Simulating cross-sectional geometry of the main channel in response to changes in water and sediment in Lower Yellow River     

Wang  Yanjun  Wu  Baosheng  Zhong  Deyu 《地理学报(英文版)》2020,30(12):2033-2052

Journal of Geographical Sciences - To understand the non-equilibrium morphological adjustment of a river in response to environmental changes, it is essential to (i) accurately identify how past...  相似文献   

A Floating Astronomical Time Scale for the Early Late Cretaceous Continental Strata in the Songliao Basin, Northeastern China     

MA Xiaojuan  WU Huaichun  FANG Qiang  SHI Meinan  ZHANG Shihong  YANG Tianshui  LI Haiyan  WANG Chengshan 《《地质学报》英文版》2020,94(1):27-37

A continuous terrestrial succession was recovered from the Songke-2(SK-2) borehole in the Songliao Basin, Northeastern China. This borehole provides a unique material for further research on the continental paleoclimate during Cretaceous greenhouse period, following a series of achievements of the Songke-1(SK-1) core. In this study, thorium(Th) logging data were chosen as a paleoclimate proxy to conduct a detailed cyclostratigraphic analysis. The Th series varies quasi-periodically; power spectra and evolutionary fast Fourier transformation(FFT) analysis reveal significant cycles in the Quantou(K2 q), Qingshankou(K2 qn), Yaojia(K2 y) and Nenjiang(K2 n) formations. The ratio of cycle wavelengths in these stratigraphic units is approximately 20:5:2:1, corresponding to long orbital eccentricity(405 kyr), short orbital eccentricity(100 kyr), obliquity(37 kyr), and precession cycles(22.5 kyr and 18.4 kyr). The durations of the K2 n, K2 y, K2 qn and K2 q are estimated as 6.97, 1.83, 5.30 and 4.52 Myr, respectively, based on the constructed ～18.62 Myr "floating" astronomical time scale(ATS). Comparison of the durations between the SK-1 s and SK-2 boreholes exhibits a slight difference of 0.06 Myr and 0.459 Myr for K2 qn and K2 y. Nevertheless, our ATS of K2 n supports the chronostratigraphic frame constructed by the CA-ID-TIMS data of the SK-1 s borehole. This new "floating" ATS provides precise numerical ages for stratigraphic boundaries, biozones and geological events in the Songliao Basin, and can serve as a basis for correlation of strata and events between marine and terrestrial systems.  相似文献   

云南广南县老寨湾金矿地质特征及找矿标志     

高李阳  顾雄  吴小梅 《云南地质》2020,(1):71-75

广南县老寨湾金矿位于滇、黔、桂“金三角”重要成矿区带上,金矿体矿体呈似层状赋存于断层构造破碎带或层间构造破碎带中,构造控矿明显。矿体围岩均为下泥盆统坡松冲组第一段(D1ps1)硅化石英砂岩;矿床成因属中-低温热液叠加改造型金矿床,断层构造、硅化等矿化蚀变及地球化学异常是重要的找矿标志。  相似文献   

金伯利岩型金刚石矿床研究及其成矿模式探讨——以辽宁瓦房店地区金刚石原生矿矿床为例     

刘礼广  吴大天  韩双  万方来  林少全  杨献忠 《地质学报》2020,94(9):2650-2665

辽宁南部瓦房店金刚石矿是国内最大的金刚石矿产区，现已发现4处金刚石成矿带、120个岩体。其中金伯利岩岩管24个、岩脉89个、可疑岩体7个，累计提交1221万克拉储量，占全国金刚石储量52%。本文主要对该矿床的金刚石母岩—金伯利岩的岩石地球化学特征进行了全面系统分析，发现金伯利岩中MgO、NiO、Cr 2O 3的含量与TiO 2、Al 2O 3、Na 2O、K 2O、CaO、P 2O 5等偏碱性组分呈正相关关系；Ni、Cr、Co含量与金刚石含量呈正相关，而Ti、Zr、Ba元素含量与金刚石含量呈负相关。通过对瓦房店矿区金刚石中石榴石及单斜辉石包裹体、橄榄石- 石榴石矿物对、石榴石微量元素、尖晶石- 橄榄石等多种地质温、压计归纳得出金刚石矿的来源深度为150~210 km,压力5~7 GPa，温度1083~1261℃，在上述温、压条件下，结合岩浆化学组成，估算金伯利岩具有低氧逸度(fO 2=2. 913×1. 01325×10-6Pa)的特点。结合野外勘查工作，总结了该矿床的地质特征、控矿构造、矿体空间分布规律等要素，认为NEE向和NE向断裂控制着金伯利岩体的展布方向和矿体形态。脉状金伯利岩体一般呈NEE 70°~80°方向展布，严格受NEE至近EW向的密集节理或裂隙控制。提出了金刚石母岩—金伯利岩是由源于上地幔岩浆，在一定的封闭条件下，受构造与岩性双重控制，多期性的爆发与侵入交替作用所形成，并建立了具有较高氧逸度和较高密度的流变性软流圈，通过渗滤熔体浸蚀岩石圈形成金刚石的理想成因模式，希望为下一步找矿工作提供参考。  相似文献   

河北省怀安县朱家洼矿区地球化学特征与找矿方向     

王占彬 《地质与勘探》2020,56(1):102-112

河北怀安朱家洼矿区位于华北板块北缘中段太古宙、元古宙、中生代金银铅锌铁硫铁矿成矿带,为火山热液型金多金属矿。为查明该区成矿规律,明确找矿方向,在区内开展了水系沉积物测量、土壤地球化学测量等工作。通过对元素分布、元素相关性、元素异常等特征研究表明,Au、Mo为本区主成矿元素;各元素异常平面分布具有分带性,高温元素W、Sn、Bi异常位于骆驼山火山机构中心,中低温元素Pb、Zn、As、Ag等异常分布于火山机构边部及周边围岩中,成矿元素Au、Mo异常主要位于火山机构西侧围岩中。异常查证发现金钼矿化体2条,金钼矿化受火山机构和北西向构造带控制。依据成矿地质条件、地球化学异常及查证成果认为,朱家洼矿区Au、Mo成矿潜力大,火山机构西侧围岩区是该区重点找矿地段。  相似文献   

中国企业R&D国际化:时空格局与区位选择影响因素     

胡曙虹  杜德斌  范蓓蕾 《地理研究》2019,38(7):1733-1748

基于中国企业海外R&D投资数据和零断尾负二项回归分析方法,探讨了1998—2015年中国企业R&D国际化的时空格局特征,并从东道国角度分析影响其区位选择的主要因素。结果表明：研究期内中国新建海外R&D机构数量快速扩张;海外R&D投资区域分布广泛,呈现分散和集聚并存的特征;以华为为例分析了典型中国企业海外R&D投资的空间布局特征,认为目前华为海外R&D投资呈现集中布局在欧洲,零散分布在亚洲、美洲、非洲的空间特征,主要是由其以全球技术升级和满足多样化的市场需求等R&D国际化的战略动机所决定。回归分析结果表明,中国企业对发达国家和发展中国家进行R&D投资的影响因素有共同点但也存在一定的差异：① 现阶段东道国的R&D需求不是影响中国企业对其进行R&D投资的主要因素;② 代表中国与东道国经济往来密切程度的关联要素是影响中国企业R&D投资的重要决策因素;③ 发达国家吸引中国企业对其进行R&D投资主要是因其创新能力强、R&D资源数量多,而政策及制度供给是影响中国企业对发展中国家进行R&D投资的主要因素;④ 地理距离对中国企业R&D“走出去”的阻碍作用主要体现在对发展中国家的R&D投资中。  相似文献   

川滇地块西部差异性旋转的构造意义:青藏高原东南缘白垩纪红层古地磁学新证据          下载免费PDF全文

王恒  杨振宇 《地球物理学报》2019,62(5):1789-1808

印度—欧亚板块碰撞以来青藏高原内部及其周缘地区经历了复杂的构造演化,复杂构造变形区的复合构造使得古地磁的数据解释究竟代表区域的构造旋转还是只能反映局部的构造变形一直是备受关注的问题.本文通过采集川滇地块西缘渔泡江断裂东侧三岔河地区白垩纪红层古地磁样品,揭示采样区差异性旋转并探讨川滇地块西部自中新世以来的构造演化规律.前人的地质调查表明川滇地块渔泡江断裂东侧上白垩统赵家店组地层发育倾伏褶皱.三岔河剖面以三岔河镇为界分为南北两段,三岔河南段剖面高温剩磁分量平均方向在倾斜校正后Ds=29.3°,Is=45.7°,ks=54.3,α95=6.6°,倾伏地层产状校正后Ds=30.6°,Is=46.6°,ks=69.3,α95=5.8°;而三岔河北侧剖面高温剩磁分量平均方向在倾斜校正后Ds=350.4°,Is=42.1°,ks=69.4,α95=9.2°,倾伏地层产状校正后Ds=347.4°,Is=41.9°,ks=96.6,α95=7.8°;两组高温剩磁分量均通过了褶皱检验,表明其获得于褶皱形成之前.相对于东亚稳定区80Ma古地磁极,三岔河南侧剖面发生了20.5°±4.8°的顺时针构造旋转量,与楚雄盆地核部之间不存在差异性旋转;但三岔河镇以北剖面却发生了22.7°±6.6°的逆时针旋转.综合分析川滇地块内部的古地磁数据表明自中新世以来川滇地块南部楚雄盆地经历了约20°的顺时针构造旋转,而三岔河镇北侧经历了约20°逆时针旋转.进一步分析表明三岔河北侧剖面相对于南侧剖面经历了约40°的逆时针旋转,可能由于研究区的滑脱构造导致岩石薄弱层拆离滑脱所引起.  相似文献   

Responding to Global Warming: Mitigation Policies and Actions of Stakeholders in China’s Tourism Industry     

FENG Ling  CHEN Da  GAO Shan  WANG Yongzhi  TANG Chengcai 《资源与生态学报(英文版)》2019,10(1):94-103

China’s tourism industry has witnessed rapid progress in recent years, and is now an important part of global tourism in dealing with climate change. Within a framework of Pressure-State-Response (PSR), this paper focuses on the emission reduction pressure, carbon emission status, and responses of stakeholders in China’s tourism industry. Findings include: 1) The central government’s strategy and rapid growth of the industry scale exert rising pressure on China’s tourism to reduce carbon emissions. 2) Carbon emissions of China's tourism account for 13%-14.6% of global tourism, and about 3% of China’s emissions overall. Chinese tourists’ per capita carbon emission is lower than half of the global level. 3) The Chinese government attaches great importance to energy-saving and carbon emission reduction. In the tourism industry, documents, standards and other regulative measures have been issued to ensure that business practitioners set up green operational and managerial systems. In the field of tourism transportation, China's high-speed rail, new energy vehicles, and urban shared bicycles, have developed very rapidly in recent years, and they have effectively reduced the carbon emissions in traveling. Furthermore, this paper finds that Chinese tourists already have awareness and willingness for low-carbon tourism.  相似文献   

尼日尔三角洲东部深水区构造特征及其形成机理     

赵江  王秋良  卢圣力  付博  杜峰 《大地测量与地球动力学》2019,39(7):691-695

研究尼日尔三角洲东部深水区块发现，整个盆地从陆向洋具有3个大的构造分区：伸展拉张区、过渡区和挤压逆冲区。伸展区以大型同沉积断层伴生大量滚动背斜构造为特征，过渡区发育大量泥底辟构造，挤压区以复杂的逆冲叠瓦构造为主。通过分析形成机理，揭示东部深水转换带上M研究区构造特征，按构造的演化特征将该区构造分为泥底辟型、冲断-泥底辟混合型、逆冲型3种类型，提出研究区内的圈闭主要以构造-岩性圈闭为主，为尼日尔三角洲盆地深水勘探提供新的理论指导。  相似文献   

Dynamic loading tests and seismic response analysis of a stud-type damper composed of multiple friction units with disc springs     

Takeshi Sano  Kazutaka Shirai  Yasumasa Suzui  Yoshikazu Utsumi 《地震工程与结构动力学》2020,49(13):1259-1280

This paper presents an experimental study on the performance of a shear-sliding stud-type damper composed of multiple friction units with high-tension bolts and disc springs. A numerical evaluation of the response reduction effects achieved by the stud-type damper is also presented. In dynamic loading tests, the behavior of stud-type multiunit friction damper specimens was investigated. Three different full-scale damper specimens, which were composed of five, six, or seven friction units with two or four sliding surfaces, were incorporated into loading devices for testing. The stud-type friction dampers demonstrated stable rigid-plastic hysteresis loops without any remarkable decrease in the sliding force even when subjected to repetitive loading, in addition to showing no unstable behavior such as lateral buckling. The damper produced a total sliding force approximately proportional to the number of sliding surfaces and friction units. The total sliding force of the stud-type damper can thus be estimated by summing the contributions of each friction unit. In an earthquake response simulation, the control effects achieved by stud-type dampers incorporated into an analytical high-rise building model under various input waves, including long-period, long-duration and pulse-like ground motions, were evaluated. A satisfactory response reduction was obtained by installing the developed stud-type dampers into the main frame without negatively impacting usability and convenience in terms of building planning.  相似文献