试论质量体系有效性的保持     

付殿东  陈之中  滕磊 《地理信息世界》2001,(1)

提出了保持质量体系有效运行的前提和基础 ,关键和保证措施 ,并指出了组织企业保持质量体系持续有效的方法和途径。  相似文献   

ARGO剖面浮标数据质量控制过程剖析   总被引：12，自引：4，他引：12  

童明荣  刘增宏  孙朝辉  朱伯康  许建平 《海洋技术学报》2003,22(4):79-84

ARGO计划的观测目标是能取得精度分别为0．5℃和0．01PSU的海水温度和盐度资料。然而，由于目前海水盐度是采用海水电导率间接导出的，而测量海水电导率的传感器很容易产生偏差。因此，必须对获得的ARGO数据进行质量控制。文章详细介绍了ARGO剖面浮标资料实时质量控制模式和延时质量控制模式及其采用的质量控制方法等。  相似文献   

参考数据集对Argo剖面浮标盐度观测资料校正的影响   总被引：4，自引：0，他引：4  

刘增宏  许建平  修义瑞  孙朝辉 《海洋预报》2006,23(4):1-12

国际Argo计划采用新颖的Argo剖面浮标来监测全球大洋中上层的变化,对浮标盐度观测资料进行质量控制是非常重要的。本文采用历史水文观测资料集得到的温-盐度(-S)关系,并利用Wong等人开发的WJO延时模式盐度校正方法,对电导率传感器出现漂移、偏移等故障的Argo剖面浮标盐度资料进行校正。对影响校正结果的历史水文资料集(或参考数据集)的选取进行了初步研究,并在不同的海区进行试验。结果表明,选取合适的参考数据集可以提高盐度校正的精度。  相似文献   

GPS网络RTK的质量控制   总被引：2，自引：2，他引：0  

勾平 《北京测绘》2008,(2):32-34

随着科技的发展与工程应用的深入,传统RTK技术的不足也逐渐体现出来。网络RTK的出现克服了它的局限性。本文简要介绍了网络RTK的概念、工作原理、误差来源与平差、质量控制方法。  相似文献   

以铜山测区为例谈大比例尺航测数字化成图质量控制          下载免费PDF全文

马忠卫  杨礼平  何朝津 《江苏地质》2008,32(4):305-307

为了适应城市发展的需要,全数字摄影测量系统获取城市基础地理信息是目前大比例尺城市测绘的主要手段,如何保证航测法获取基础测绘数字产品的质量尤为重要。结合生产实践,阐明了进行大比例尺航测数字化地形图生产的质量控制及质量检查中应注意的细节问题。  相似文献   

工程项目质量策划的理解与应用     

杨辉 《中国勘察设计》2008,(3):80-82

本文介绍了项目质量管理的特点及构成要素,重点阐述了项目质量管理在施工企业应用的措施,以保证产品质量,为企业创出更高的效益。  相似文献   

The petroleum generation potential and effective oil window of humic coals related to coal composition and age   总被引：1，自引：0，他引：1  

Henrik I. Petersen   《International Journal of Coal Geology》2006,67(4):221-248

A worldwide data set of more than 500 humic coals from the major coal-forming geological periods has been used to analyse the evolution in the remaining (Hydrogen Index, HI) and total (Quality Index, QI) generation potentials with increasing thermal maturity and the ‘effective oil window’ (‘oil expulsion window’). All samples describe HI and QI bands that are broad at low maturities and that gradually narrow with increasing maturity. The oil generation potential is completely exhausted at a vitrinite reflectance of 2.0–2.2%R_o or T_max of 500–510 °C. The initial large variation in the generation potential is related to the original depositional conditions, particularly the degree of marine influence and the formation of hydrogen-enriched vitrinite, as suggested by increased sulphur and hydrogen contents. During initial thermal maturation the HI increases to a maximum value, HI_max. Similarly, QI increases to a maximum value, QI_max. This increase in HI and QI is related to the formation of an additional generation potential in the coal structure. The decline in QI with further maturation is indicating onset of initial oil expulsion, which precedes efficient expulsion. Liquid petroleum generation from humic coals is thus a complex, three-phase process: (i) onset of petroleum generation, (ii) petroleum build-up in the coal, and (iii) initial oil expulsion followed by efficient oil expulsion (corresponding to the effective oil window). Efficient oil expulsion is indicated by a decline in the Bitumen Index (BI) when plotted against vitrinite reflectance or T_max. This means that in humic coals the vitrinite reflectance or T_max values at which onset of petroleum generation occurs cannot be used to establish the start of the effective oil window. The start of the effective oil window occurs within the vitrinite reflectance range 0.85–1.05%R_o or T_max range 440–455 °C and the oil window extends to 1.5–2.0%R_o or 470–510 °C. For general use, an effective oil window is proposed to occur from 0.85 to 1.7%R_o or from 440 to 490 °C. Specific ranges for HI_max and the effective oil window can be defined for Cenozoic, Jurassic, Permian, and Carboniferous coals. Cenozoic coals reach the highest HI_max values (220–370 mg HC/g TOC), and for the most oil-prone Cenozoic coals the effective oil window may possibly range from 0.65 to 2.0%R_o or 430 to 510 °C. In contrast, the most oil-prone Jurassic, Permian and Carboniferous coals reach the expulsion threshold at a vitrinite reflectance of 0.85–0.9%R_o or T_max of 440–445 °C.  相似文献   

科技期刊发展的挑战与机遇   总被引：3，自引：0，他引：3  

薛宏交 《山西地震》2002,(3):43-45

中国加入世贸组织后 ,面对开放的世界性大市场的直接冲击 ,我国出版发行行业的竞争必将更加激烈。优胜劣汰 ,会直接考验每个出版社、每份期刊。为了使我国的期刊在竞争中成为胜者 ,探讨了科技期刊参与竞争的困难与优势 ,提出了如何提高我国科技期刊竞争力的粗浅看法  相似文献   

Determining Q of near-surface materials from Rayleigh waves     

Jianghai Xia  Richard D. Miller  Choon B. Park  Gang Tian 《Journal of Applied Geophysics》2002,51(2-4)

High-frequency (≥2 Hz) Rayleigh wave phase velocities can be inverted to shear (S)-wave velocities for a layered earth model up to 30 m below the ground surface in many settings. Given S-wave velocity (V_S), compressional (P)-wave velocity (V_P), and Rayleigh wave phase velocities, it is feasible to solve for P-wave quality factor Q_P and S-wave quality factor Q_S in a layered earth model by inverting Rayleigh wave attenuation coefficients. Model results demonstrate the plausibility of inverting Q_S from Rayleigh wave attenuation coefficients. Contributions to the Rayleigh wave attenuation coefficients from Q_P cannot be ignored when Vs/V_P reaches 0.45, which is not uncommon in near-surface settings. It is possible to invert Q_P from Rayleigh wave attenuation coefficients in some geological setting, a concept that differs from the common perception that Rayleigh wave attenuation coefficients are always far less sensitive to Q_P than to Q_S. Sixty-channel surface wave data were acquired in an Arizona desert. For a 10-layer model with a thickness of over 20 m, the data were first inverted to obtain S-wave velocities by the multichannel analysis of surface waves (MASW) method and then quality factors were determined by inverting attenuation coefficients.  相似文献   

双多普勒雷达风场反演误差和资料的质量控制   总被引：15，自引：12，他引：15       下载免费PDF全文

刘黎平  张沛源  梁海河  牛昉  周海光 《应用气象学报》2003,14(1):17-29

提出了用双多普勒雷达观测资料进行回波强度、径向速度和方位定位的质量控制方法，以及利用概率分布法订正配对的双多普勒雷达回波强度的方法。以2001年973“中国暴雨”外场试验期间获取的双多普勒雷达观测资料为例，比较了合肥、马鞍山和宜昌、荆州的两对双多普勒雷达同步观测的回波强度、径向速度和方位的改变对观测数据对比的影响；分析了这两对双多普勒雷达径向速度测量误差引起的风场反演的误差。结果表明:两对双多普勒雷达观测的回波强度和径向速度的空间位置和变化趋势比较一致，合肥与马鞍山雷达的回波强度有一定差异，径向速度也有1～2 m/s的差异。风场反演的误差与风场的方向、大小、空间位置等有关。在两个径向速度夹角在40°～140°范围内，共面上的风场的反演误差在1～2倍的雷达探测径向速度的误差范围内。  相似文献