辛安煤矿1402工作面临空窄煤柱采掘响应及动态加固     

汪北方  梁冰  刘维  张晶  迟海波  刘亚辉 《煤田地质与勘探》2020,48(1):145-153

随着我国煤炭资源去产能整合煤矿的增多，复采工作面临空窄煤柱采动失稳问题日益凸显，已严重制约矿井安全高效生产。为此，针对辛安煤矿复采1402工作面辅运巷道5号钻场临空窄煤柱稳定性控制的工程难题，运用数值模拟与理论分析相结合的方法，探究5号钻场临空窄煤柱稳定性采掘扰动响应特征，提出5号钻场临空窄煤柱动态注浆加固技术方案并开展现场应用和效果检验。研究结果表明:1402工作面辅运巷道掘进对5号钻场临空窄煤柱稳定性影响较小；在1402工作面回采期间，距5号钻场18~6 m范围，临空窄煤柱集中垂直应力由非对称马鞍形分布逐渐过渡为拱形分布；距5号钻场6 m时，临空窄煤柱承载叠加垂直应力超过煤体强度，塑性区完全贯通，极易破坏失稳；现场采用MP364型注浆材料及专用注浆设备对5号钻场临空窄煤柱前后5 m区域进行加固，动态注浆始终超前工作面10 m，通过深孔窥视和气体监测手段验证临空窄煤柱良好的封堵固化效果，保障了工作面安全回采，为我国整合矿井类似条件下煤柱稳定性控制提供借鉴和参考。移动阅读   相似文献   

水平分支注浆孔卡埋钻事故处理实践          下载免费PDF全文

石逊  刘江  李红梅  伍晓龙  王雷浩 《探矿工程》2020,47(9):33-38

近年来煤矿奥灰治水注浆定向钻进技术发展迅速，多分支超深水平注浆孔数量激增。在水平注浆孔施工过程中，普遍存在地层漏失量大，泥浆突然失返，小径钻孔裸孔段长，水平段孔眼轨迹复杂，控制难度大，靶点技术误差要求严，定向仪器、工具等价格昂贵，施工风险相对较高，极易发生埋钻卡钻事故。一旦发生卡钻事故，就会面临着处理周期长、处理难度大等问题，传统的卡埋钻处理方法在水平注浆孔中应用效果不明显。通过采用空压机输送压缩空气，破坏水平孔着床的沉砂结构，将着床的沉砂吹出孔外或吹入地层裂隙，成功地实现了解卡。总结了水平注浆孔施工中卡埋钻事故的预防措施。  相似文献   

Experimental study on a sampling technique based on a freeze-sediments valve for deep-sea microorganism     

《Applied Ocean Research》2019

Deep-sea microorganism research has become a hot topic in life science, owing to its special value in high pressure and low temperature environment. If not kept the in-situ low temperature and high pressure, it will cause the microorganism to lose its activity and lead to a waste of resources. A freeze-sediments valve presents a promising solution to maintain the low temperature and high pressure in situ, improve the success rate of sampling and shorten the sampling time. A series of experiments were conducted to characterize the freeze-sediments valve, including the sampling time without leakage, adaptation to different sediments and the effect of the length, etc. Most important of all, temperature change of sediments is observed in all experiments. Experimental results indicated that the freeze-sediments valve was formed in 5 min without leakage and the freeze-sediments valve could be applied to different sediments without limitations on sediments type and mineral content. Considering the pressure retaining capacity and formation time of freeze-sediments valve, it was found that the freeze-sediments valve with a length of 60–80 mm has good pressure retaining capacity whose value was 41.3–48.4 Mpa and short formation time which was 5 min. Precooling the sampler could be used to shorten the sampling time in the actual environment application. This sampling technique can play a vital role in maintaining in-situ low temperature at −2 to −4 ° Celsius in all the experiments. According to the tests, the sampling technique based on the freeze-sediments valve had the potential to solve the problem of keeping in-situ temperature, low sampling success rate and long sampling time in the future.  相似文献   

Fracture grouting and geonails for soft soil tunnelling     

Y. M. Cheng  S. K. Au  H. Wong 《Geomechanics and Geoengineering》2019,14(2):99-117

To stabilise the tunnel faces and slopes in soft clay for the Airport Link construction in Australia, fracture grouting and glass fibre-reinforced plastic (GFRP) soil nails are proposed for the soil improvement as well as ease of handling. The compensation caused by the fracture grouting and the gain in strength due to consolidation as well as the geonail have stabilised the soft clay during construction. Only a small amount of ground settlement during soft clay box-jacking operation is generated so that the railway traffic above the embankment can be maintained without interference. The design method of the fracture grouting ground improvement study for this difficult project is discussed in this paper. Extensive laboratory and field tests were employed to verify the design assumptions and to fine-tune the ground improvement studies. The success of this project in poor ground conditions results from combined efforts of extensive field tests, an improved ground improvement design method and a realistic numerical analysis to assess the unstable/highly stressed zones for the placement of soil reinforcement.  相似文献   

圆钢管约束高强灌浆料局部承压性能研究          下载免费PDF全文

张啸驰  陈建伟  闫文赏  郑玲玲 《地震工程学报》2018,40(3):612-618

以圆钢管约束高强灌浆料局部承压性能试验为基础,基于ABAQUS有限元计算平台,通过建立分段模型(Multi-section Model简称MSM模型)进行数值模拟,探究圆钢管约束高强灌浆料在局部承压作用下的力学性能,并将软件计算得到的荷载-位移曲线与试验结果进行对比分析。结果表明,分段模型适用于圆钢管约束高强灌浆料局部承压作用下的数值模拟,且计算结果与试验结果吻合较好;增大试件高径比、钢管壁厚和高强灌浆料强度均可提高其极限承载力。  相似文献   

基于流体体积法的劈裂注浆有限元分析     

朱旻  龚晓南  高翔  刘世明  严佳佳 《岩土力学》2019,40(11):4523-4532

劈裂注浆作为一种有效的土体加固方法，其理论研究落后于工程实践。提出了基于弥散裂缝模型和流体体积法的劈裂注浆有限元分析方法，并通过ABAQUS二次开发编写劈裂注浆有限元程序。数值分析结果能与室内试验较好吻合，验证了有限元算法的合理性。在此基础上研究了注浆孔埋深和注浆流量对劈裂浆脉形状的影响。结果表明，劈裂注浆过程可分为起劈和劈裂发展两个阶段。当劈裂浆脉扩展到模型边界后，继续注浆会引起注浆压力的大幅提高和已有浆脉宽度的增加。随着注浆孔埋深的增加，浆脉分支减少，长度减小，宽度增加，劈裂浆脉形状的主要控制因素从土体参数的随机性变成大小主应力值的差异。注浆量一定的情况下，注浆速率越大，劈裂浆脉长度越短，宽度越大，注浆终压也越大。研究为劈裂注浆的工程应用提供理论支撑。  相似文献   

耐压柱壳参数化设计与灵敏度分析     

刘峰  王贺  苗怡然  屠超华  赵彦凯 《海洋技术学报》2019,38(1)

为提高耐压柱壳设计效率,设计了耐压柱壳参数化分析流程。研究了有限元分析所涉及的材料属性、载荷施加、边界条件设置等内容,确定了采用弧长法分析耐压柱壳稳定性。利用Python语言对于ABAQUS软件进行了二次开发,利用Isight软件实现了ABAQUS的集成,实现了耐压柱壳有限元分析模型的网格自动划分、自动分析计算等。选择样本点进行参数化分析,利用响应面模型对于样本点进行了拟合,得到了具有较高拟合精度、满足工程需要的近似模型,进行了设计变量的灵敏度分析。研究结果表明:参数化分析流程可实现耐压柱壳的自动分析、近似模型及灵敏度分析,可降低耐压柱壳分析难度,均可提高耐压柱壳设计效率。  相似文献   

Analytical model of well leakage pressure perturbations in a closed aquifer system     

《Advances in water resources》2014

Deep saline aquifers are commonly used for disposal and storage of various surface fluids. The target injection zone must be hydraulically isolated from overlying zones in order to ensure containment of the injected fluids. Improperly plugged nonoperational abandoned wells that penetrate the injection zone are the main potential leakage pathways. Leakage through such wells may cause an observable pressure signal in a zone overlying the injection zone; such a signal can be used to detect the leakage. In this paper we develop an analytical model to evaluate the pressure change induced by leakage through a well in a multilayer system. Unlike previous analytical models on the topic, our model uses a closed system, which may significantly affect the strength and behavior of the pressure signal induced by leakage. The analytical model is first presented for a two-layer system centered at the leaky well location. We evaluate the leakage-induced pressure change using the Laplace transform of Duhamel’s superposition integral, yielding the solution in the Laplace domain. We then derive a late-time asymptotic solution using the final value theorem, which suggests that the leakage rate becomes constant after sufficient time. We then obtain the multilayer solution by extending the two-layer solution and presenting it in matrix form in the Laplace domain. We apply the solution to three examples. In the first example, we apply the analytical model to a two-layer system, investigating its behavior and comparing the results with a numerical solution. In order to demonstrate behavior and potential applications of the multilayer analytical model, we present two multilayer examples: one with identical layers and another, replicating a CO₂ storage site, with dissimilar layers. The leakage-induced pressure change does not necessarily decrease as the distance increases from the injection zone toward the surface.  相似文献   

全风化花岗岩地层中高固相离析浆液灌浆机理研究          下载免费PDF全文

赵钰  郑洪  曹函  林飞  王旭斌  贺茉莉 《水文地质工程地质》2021,48(2):78-88

全风化花岗岩地层稳定性差、遇水易发生崩解,工程上使用常规材料防渗加固注浆时效果较差。针对这一情况,依托湖南省郴州市莽山水库防渗加固灌浆项目,通过自主设计的全风化花岗岩地层注浆室内模拟试验装置,进行模拟注浆试验,实现了浆液在整个注浆过程中的扩散情况模拟,对不同注浆压力、不同位置点所取试样开展单轴抗压、抗剪强度及渗透率测试试验,对不同注浆压力下完整结石体取样观察,研究以全风化花岗岩颗粒为配方主体材料的高固相离析浆液在全风化花岗岩地层的防渗加固效果及浆液扩散模式。结果表明:该浆液在全风化花岗岩地层扩散过程中经历了渗透扩散、挤密压缩、劈裂扩展三个阶段,是一种复合注浆形式;以全风化花岗岩颗粒为主体的高固相离析浆液在全风化花岗岩地层注浆中效果显著,随着注浆压力提升,单轴抗压强度显著提升为原土体的3.25～13.67倍,抗剪强度在不同法向压力情况下提升为原土体的1.63～2.69倍,渗透系数从10?4 cm/s下降至10?5 cm/s甚至10?6 cm/s。  相似文献   

粗砂砾石地层中高压旋喷桩隔水帷幕施工技术          下载免费PDF全文

张红涛 《探矿工程》2021,48(6):113-117

太原万达广场A2区商住楼基坑工程部分区域为粗砂砾石地层,基坑隔水帷幕中深层搅拌桩无法有效使用。提出了在粗砂砾石地层采用高压旋喷桩隔水帷幕的施工技术方案,采用双套管锚杆钻机引孔、单管高压喷射工艺进行施工,成功实施了这一工程。经检查,喷射注浆体相互咬合良好,有效桩径内水泥含量均匀无夹块现象,隔水帷幕止水效果良好。  相似文献