结合变差纹理特征的极化SAR建筑物震害信息提取          下载免费PDF全文

肖修来  翟玮  郭晓  张皓然 《地震工程学报》2020,42(2):568-578

快速评估建筑物地震灾害信息对地震应急救援工作有着指导意义,而极化SAR具有全天候、全天时的特点,因此利用极化SAR图像提取震害信息已逐渐成为研究热点。虽然极化SAR具有丰富的极化信息,但其纹理信息不可忽略,尤其是完好的人工建筑物在图像上呈现规则的纹理特征,而倒塌建筑区域纹理分布杂乱,因此结合纹理信息也可以很好地提取建筑物信息。以2010年玉树地区的全极化SAR数据为研究对象,首先,利用Yamaguchi分解的体散射分量PV提取了SAR图像中的建筑物区域以及道路、水系等非建筑物信息,在此基础上,对相干散射矩阵T11分量中倒塌建筑物、完好建筑区域进行变差计算,根据变差曲线确定变程a后,再对建筑物区域采取窗口m*m(m=3*a)进行变差计算得到变差纹理信息,最后利用FCM算法对变差纹理信息分别提取完好建筑物和倒塌建筑物区域,为了对比分析,文章利用Yamaguchi分解的二次散射分量PD提取完好建筑物区域,与震后光学遥感图像对应样本点进行人工验证,得到完好建筑物的提取精度为80.18%,倒塌建筑物的提取精度为84.54%,道路水系的提取精度为77.58%。  相似文献   

China’s rural revitalization and development: Theory,technology and management     

Liu  Yansui  Zang  Yuzhu  Yang  Yuanyuan 《地理学报(英文版)》2020,30(12):1923-1942

Journal of Geographical Sciences - The urban-rural transformation from dichotomy to integration is a gradual process. Like rural areas in many countries, Chinese rural society is experiencing a...  相似文献   

A comparison of neighbourhood relations based on ordinary Delaunay diagrams and area Delaunay diagrams: an application to define the neighbourhood relations of buildings     

Hiroyuki Usui  Akihiro Teraki  Kei-ichi Okunuki  Toshiaki Satoh 《International journal of geographical information science》2020,34(11):2177-2203

ABSTRACT

The aim of this article is to describe a convenient but robust method for defining neighbourhood relations among buildings based on ordinary Delaunay diagrams (ODDs) and area Delaunay diagrams (ADDs). ODDs and ADDs are defined as a set of edges connecting the generators of adjacent ordinary Voronoi cells (points representing centroids of building polygons) and a set of edges connecting two centroids of building polygons, which are the generators of adjacent area Voronoi cells, respectively. Although ADDs are more robust than ODDs, computation time of ODDs is shorter than that of ADDs (the order of their computation time complexity is O(nlogn)). If ODDs can approximate ADDs with a certain degree of accuracy, the former can be used as an alternative. Therefore, we computed the ratio of the number of ADD edges to that of ODD edges overlapping ADDs at building and regional scales. The results indicate that: (1) for approximately 60% of all buildings, ODDs can exactly overlap ADDs with extra ODD edges; (2) at a regional scale, ODDs can overlap approximately 90% of ADDs with 10% extra ODD edges; and (3) focusing on judging errors, although ADDs are more accurate than ODDs, the difference is only approximately 1%.  相似文献   

典型矿业城市建筑物抗震安全性能调查与分析——以铜陵市为例     

谢瑞杰  管斌  樊冬  徐强  洪阳  汪树理 《华北地震科学》2020,38(1):78-84

针对矿业城市长期矿产资源的开发,产生的一系列矿山地质环境问题,严重影响城市建筑物抗震性能的情况。以铜陵市为例,通过对铜陵市建筑物抗震性能开展全面普查,掌握建筑物抗震基本情况,研究了矿业城市滑坡、崩塌、泥石流、采空塌陷、岩溶塌陷等典型地质灾害对建筑物抗震性能的具体影响,提出加大棚户区改造、开展土地利用防灾适宜性评价、建立地质灾害监控体系等对策建议,对提高矿业城市抗震设防工作有实际意义。  相似文献   

张家口蔚县农村房屋抗震性能调查及统计分析     

马旭东  牛露  刘晓丹  刘龙  茅远哲  关恒瑜  刘贾贾  刘志辉 《震灾防御技术》2019,14(4):829-837

为进一步了解蔚县地区农村房屋的抗震性能，在该地区选取43个村庄、7732栋房屋进行实地调查和统计分析。主要调查房屋结构、建筑材料、房屋抗震构造措施等内容，分析各结构类型房屋抗震薄弱环节及房屋抗震性能，并统计分析经济、交通、地形等因素与房屋结构类型及抗震性能的关系，提出提高该地区农村房屋抗震性能的建议。  相似文献   

Dynamic loading tests and seismic response analysis of a stud-type damper composed of multiple friction units with disc springs     

Takeshi Sano  Kazutaka Shirai  Yasumasa Suzui  Yoshikazu Utsumi 《地震工程与结构动力学》2020,49(13):1259-1280

This paper presents an experimental study on the performance of a shear-sliding stud-type damper composed of multiple friction units with high-tension bolts and disc springs. A numerical evaluation of the response reduction effects achieved by the stud-type damper is also presented. In dynamic loading tests, the behavior of stud-type multiunit friction damper specimens was investigated. Three different full-scale damper specimens, which were composed of five, six, or seven friction units with two or four sliding surfaces, were incorporated into loading devices for testing. The stud-type friction dampers demonstrated stable rigid-plastic hysteresis loops without any remarkable decrease in the sliding force even when subjected to repetitive loading, in addition to showing no unstable behavior such as lateral buckling. The damper produced a total sliding force approximately proportional to the number of sliding surfaces and friction units. The total sliding force of the stud-type damper can thus be estimated by summing the contributions of each friction unit. In an earthquake response simulation, the control effects achieved by stud-type dampers incorporated into an analytical high-rise building model under various input waves, including long-period, long-duration and pulse-like ground motions, were evaluated. A satisfactory response reduction was obtained by installing the developed stud-type dampers into the main frame without negatively impacting usability and convenience in terms of building planning.  相似文献   

建筑抗震实时混合试验时滞补偿方法研究综述          下载免费PDF全文

刘洪波  刘洁 《地震工程学报》2020,42(6):1361-1368

时滞补偿是建筑抗震实时混合试验的重要问题。文章对时滞补偿方法的研究进行总结，将时滞补偿方法分为基于时间的位移预测时滞补偿方法、基于反馈力的位移预测时滞补偿方法、基于加载系统模型求逆的时滞补偿方法、基于控制理论的时滞补偿方法和基于集成理念的综合补偿方法。  相似文献   

村镇滑移隔震建筑瞬时摩擦耗能的参数敏感性分析          下载免费PDF全文

孙敏  王锦燕  孙光林 《世界地震工程》2020,(3):100-108

给出了村镇滑移隔震建筑瞬时摩擦耗能的概念，并以此概念为响应指标。通过极差大小的对比，分析了该响应指标对刚度比、第二阶段刚度系数、隔震层屈服位移、隔震层摩擦系数、系统质量比和上部结构自振周期六个参数变化的敏感程度，阐述了上述系统参数对瞬时摩擦耗能这一响应指标的影响规律。研究表明:场地条件和地震动幅值大小对瞬时摩擦耗能均有显著影响；在所考虑的参数范围内，上部结构自振周期总是对瞬时摩擦耗能有较为显著的影响，摩擦系数对瞬时摩擦耗能的影响跟场地条件有关，Ⅰ类场地条件中摩擦系数对瞬时摩擦耗能影响不显著，而Ⅱ、Ⅲ和Ⅳ类场地条件中，摩擦系数对瞬时摩擦耗能的影响则非常显著；隔震层屈服位移、刚度比和第二阶段刚度系数总得来讲对瞬时摩擦耗能影响不显著，质量比对瞬时摩擦耗能影响居中。  相似文献   

圆柱形支撑大跨度建筑结构强震冲击分析模型仿真   总被引：3，自引：2，他引：1       下载免费PDF全文

吴海波  王新妮 《地震工程学报》2018,40(1):48-53

圆柱形支撑大跨度建筑稳定性较差,不能在强震冲击下保持稳定的结构状态。为解决此问题,设计圆柱形支撑大跨度建筑结构强震下冲击分析仿真模型,通过圆柱分析法则的确定、有限元支撑模拟分析与监测、圆柱形支撑体系承载能力分析以完成模型的仿真分析与监测。基于此对大跨度建筑结构强震冲击进行静力分析,调整强震冲击下模型的结构,完成模型的搭建。模拟强震冲击环境,设计对比实验结果表明,应用圆柱形支撑大跨度建筑结构强震下冲击分析仿真模型,可明确圆柱形支撑大跨度建筑薄弱点,发现稳定性较差建筑结构单元,达到提升圆柱形支撑大跨度建筑在强震冲击下稳定性的目的。  相似文献   

Discussion of user-defined parameters for recursive subspace identification: Application to seismic response of building structures     

Shieh-Kung Huang  Jun-Da Chen  Kenneth J. Loh  Chin-Hsiung Loh 《地震工程与结构动力学》2020,49(15):1738-1757

Structural damage assessment under external loading, such as earthquake excitation, is an important issue in structural safety evaluation. In this regard, an appropriate data analysis and system identification technique is required to interpret the measured data and to identify the state of the structure. Generally, the recursive system identification algorithm is used. In this study, the recursive subspace identification (RSI) algorithm based on the matrix inversion lemma algorithm with oblique projection technique (RSI-Inversion-Oblique) is applied to investigate the time-varying dynamic characteristics. The user-defined parameters used in the RSI-Inversion-Oblique technique are carefully discussed, which include the size of the data Hankel matrix (i), model order to extract the physical modes, and forgetting factor (FF) to detect the time-varying system modal frequencies. Response data from the Northridge earthquake from the Sherman Oaks building (CSMIP) is used as an example to examine a systematic method to determine the suitable user-defined parameters in RSI. It is concluded that the number of rows in the data Hankel matrix significantly influences the identification of the time-varying fundamental modal frequency of the structure. An algorithmic model order selection method using the eigenvalue distribution of RSI-Inversion can detect the system modal frequencies at each appending data window without causing any abnormality.  相似文献