,平均1.13 m3/t,高含气量段集中于凯迪阶WF2-WF3与鲁丹阶LM2-LM4,含气量与TOC、脆性矿物含量之间具有明显的正相关性;根据TOC、含气性、脆性矿物含量以及页岩沉积环境等参数进行综合评价,Ⅰ类储层主要对应于凯迪阶WF2-WF3笔石带以及鲁丹阶LM2-LM4笔石带以深水环境下形成的硅质页岩和硅质岩层段,总厚度约9 m,是该区五峰-龙马溪组水平钻井的最佳甜点段。 相似文献
3.
赣东北朱溪铜钨矿区花岗闪长斑岩LA-ICP-MS锆石U-Pb定年及地质意义 总被引：6，自引：0，他引：6
赣东北朱溪超大型铜钨矿位于江南古岛弧带塔前—赋春成矿带中段,该矿床的发现可进一步验证"南钨北扩"观点并对"南钨北铜"格局提出挑战,但前人对与朱溪铜钨矿成矿作用有关的花岗岩缺少精确的年代学研究,导致对其地球动力学背景理解不够深入。本研究通过详细的野外调查、岩心编录和岩矿鉴定,并利用激光剥蚀电感耦合等离子体质谱(LA-ICP-MS)锆石U-Pb法对朱溪铜钨矿区侵入元古代双桥山岩群中的铜矿化花岗闪长斑岩进行测年,获得了锆石206Pb/238U加权平均年龄为847.2±9.4 Ma(MSWD=0.111),代表了其侵位结晶的年龄,属新元古代。分析认为:朱溪铜钨矿区铜矿化花岗闪长斑岩是新元古代早期华南古洋壳俯冲消减及扬子陆块与华夏陆块发生碰撞作用下的岩浆产物,这次岩浆活动与区域上塔前—赋春成矿带成矿作用关系密切,并为钦—杭成矿带提供了成矿物质基础。本次对其成岩年龄的限定,为研究朱溪超大型铜钨矿矿床提供了新证据。 相似文献
4.
Most rare-metal granites in South China host major W deposits with few or without Ta–Nb mineralization. However, the Yashan granitic pluton, located in the Yichun area of western Jiangxi province, South China, hosts a major Nb–Ta deposit with minor W mineralization. It is thus important for understanding the diversity of W and Nb–Ta mineralization associated with rare-metal granites. The Yashan pluton consists of multi-stage intrusive units, including the protolithionite (-muscovite) granite, Li-mica granite and topaz–lepidolite granite from the early to late stages. Bulk-rock REE contents and La/Yb ratios decrease from protolithionite granite to Li-mica granite to topaz–lepidolite granite, suggesting the dominant plagioclase fractionation. This variation, together with increasing Li, Rb, Cs and Ta but decreasing Nb/Ta and Zr/Hf ratios, is consistent with the magmatic evolution. In the Yashan pluton, micas are protolithionite, muscovite, Li-mica and lepidolite, and zircons show wide concentration ranges of ZrO2, HfO2, UO2, ThO2, Y2O3 and P2O5. Compositional variations of minerals, such as increasing F, Rb and Li in mica and increasing Hf, U and P in zircon are also in concert with the magmatic evolution from protolithionite granite to Li-mica granite to topaz–lepidolite granite. The most evolved topaz–lepidolite granite has the highest bulk-rock Li, Rb, Cs, F and P contents, consistent with the highest contents of these elements and the lowest Nb/Ta ratio in mica and the lowest Zr/Hf ratio in zircon. Ta–Nb enrichment was closely related to the enrichment of volatile elements (i.e. Li, F and P) in the melt during magmatic evolution, which raised the proportion of non-bridging oxygens (NBOs) in the melt. The rims of zoned micas in the Li-mica and topaz–lepidolite granites contain lower Rb, Cs, Nb and Ta and much lower F and W than the cores and/or mantles, indicating an exotic aqueous fluid during hydrothermal evolution. Some columbite-group minerals may have formed from exotic aqueous fluids which were originally depleted in F, Rb, Cs, Nb, Ta and W, but such fluids were not responsible for Ta–Nb enrichment in the Yashan granite. The interaction of hydrothermal fluids with previously existing micas may have played an important role in leaching, concentrating and transporting W, Fe and Ti. Ta–Nb enrichment was associated with highly evolved magmas, but W mineralization is closely related to hydrothermal fluid. Thus these magmatic and hydrothermal processes explain the diversity of W and Ta–Nb mineralizations in the rare-metal granites. 相似文献
5.
The recently discovered Zhuxi W–Cu ore deposit is located within the Taqian–Fuchun Ore Belt in the southeastern edge of the Yangtze Block, South China. Its inferred tungsten resources, based on new exploration data, are more than 280 Mt by 2016. At least three paragenetic stages of skarn formation and ore deposition have been recognized: prograde skarn stage; retrograde stage; and hydrothermal sulfide stage. Secondly, greisenization, marmorization and hornfels formation are also observed. Scheelite and chalcopyrite are the dominant metal minerals in the Zhuxi deposit and their formation was associated with the emplacement of granite stocks and porphyry dykes intruded into the surrounding Carboniferous carbonate sediments (Huanglong and Chuanshan formations) and the Neoproterozoic slate and phyllites. The scheelite was mostly precipitated during the retrograde stage, whereas the chalcopyrite was widely precipitated during the hydrothermal sulfide stage. A muscovite 40Ar/39Ar plateau age of about 150 Ma is interpreted as the time of tungsten mineralization and molybdenite Re–Os model ages ranging from 145.9 ± 2.0 Ma to 148.7 ± 2.2 Ma (for the subsequent hydrothermal sulfide stage of activity) as the time of the copper mineralization. Our new molybdenite Re–Os and muscovite 40Ar/39Ar dating results, along with previous zircon U–Pb age data, indicate that the hydrothermal activity from the retrograde stage to the last hydrothermal sulfide stage lasted up to 5 Myr, from 150.6 ± 1.5 to 145.9 ± 1 Ma, and is approximately coeval or slightly later than the emplacement of the associated granite porphyry and biotite granite. The new ages reported here confirm that the Zhuxi tungsten deposit represents one of the Mesozoic magmatic–hydrothermal mineralization events that took place in South China in a setting of lithospheric extension during the Late Jurassic (160–150 Ma). It is suggested that mantle material played a role in producing the Zhuxi W–Cu mineralization and associated magmatism. 相似文献
6.
Vp/Vs Anisotropy and Implications for Crustal Composition Identification and Earthquake Prediction 总被引：1，自引：1，他引：0
Abstract: The ratio of P- to S-wave velocities (Vp/Vs) is regarded as one of the most diagnostic properties of natural rocks. It has been used as a discriminant of composition for the continental crust and provides valuable constraints on its formation and evolution processes. Furthermore, the spatial and temporal changes in Vp/Vs before and after earthquakes are probably the most promising avenue to understanding the source mechanics and possibly predicting earthquakes. Here we calibrate the variations in Vp/Vs in dry, anisotropic crustal rocks and provide a set of basic information for the interpretation of future seismic data from the Wenchuan earthquake Fault zone Scientific Drilling (WFSD) project and other surveys. Vp/Vs is a constant (Ф0) for an isotropic rock. However, most of crustal rocks are anisotropic due to lattice-preferred orientations of anisotropic minerals (e.g., mica, amphibole, plagioclase and pyroxene) and cracks as well as thin compositional layering. The Vp/Vs ratio of an anisotropic rock measured along a selected pair of propagation-vibration directions is an apparent value (Фij) that is significantly different from the value for its isotropic counterpart (Ф0). The usefulness of apparent Vp/Vs ratios as a diagnostic of crustal composition depends largely on rock seismic anisotropy. A 5% of P- and S-wave velocity anisotropy is sufficient to make it impossible to determine the crustal composition using the conventional criteria (Vp/Vs≤1.756 for felsic rocks, 1.7561.944 fluid-filled porous/fractured or partially molten rocks) if the information about the wave propagation-polarization directions with respect to the tectonic framework is unknown. However, the variations in Vp/Vs measured from borehole seismic experiments can be readily interpreted according to the orientations of the ray path and the polarization of the shear waves with respect to the present-day principal stress directions (i.e., the orientation of cracks) and the frozen fabric (i.e., foliation and lineation). 相似文献
7.
The Carris orebody consists of two partially exploited W–Mo–Sn quartz veins formed during successive shear stages and multipulse fluid fillings. They cut the Variscan post-D3 Gerês I-type granite. The most important ore minerals are wolframite, scheelite, molybdenite and cassiterite. There are two generations of wolframite. The earlier generation of wolframite is rare and has the highest WO4Mn content (91 mol%) and the most common wolframite contains 26–57 mol% WO4Mn. Re–Os dating of molybdenite from the ore quartz veins and surrounding granite yields ages of 279 ± 1.2 Ma and 280.3 ± 1.2 Ma, respectively which are in very good agreement with the previous ID-TIMS U–Pb zircon age for the Carris granite (280 ± 5 Ma).3He/4He ratio of pyrite ranging between 0.73 and 2.71 Ra (1 Ra = 1.39 × 10− 6) and high 3He/36Ar (0.8–5 × 10− 3) indicate a mixture of a crustal radiogenic helium fluid with a mantle derived-fluid.The fluid inclusion studies on quartz intergrown with wolframite and scheelite, beryl and fluorite reveal that two distinct fluid types were involved in the genesis of this deposit. The first was a low to medium salinity aqueous carbonic fluid (CO2 between 4 and 14 mol%) with less than 1.95 mol% N2, which was only found in quartz associated with wolframite. The other was a low salinity aqueous fluid found in all the four minerals. The homogenization temperatures indicate minimum entrapment temperatures of 226–310 °C (average 280 °C) for the H2O–CO2–N2–NaCl fluid and average temperatures of 266 °C for scheelite and 242 °C, 190 °C and 160 °C for the last generations of beryl, fluorite and quartz, respectively. It was estimated that wolframite was deposited ~ 7 km depth, assuming a lithostatic pressure, probably due to strong pressure fluctuation caused by seismic events triggered by brittle tectonics during the exhumation event. Precipitation of scheelite and sulphides took place later, at the same depth, but under a hydrostatic or suprahydrostatic pressure regime, and probably caused by mixing between the magmatic–hydrothermal fluid and meteoric waters that deeply penetrated the basement during post-Variscan decompression. 相似文献
8.
利用GTOPO30和SRTM3数字高程(DEM)数据,提取了喜马拉雅山脉(造山带)的数字高程模型并对其进行了地质地貌的初步分析。从SRTM3数字高程数据提取出坡度数据,初步分析了喜马拉雅山脉坡度和高程的特征。数字高程和坡度图清楚地展现了喜马拉雅大型断裂带(构造边界)的空间分布特征。分析了中国气象局下属的西藏、青海、四川和云南4省区气象观测台站55年来的年平均降水量观测数据、喜马拉雅山脉南坡的年平均降水量数据、喜马拉雅DEM和裂变径迹数据,发现喜马拉雅山脉从东至西,年平均降水量逐渐减少,地形起伏逐渐变小,而高程渐次升高,与此同时剥蚀速率降低;从北至南,年平均降水量逐渐增加,地形起伏增大,高程快速降低,而剥蚀速率则急剧升高。这充分说明了喜马拉雅年平均降水量大的地区,地表剥蚀作用相对较强,年平均降水量小的地区,地表剥蚀作用则较弱,即:在喜马拉雅地区,长周期的地表剥蚀过程(可长达数个百万年时间尺度)和短周期(仅仅50年)的降水量观测是耦合的。 相似文献
9.
《Earth and Planetary Science Letters》2007,253(1-2):37-49
The accuracy of global eustatic sea level curves measured from raised Quaternary reefs, using radiometric ages of corals at known heights, may be limited by time-averaging, which affects the variation in coral age at a given height. Time-averaging was assessed in uplifted Holocene reef sequences from the Huon Peninsula, Papua New Guinea, using radiocarbon dating of coral skeletons in both horizontal transects and vertical sequences. Calibrated 2σ age ranges varied from 800 to 1060 years along horizontal transects, but weighted mean ages calculated from 15–18 dates per horizon were accurate to a resolution within 154–214 yr. Approximately 40% of the variability in age estimate resulted from internal variability inherent to 14C estimates, and 60% was due to time-averaging. The accuracy of age estimates of sea level change in studies using single dated corals as proxies for sea level is probably within 1000 yr of actual age, but can be resolved to ≤ 250 yr if supported by dates from analysis of a statistical population of corals at each stratigraphic interval. The range of time-averaging among reef corals was much less than that for shelly benthos. Ecological time-averaging dominated over sedimentological time averaging for reef corals, opposite to patterns reported from shelly benthos in siliciclastic environments. 相似文献
10.