A machine learning approach for predicting computational intensity and domain decomposition in parallel geoprocessing     

Peng Yue  Fan Gao  Boyi Shangguan  Zheren Yan 《International journal of geographical information science》2020,34(11):2243-2274

ABSTRACT

High performance computing is required for fast geoprocessing of geospatial big data. Using spatial domains to represent computational intensity (CIT) and domain decomposition for parallelism are prominent strategies when designing parallel geoprocessing applications. Traditional domain decomposition is limited in evaluating the computational intensity, which often results in load imbalance and poor parallel performance. From the data science perspective, machine learning from Artificial Intelligence (AI) shows promise for better CIT evaluation. This paper proposes a machine learning approach for predicting computational intensity, followed by an optimized domain decomposition, which divides the spatial domain into balanced subdivisions based on the predicted CIT to achieve better parallel performance. The approach provides a reference framework on how various machine learning methods including feature selection and model training can be used in predicting computational intensity and optimizing parallel geoprocessing against different cases. Some comparative experiments between the approach and traditional methods were performed using the two cases, DEM generation from point clouds and spatial intersection on vector data. The results not only demonstrate the advantage of the approach, but also provide hints on how traditional GIS computation can be improved by the AI machine learning.  相似文献   

基于EEMD和ARIMA的海温预测模型研究          下载免费PDF全文

张莹  谭艳春  彭发定  廖杏杰  余昱昕 《海洋学研究》2019,37(1):9-14

类型丰富、时空分辨率高的海洋探测数据,为信号分解和机器学习算法的应用提供了可能。本文针对如何建立有效的海温预测模型这一问题,使用高时空分辨率的海表温度(SST)融合产品,引入信号处理领域的集合经验模态分解(EEMD)和机器学习领域的自回归积分滑动平均模型(ARIMA)。首先利用最适于分解自然信号的EEMD方法,将海温数据分解成多个确定频率的序列;再利用ARIMA分别对各个频率的序列进行预测,最后将各个序列的预测结果进行组合。该方法在丰富数据的支撑下,比以往直接使用海温数据所建立的预测模型精度更高,为更好地进行海温预测提供了新方法。  相似文献   

基于钻进状态监测的智能工况识别          下载免费PDF全文

范海鹏  吴敏  曹卫华  赖旭芝  陈略峰  陆承达 《探矿工程》2020,47(4):106-113

钻进过程状态监测旨在实时描述钻进工况，判断运行性能优劣程度进行非优追溯，及时指导司钻人员调整作业操作,保证钻进过程安全、高效、稳定开展。钻进工况是钻进系统运行状态的反映，因此开展面向状态监测技术的钻进工况识别研究具有重要的理论和应用价值。本文针对钻进工况识别问题，基于状态监测数据，建立基于支持向量机的钻进工况识别模型，对钻进工况进行识别。综合工况识别结果，对钻进效率进行评估，并对影响钻进效率的因素进行讨论，寻找提升钻进效率的手段。最后，采用钻进现场实钻数据进行仿真实验,验证所提方法的可行性和有效性。  相似文献   

一种基于M估计的Robust-ELM滑坡位移预测方法     

高彩云  高宁 《大地测量与地球动力学》2019,39(2):153-157

采用传统ELM算法进行滑坡位移预测时，其网络输出权值由最小二乘估计得出，导致ELM抗差能力较差，从而造成网络训练参数不准确。为此，将M估计与ELM相结合，提出一种基于M估计的Robust-ELM滑坡变形预测方法。该方法利用加权最小二乘方法来取代最小二乘法计算ELM输出权值，以减少滑坡监测数据中粗差对ELM预测的干扰。分别以链子崖、古树屋滑坡体为例，将Robust-ELM进行了单维、多维粗差的抵御性验证。结果表明，该方法能够有效降低粗差对预测的影响，具有良好的抗差能力。  相似文献   

How do machine learning techniques help in increasing accuracy of landslide susceptibility maps?     

《地学前缘(英文版)》2020,11(3):871-883

Landslides are abundant in mountainous regions.They are responsible for substantial damages and losses in those areas.The A1 Highway,which is an important road in Algeria,was sometimes constructed in mountainous and/or semi-mountainous areas.Previous studies of landslide susceptibility mapping conducted near this road using statistical and expert methods have yielded ordinary results.In this research,we are interested in how do machine learning techniques help in increasing accuracy of landslide susceptibility maps in the vicinity of the A1 Highway corridor.To do this,an important section at Ain Bouziane(NE,Algeria) is chosen as a case study to evaluate the landslide susceptibility using three different machine learning methods,namely,random forest(RF),support vector machine(SVM),and boosted regression tree(BRT).First,an inventory map and nine input factors were prepared for landslide susceptibility mapping(LSM) analyses.The three models were constructed to find the most susceptible areas to this phenomenon.The results were assessed by calculating the receiver operating characteristic(ROC) curve,the standard error(Std.error),and the confidence interval(CI) at 95%.The RF model reached the highest predictive accuracy(AUC=97.2%) comparatively to the other models.The outcomes of this research proved that the obtained machine learning models had the ability to predict future landslide locations in this important road section.In addition,their application gives an improvement of the accuracy of LSMs near the road corridor.The machine learning models may become an important prediction tool that will identify landslide alleviation actions.  相似文献   

基于离散Gabor变换的磁暴识别     

王静  贺巍  汪伟明 《地震地磁观测与研究》2020,41(4):64-69

以地磁秒数据为研究对象，通过离散Gabor变换将时域的地磁数据转换至二维时频面，提取Gabor变换谱图的均值和方差作为特征值，使用支持向量机实现地磁正常数据与磁暴干扰数据的自动分类识别。对5个地磁台的200组地磁秒数据进行计算分析，结果表明该方法对测试样本数据的识别率可达94%。  相似文献   

基于随机森林的光子计数激光雷达点云滤波     

陈博伟  庞勇  李增元  卢昊  梁晓军 《地球信息科学学报》2019,21(6):898-906

新一代星载激光雷达卫星ICESat-2首次采用了微脉冲光子计数激光雷达技术,由于单光子探测的灵敏性导致数据在大气和地表下层产生了大量噪声,因此对光子计数激光雷达点云数据实现信号和噪声的分离是开展进一步应用研究的前提和基础。本文选择美国俄勒冈州和弗吉尼亚州2个研究区,采用MATLAS数据,根据光子点云数据的特点构造了12个光子点云特征,对所构造的特征利用随机森林进行变量筛选,用机器学习方法对光子点云进行分类,并将建立好的模型推广到整个研究区。研究结果表明,本文构建的分类器分类总精度达到了96.79%,Kappa系数为0.94,平均生产者精度和用户精度分别为97.1%和96.8%。在相对弱噪声、平坦地形区域和强噪声、复杂地形区域都取得较好的分类结果。本文结果显示了基于少量样本通过机器学习的方法构建模型,可以推广到较大范围区域的光子点云分类应用中。  相似文献   

Feedback control system for blow-out preventer positioning     

《Applied Ocean Research》2019

During the drilling of ultra-deep-water subsea petroleum wells, a blow-out preventer (BOP), a piece of safety equipment, must be assembled on the wellhead. The BOP is suspended using the drilling riser during the wellhead approach operation, and the riser's top end is connected to the floating platform rig. This article presents a feedback control system for the automatic approach of the BOP to the wellhead. Compared to state-of-the-art controls, ours does not require ancillary thrusters installed alongside the riser nor inclination sensors atop of the drilling riser. Additionally, our proposed control embeds a closed-loop dynamic positioning system, thus retaining the characteristics of the original control system and adding an extra closed-loop. This eases implementation of the BOP approach control to an existing platform. To calculate the optimal gains for the BOP controller, we assume a linear system for the riser, including only the pendulum-shape. The simulation is carried out using nonlinear models for both riser and floating platform. We assume an International Towing Tank Conference standard semi-submersible platform, coupled with a 3000-m free-hanging vertical riser for the time-domain simulation. The results show the BOP tracking to be a step-shaped input signal under current and wave loads. A discussion of the performance of feedback control under different environmental loads is also included.  相似文献   

Building a model-based personalised recommendation approach for tourist attractions from geotagged social media data     

Xiaoyu Sun  Xia Peng  Yiran Chen  Yu Liu 《International Journal of Digital Earth》2019,12(6):661-678

When travelling, people are accustomed to taking and uploading photos on social media websites, which has led to the accumulation of huge numbers of geotagged photos. Combined with multisource information (e.g. weather, transportation, or textual information), these geotagged photos could help us in constructing user preference profiles at a high level of detail. Therefore, using these geotagged photos, we built a personalised recommendation system to provide attraction recommendations that match a user's preferences. Specifically, we retrieved a geotagged photo collection from the public API for Flickr (Flickr.com) and fetched a large amount of other contextual information to rebuild a user's travel history. We then created a model-based recommendation method with a two-stage architecture that consists of candidate generation (the matching process) and candidate ranking. In the matching process, we used a support vector machine model that was modified for multiclass classification to generate the candidate list. In addition, we used a gradient boosting regression tree to score each candidate and rerank the list. Finally, we evaluated our recommendation results with respect to accuracy and ranking ability. Compared with widely used memory-based methods, our proposed method performs significantly better in the cold-start situation and when mining ‘long-tail’ data.  相似文献   

基于PSR-WSVM模型的边坡位移预测     

李建新  刘小生  肖钢  周文  刘仁志 《大地测量与地球动力学》2020,40(6):577-580

为建立高精度的边坡位移预测模型，采用相空间重构（PSR）将边坡位移时间序列数据转换为多维数据，同时构造小波核函数改进的支持向量机模型，建立PSR-WSVM模型并应用于边坡位移预测。将PSR-WSVM模型预测结果与传统支持向量机（SVM）模型、小波支持向量机（WSVM）模型和基于相空间重构的支持向量机（PSR-SVM）模型预测结果进行对比，通过平均绝对误差（MAE）、平均绝对误差百分比（MAPE）和均方根误差（RMSE）3个精度评价指标验证PSR-WSVM模型的可行性。工程实例结果表明，PSR-WSVM模型预测结果的3个精度评价指标都优于另外3种模型，边坡位移预测的精度明显提升。  相似文献