日照市露天开采矿山地质环境问题及恢复治理措施          下载免费PDF全文

汪继学  尹俊凯  陈鹏  张承斌 《山东国土资源》2018,34(12)

通过1∶5万矿山地质环境调查和遥感解译手段,对日照市矿山进行了全面的调查,查明各类矿山546处,主要集中在莒县和五莲县境内。除莒县刘官庄煤矿外,其余全部为露天开采矿山,主要选用直接开挖的方式,不仅破坏了地表环境,而且矿山生产活动产生的固体废弃物占用了大面积的土地。该文根据矿山地理位置及开采方式的不同,将相同类型的多个矿山划分为同一治理区,针对不同治理区的特点,采取科学有效的治理方法,建立健全矿山地质环境监督管理机制,切实解决矿山地质环境问题,改善生态环境。  相似文献   

Combined mine tremors source location and error evaluation in the Lubin Copper Mine (Poland)     

Andrzej Leniak  Grzegorz Pszczo&#x;a 《Tectonophysics》2008,456(1-2):16

A modified method of mine tremors location used in Lubin Copper Mine is presented in the paper. In mines where an intensive exploration is carried out a high accuracy source location technique is usually required. The effect of the flatness of the geophones array, complex geological structure of the rock mass and intense exploitation make the location results ambiguous in such mines. In the present paper an effective method of source location and location's error evaluations are presented, combining data from two different arrays of geophones. The first consists of uniaxial geophones spaced in the whole mine area. The second is installed in one of the mining panels and consists of triaxial geophones. The usage of the data obtained from triaxial geophones allows to increase the hypocenter vertical coordinate precision. The presented two-step location procedure combines standard location methods: P-waves directions and P-waves arrival times. Using computer simulations the efficiency of the created algorithm was tested. The designed algorithm is fully non-linear and was tested on the multilayered rock mass model of the Lubin Copper Mine, showing a computational better efficiency than the traditional P-wave arrival times location algorithm. In this paper we present the complete procedure that effectively solves the non-linear location problems, i.e. the mine tremor location and measurement of the error propagation.  相似文献   

Numerical modeling for analyzing thermal surface anomalies induced by underground coal fires     

Stefan Wessling  Claudia Kuenzer  Winfried Kessels  Manfred W. Wuttke 《International Journal of Coal Geology》2008,74(3-4):175-184

Coal seams burning underneath the surface are recognized all over the world and have drawn increasing public attention in the past years. Frequently, such fires are analyzed by detecting anomalies like increased exhaust gas concentrations and soil temperatures at the surface. A proper analysis presumes the understanding of involved processes, which determine the spatial distribution and dynamic behavior of the anomalies.In this paper, we explain the relevance of mechanical and energy transport processes with respect to the occurrence of temperature anomalies at the surface. Two approaches are presented, aiming to obtain insight into the underground coal fire situation: In-situ temperature mapping and numerical simulation. In 2000 to 2005, annual temperature mapping in the Wuda (Inner Mongolia, PR China) coal fire area showed that most thermal anomalies on the surface are closely related to fractures, where hot exhaust gases from the coal fire are released. Those fractures develop due to rock mechanical failure after volume reduction in the seams. The measured signals at the surface are therefore strongly affected by mechanical processes.More insight into causes and effects of involved energy transport processes is obtained by numerical simulation of the dynamic behavior of coal fires. Simulations show the inter-relation between release and transport of thermal energy in and around underground coal fires. Our simulation results show a time delay between the coal fire propagation and the observed appearance of the surface temperature signal. Additionally, the overall energy flux away from the burning coal seam into the surrounding bedrock is about 30-times higher than the flux through the surface. This is of particular importance for an estimation of the energy released based on surface temperature measurements. Finally, the simulation results also prove that a fire propagation rate estimated from the interpretation of surface anomalies can differ from the actual rate in the seam.  相似文献   

Supercritical gas sorption on moist coals   总被引：2，自引：1，他引：1  

Stuart Day  Richard Sakurovs  Steve Weir 《International Journal of Coal Geology》2008,74(3-4):203-214

The effect of moisture on the CO₂ and CH₄ sorption capacity of three bituminous coals from Australia and China was investigated at 55 °C and at pressures up to 20 MPa. A gravimetric apparatus was used to measure the gas adsorption isotherms of coal with moisture contents ranging from 0 to about 8%. A modified Dubinin–Radushkevich (DR) adsorption model was found to fit the experimental data under all conditions. Moisture adsorption isotherms of these coals were measured at 21 °C. The Guggenheim–Anderson–de Boer (GAB) model was capable of accurately representing the moisture isotherms over the full range of relative pressures.Moist coal had a significantly lower maximum sorption capacity for both CO₂ and CH₄ than dry coal. However, the extent to which the capacity was reduced was dependent upon the rank of the coal. Higher rank coals were less affected by the presence of moisture than low rank coals. All coals exhibited a certain moisture content beyond which further moisture did not affect the sorption capacity. This limiting moisture content was dependent on the rank of the coal and the sorbate gas and, for these coals, corresponded approximately to the equilibrium moisture content that would be attained by exposing the coal to about 40–80% relative humidity. The experimental results indicate that the loss of sorption capacity by the coal in the presence of water can be simply explained by volumetric displacement of the CO₂ and CH₄ by the water. Below the limiting moisture content, the CO₂ sorption capacity reduced by about 7.3 kg t^− 1 for each 1% increase in moisture. For CH₄, sorption capacity was reduced by about 1.8 kg t^− 1 for each 1% increase in moisture.The heat of sorption calculated from the DR model decreased slightly on addition of moisture. One explanation is that water is preferentially attracted to high energy adsorption sites (that have high energy by virtue of their electrostatic nature), expelling CO₂ and CH₄ molecules.  相似文献   

Environmental risk evaluation of the use of mine spoils and treated sewage sludge in the ecological restoration of limestone quarries     

M. M. Jordán  S. Pina  F. García-Orenes  M. B. Almendro-Candel  E. García-Sánchez 《Environmental Geology》2008,55(2):453-462

The ecologic restoration criteria in areas degraded from extraction activities require making use of their mine spoils. These materials do not meet fertility conditions to guarantee restoration success and therefore, need the incorporation of organic amendments to obtain efficient substratum. Reducing the deficiencies in the organic material and restoration material nutrients with the contribution of treated sewage sludge is proposed in this work. This experiment was based on a controlled study using columns. The work was conducted with two mine spoils, both very rich in calcium carbonate. The first mineral, of poor quality, came from the formation of aggregates of crushed limestone (Z). The other residual material examined originated in limestone extraction, formed by the levels of interspersed non-limestone materials and the remains of stripped soils (D). Two treatments were undertaken (30,000 and 90,000 kg/ha of sewage sludge), in addition to a control treatment. The water contribution was carried out with a device that simulated either short-duration rain or a flooding irrigation system in order to cover the surface and then percolate through the soil. The collection of leached water took place 24 h after the applications. Different parameters of the leached water were determined, including pH, electrical conductivity, nitrate anions, ammonium, phosphates, sulphates and chlorides. The values obtained for each irrigation application are discussed, and the nitrate values obtained were very elevated.  相似文献   

Composition and quality of coals in the Huaibei Coalfield, Anhui, China   总被引：3，自引：0，他引：3  

Liugen Zheng  Guijian Liu  Lei Wang  Chen-Lin Chou 《Journal of Geochemical Exploration》2008,97(2-3):59-68

The Huaibei Coalfield, Anhui Province, China, is one of the largest coalfields in China. The coals of Permian age are used mainly for power generation. Coal compositions and 47 trace elements of the No. 10 Coal of the Shanxi Formation, the No. 7, 5, and 4 Coals of the Lower Shihezi Formation, and the No. 3 Coal of the Upper Shihezi Formation from the Huaibei Coalfield were studied. The results indicate that the Huaibei coals have low ash, moisture, and sulfur contents, but high volatile matter and calorific value. The ash yield increases stratigraphically upwards, but the volatile matter and total sulfur contents show a slight decrease from the lower to upper seams. Magmatic intrusion into the No. 5 Coal resulted in high ash, volatile matter, and calorific value, but low moisture value in the coal. Among the studied 47 trace elements, Ba, Co, Cr, Cu, Hg, Mo, Ni, Pb, Sb, Th, U, V, and Zn are of environmental concerns. Four elements Hg, Mo, Zn, and Sb are clearly enriched in the coals as compared with the upper continental crust.  相似文献   

贵州晴隆大厂晚二叠世初期河流相沉积特征——兼论与上下地层接触关系     

李明道 《贵州地质》2008,25(3)

晚二叠世初期,在晴隆大厂一带,以"大厂层"为基底的山间盆地中,形成了一条自北东流向南西的规模较大的曲流河。该河流微相发育,其沉积物包括河道砾岩、边滩砂屑岩和洪泛平原泥质岩等。这套沉积地层上与上二叠统峨眉山玄武岩下与"大厂层"或局部与中二叠统茅口组接触。此乃峨眉地幔隆起边缘的沉积效应。  相似文献   

直升机大比例尺航空物探在深部找矿中的应用前景   总被引：4，自引：1，他引：3  

熊盛青  于长春  王卫平  范正国  王乃东  万建华  张洪瑞 《地球科学进展》2008,23(3):270-275

为克服深部及矿区外围地面物探工作难度大、勘探周期长等不利因素,探讨了利用直升机快速获取高分辨率航空物探资料的方法。以成功应用实例,总结了直升机航空物探方法技术的特点和优势,并针对目前深部找矿工作区的部署特点,展望了直升机物探利用磁、电、能谱综合信息,挖掘矿山深部及外围资源潜力,直接为地质找矿服务的应用前景。  相似文献   

充分利用生产坑道排水资料预测矿坑涌水量   总被引：1，自引：0，他引：1  

邓安云  张兴恒  任玉芬  吕永增 《云南地质》2008,27(2):239-244

利用生产坑道排水资料,选择比拟法、曲线方程法,对黄家山矿区进行矿坑涌水量预测,取得较好效果,对相邻类似矿区有指导意义。  相似文献   

北祁连中段浪力克—牛头山一带地球化学特征          下载免费PDF全文

杨文敏  张本旗  张铖 《甘肃地质》2008,(2):35-39

近年来,部署在重要成矿区带的1：5万区域矿产调查在全国陆续展开,这对提高地质矿产研究程度,进一步圈定找矿靶区具有重要意义。其中要求进行1：5万水系沉积物测量、高精度地面磁测、自然重砂测量和遥感异常提取。本文以甘青交界的浪力克一牛头山一带1：5万区域矿产调查中水系沉积物测量实际资料为依据,探讨了浪力克铜矿区及其区域地球化学特征,认为Cu、Pb、Zn、Au、Ag异常分布与含铜火山岩系分布一致,异常规模显示该矿外围仍具有较大的找矿潜力。  相似文献