Response of a scale-model pile group for a jacket foundation of an offshore wind turbine in liquefiable ground during shaking table tests     

Yung-Yen Ko  Yi-Ting Li 《地震工程与结构动力学》2020,49(15):1682-1701

To investigate the seismic response of a pile group during liquefaction, shaking table tests on a 1/25 scale model of a 2 × 2 pile group were conducted, which were pilot tests of a test project of a scale-model offshore wind turbine with jacket foundation. A large laminar shear box was utilized as the soil container to prepare a liquefiable sandy ground specimen. The pile group model comprising four slender aluminum piles with their pile heads connected by a rigid frame was designed with similitude considerations focusing on soil–pile interaction. The input motions were 2-Hz sinusoids with various acceleration amplitudes. The excess pore water pressure generation indicated that the upper half of the ground specimen reached initial liquefaction under the 50-gal-amplitude excitation, whereas in the 75-gal-amplitude test, almost entire ground was liquefied. Accelerations in soil, on the movable frames composing the laminar boundary of the shear box, and along the pile showed limited difference at the same elevation before liquefaction. After liquefaction, the soil and the movable-frame accelerations that represented the ground response considerably reduced, whereas both the movable frames and the piles exhibited high-frequency jitters other than 2-Hz sinusoid, and meantime, remarkable phase difference between the responses of the pile group and the ground was observed, all probably due to the substantial degradation of liquefied soil. Axial strains along the pile implied its double-curvature bending behavior, and the accordingly calculated moment declined significantly after liquefaction. These observations demonstrated the interaction between soil and piles during liquefaction.  相似文献   

Coastal ridge constructive processes at a multi-decadal scale in Barreta Island (southern Portugal)     

Xabier Herrero  Susana Costas  Katerina Kombiadou 《地球表面变化过程与地形》2020,45(2):411-423

Multiple ridges across prograding coasts may display variable geometries, commonly expressed through varying elevations. Changes in ridge elevation have been traditionally related to the occurrence of fluctuating progradation rates, which might, in turn, be driven by shifting environmental conditions. Here, we explore the geometry and growth mechanisms of multiple ridges, generated at Barreta Island (Ria Formosa, southern Portugal), as a consequence of the rapid progradation of the island over the last 70 years, following the artificial fixation of the downdrift Faro-Olhão inlet with jetties in 1955. The variability in the morphology of these features was analysed in combination with available wind and wave data, in order to better distinguish growth mechanisms and understand the main parameters determining the final geometry of the observed ridges. The results suggest that (1) most of the identified ridges fall in the beach ridge classification, as they have been mostly built by marine processes, and (2) the parameters derived from, or closely related to wave climate variability (e.g. progradation rates, storm occurrence) can jointly explain most of the observed morphological changes, while aeolian processes played a secondary role. Indeed, ridge geometry appears mainly controlled by progradation rates, with higher ridges associated with lower progradation rates. Progradation rate, in turn, is mostly related to longshore wave power, storminess, and the occurrence storm groups. Yet, the final configuration of ridges can also be affected by runup levels and onshore winds. Therefore, establishing the relation between ridge geometry and wave climate is not a straightforward task, because of the complex processes and interactions that control coastal morphodynamics. © 2019 John Wiley & Sons, Ltd.  相似文献   

Identification of factors influencing hydrologic model performance using a top-down approach in a large number of U.S. catchments     

Carolina Massmann 《水文研究》2020,34(1):4-20

Investigating the performance that can be achieved with different hydrological models across catchments with varying characteristics is a requirement for identifying an adequate model for any catchment, gauged or ungauged, just based on information about its climate and catchment properties. As parameter uncertainty increases with the number of model parameters, it is important not only to identify a model achieving good results but also to aim at the simplest model still able to provide acceptable results. The main objective of this study is to identify the climate and catchment properties determining the minimal required complexity of a hydrological model. As previous studies indicate that the required model complexity varies with the temporal scale, the study considers the performance at the daily, monthly, and annual timescales. In agreement with previous studies, the results show that catchments located in arid areas tend to be more difficult to model. They therefore require more complex models for achieving an acceptable performance. For determining which other factors influence model performance, an analysis was carried out for four catchment groups (snowy, arid, and eastern and western catchments). The results show that the baseflow and aridity indices are the most consistent predictors of model performance across catchment groups and timescales. Both properties are negatively correlated with model performance. Other relevant predictors are the fraction of snow in the annual precipitation (negative correlation with model performance), soil depth (negative correlation with model performance), and some other soil properties. It was observed that the sign of the correlation between the catchment characteristics and model performance varies between clusters in some cases, stressing the difficulties encountered in large sample analyses. Regarding the impact of the timescale, the study confirmed previous results indicating that more complex models are needed for shorter timescales.  相似文献   

双层打包带加固窗间墙抗震性能试验研究          下载免费PDF全文

王赟 《世界地震工程》2020,(1):183-188

地震时砌体结构窗间墙易发生破坏，为了提高其抗震性能，对高宽比为1的2组共4片墙体，其中:2片为双层打包带加固墙体，2片为原墙，进行了拟静力试验，研究墙体的破坏形态、水平承载力、滞回曲线和耗能等抗震性能。试验发现原墙发生剪切破坏，加固后墙体发生摇摆破坏，加固改变了墙体破坏模式，加固后墙体滞回曲线饱满但有捏笼，破坏荷载、延性和耗能能力都有提高，破坏时未发生剥离，表明双层打包带加固法有效地提高了窗间墙体抗震性能，对承受较大竖向应力墙体效果更好，建议加固时要加强加固层与窗下和窗上墙体的连接。  相似文献   

金伯利岩型金刚石矿床研究及其成矿模式探讨——以辽宁瓦房店地区金刚石原生矿矿床为例     

刘礼广  吴大天  韩双  万方来  林少全  杨献忠 《地质学报》2020,94(9):2650-2665

辽宁南部瓦房店金刚石矿是国内最大的金刚石矿产区，现已发现4处金刚石成矿带、120个岩体。其中金伯利岩岩管24个、岩脉89个、可疑岩体7个，累计提交1221万克拉储量，占全国金刚石储量52%。本文主要对该矿床的金刚石母岩—金伯利岩的岩石地球化学特征进行了全面系统分析，发现金伯利岩中MgO、NiO、Cr 2O 3的含量与TiO 2、Al 2O 3、Na 2O、K 2O、CaO、P 2O 5等偏碱性组分呈正相关关系；Ni、Cr、Co含量与金刚石含量呈正相关，而Ti、Zr、Ba元素含量与金刚石含量呈负相关。通过对瓦房店矿区金刚石中石榴石及单斜辉石包裹体、橄榄石- 石榴石矿物对、石榴石微量元素、尖晶石- 橄榄石等多种地质温、压计归纳得出金刚石矿的来源深度为150~210 km,压力5~7 GPa，温度1083~1261℃，在上述温、压条件下，结合岩浆化学组成，估算金伯利岩具有低氧逸度(fO 2=2. 913×1. 01325×10-6Pa)的特点。结合野外勘查工作，总结了该矿床的地质特征、控矿构造、矿体空间分布规律等要素，认为NEE向和NE向断裂控制着金伯利岩体的展布方向和矿体形态。脉状金伯利岩体一般呈NEE 70°~80°方向展布，严格受NEE至近EW向的密集节理或裂隙控制。提出了金刚石母岩—金伯利岩是由源于上地幔岩浆，在一定的封闭条件下，受构造与岩性双重控制，多期性的爆发与侵入交替作用所形成，并建立了具有较高氧逸度和较高密度的流变性软流圈，通过渗滤熔体浸蚀岩石圈形成金刚石的理想成因模式，希望为下一步找矿工作提供参考。  相似文献   

鄂尔多斯盆地西南部三叠纪末抬升剥蚀事件及热年代学记录   总被引：1，自引：1，他引：0  

王建强  刘池洋  赵红格  张东东  ZATTIN Massimiliano  彭恒 《岩石学报》2020,36(4):1199-1212

三叠纪末期大型鄂尔多斯盆地遭受了中生代成盆以来首次较大规模的抬升剥蚀,显著改造了中晚三叠世延长期盆地面貌,并控制了侏罗纪早期沉积格局和油藏分布,对盆地演化及矿产资源分布产生了重要影响。本文利用地质及大量钻井资料揭示了该期构造事件对盆地的剥蚀改造特征,盆地及周邻地区磷灰石裂变径迹年代学记录并约束了此次构造抬升的时限与过程;综合周邻区域构造研究成果,探讨了其发育的动力学背景。结果表明,鄂尔多斯盆地三叠纪末期的剥蚀具西南强、东北弱的特点,西南部大范围内延长组地层残缺不全,剥蚀量最大可达1000余米;前侏罗纪沉积古地貌总体呈西南高、北东低的特点;其抬升时间始于205～190Ma,西南部稍早于盆地腹部,抬升速率大于1℃/Myr,可持续至中侏罗世(约160Ma)。该期抬升剥蚀事件范围可涉及至盆地西南缘更广阔的区域,与同期秦岭造山带内出现的快速抬升冷却事件具有较好的时空耦合关系,是对秦岭造山带区域构造环境转变的响应和纪录。该研究丰富和发展了三叠纪末期构造事件在华北克拉通的影响,对该区油气、煤炭资源的进一步勘探和评价提供了新的思路,具有一定的现实意义。  相似文献   

北山造山带中部(甘肃段)花岗岩成因及构造背景   总被引：2，自引：2，他引：0  

白荣龙  刘显凡  周慧玲 《岩石学报》2020,36(6):1731-1754

北山造山带中部花岗岩体以陶勒努图洪岩体和跃进山南岩体为代表,本文对这两个岩体进行了LA-ICP-MS锆石U-Pb定年、全岩地球化学和原位锆石Lu-Hf同位素分析,结果表明:岩体成岩年龄分别为410±2. 8Ma、427±2. 5Ma;主量元素呈现高硅、高钾钙碱性、准铝质-弱过铝质特征;微量元素表现为富集Th、Zr、Hf等及大离子亲石元素(Rb、U、K等),亏损Ba、Sr、Eu及高场强元素(Nb、Ta、P、Ti等);球粒陨石标准化稀土元素曲线呈轻稀土富集、重稀土亏损的右倾模式。综合分析认为跃进山南岩体属A型花岗岩,陶勒努图洪岩体属S型花岗岩。陶勒努图洪和跃进山岩体锆石ε_(Hf)(t)分别为-2. 90～-0. 12(平均值为-1. 53)、-1. 99～2. 82(平均值为0. 26),t_(DM2)分别为1. 41～1. 58Ga、1. 23～1. 54Ga。研究表明:陶勒努图洪黑云母花岗闪长岩岩浆源区主要为由元古界北山杂岩组成的以变质杂砂岩为主的古老地壳物质(含中基性岩石)部分熔融的产物,跃进山南二长花岗岩体可能在元古界北山杂岩组成的以变质杂砂岩为主的古老地壳物质重熔过程中有幔源岩浆的参与。在中志留世(427Ma)明水-小黄山洋已向南侧马鬃山-公婆泉弧之下俯冲至后期,板块后撤引发明水-旱山地体南缘弧后形成裂解环境导致幔源岩浆底侵,诱发地壳物质重熔形成花岗质岩浆,岩浆侵位形成跃进山南二长花岗岩体;至早泥盆世(410Ma),俯冲结束发生弧-陆碰撞造山导致地壳增厚,引发下地壳发生部分熔融产生的花岗质岩浆侵位形成陶勒努图洪岩体;两岩体是在早、晚古生代交接时段同一俯冲-碰撞构造背景下不同部位、不同亚构造环境下的产物。  相似文献   

准噶尔盆地乌夏前陆冲断带沉降史与沉积响应研究     

冯建伟  戴俊生  秦峰  宋永 《地质学报》2019,93(11):2729-2741

针对前陆冲断带的特殊构造位置及沉积特征的复杂性,本文在地层剥蚀厚度恢复和层序划分的基础上,通过对准噶尔盆地西缘乌夏前陆冲断带沉降史分析,在海西运动晚期准噶尔地块与西伯利亚板块发生碰撞挤压,形成一系列冲断推覆构造,前缘岩石圈挠曲下陷发育周缘前陆盆地,并夹杂大规模的短暂伸展火山喷发活动,接受了巨厚的二叠系沉积层序;随着板块俯冲在二叠纪末的逐渐消亡,三叠纪进入印支期陆内坳陷继承性挤压活动阶段,周边受南北向挤压和左旋构造应力场影响,前陆冲断带古断裂再次逆冲,哈拉阿拉特山急剧抬升,后缘和什托洛盖盆地形成;进入侏罗纪—白垩纪(燕山运动早中期),为陆内坳陷的填充消亡阶段,但有继承性活动,构造活动强度较二叠纪大为减弱,在燕山运动Ⅲ幕晚期最终被覆盖定型。整个过程受地体碰撞和板内挤压影响,冲断带发生幕式构造活动,从而导致盆地沉降也发生幕式变化,而且冲断带每次挤压逆冲均导致相应的沉降和沉积物充填,并直接控制前陆盆地和陆内坳陷的沉积充填特征。  相似文献   

东天山觉罗塔格带东段早志留世中酸性侵入岩的年代学、地球化学及构造意义     

于介禄  于介江  杨万志  张元厚  郭秀玮 《吉林大学学报(地球科学版)》2019,49(3):690-708

为了确定东天山觉罗塔格带东段玉海地区中酸性侵入岩的形成时代、源区性质及其构造属性，本文对该区中酸性侵入岩进行了系统的LA-ICP-MS锆石U-Pb定年、全岩地球化学以及Sr-Nd同位素分析。2个样品中的锆石在CL图像上具明显振荡环带，Th/U值为0.28~0.59，指示其岩浆成因。对岩浆锆石定年结果表明，它们主要形成于早志留世（433.2~431.2 Ma），代表了寄主岩石的形成时代。样品w（SiO₂）=57.88%~69.01%，w（Na₂O）=3.46%~5.07%，w（K₂O）=0.50%~1.65%，Na₂O/K₂O=4.26~6.79，Mg^#=45.1~52.3，A/CNK=0.89~1.00；稀土配分模式呈右倾型，LREE/HREE=5.55~11.47，（La/Yb）_N=4.18~13.54，δEu=0.82~1.25；在微量元素蛛网图上表现为大离子亲石元素（Ba、U、K、Sr等）相对富集和高场强元素（Th、Ti、Nb、Ta）相对亏损；全岩ε_Nd（t）值介于6.1~7.0之间。研究表明，早志留世中酸性侵入岩的岩浆源区主要为年轻地壳物质，结合火成岩的组合特征、岩浆作用性质以及区域构造演化历史，认为早志留世中酸性侵入岩形成于康古尔洋板片向北（吐-哈地块）俯冲的活动大陆边缘环境，从而将康古尔大洋板片北向俯冲的时限追溯至早志留世。  相似文献   

Hydrodynamic performance of a T-shaped floating breakwater     

《Applied Ocean Research》2019

The comprehensive utilization of floating breakwaters, specially acting as a supporting structure for offshore marine renewable energy explorations, has received more and more attention recently. Based on linear water-wave theory, the hydrodynamic performance of a T-shaped floating breakwater is semi-analytically investigated through the matched eigenfunction expansion method (MEEM). Auxiliary functions, to speed up the convergence and improve the accuracy in the numerical computations, are introduced to represent the singular behavior of fluid field near the lower salient corners of the structure. The effects of the height and installation position of the vertical screen on the reflection and transmission coefficients, dynamic response and wave forces are examined. It is found that the presence of the screen shifts the resonance frequency of RAO for both surge and pitch modes to the low-frequency area, while has no effect on heave mode. The identical added masses, damping and transmission coefficients can be obtained in the cases where the screen holds the same distance away from the longitudinal central axis of the upper box-type structure. Moreover, a relatively small pitch response can be achieved in a wide wave–frequency range, when the breakwater is Γ-shaped.  相似文献