Pressure prediction in the Bullwinkle Basin through petrophysics and flow modeling (Green Canyon 65, Gulf of Mexico)     

P.B. Flemings  J.A. Lupa   《Marine and Petroleum Geology》2004,21(10):1311-1322

Reservoir pressures within the Bullwinkle minibasin (Green Canyon 65, Gulf of Mexico continental slope) increase at a hydrostatic gradient whereas pressures predicted from porosity within mudstones bounding these reservoirs increase at a lithostatic gradient: they are equal at a depth 1/3 of the way down from the crest of the structure. Two- and three-dimensional steady-state flow models demonstrate that bowl-shaped structures will have lower pressures than equivalent two-dimensional structures and that if a low permeability salt layer underlies the basin, the pressure is reduced. We conclude that at Bullwinkle, pressure is reduced due to an underlying salt body and the bowl-shape of the basin. A geometric approach to predict sandstone pressure is to assume that the reservoir pressure equals the area-weighted average of the mudstone pressure. When the mudstone pressure gradient is constant, as at Bullwinkle, the reservoir pressure equals the mudstone pressure at the average depth (centroid) of the reservoir.  相似文献   

A conceptual design of an underwater vehicle     

Carl T.F. Ross 《Ocean Engineering》2006,33(16):2087-2104

The paper presents a conceptual design of an underwater star wars’ system, which will be more difficult to detect by the enemy than a recently proposed ‘surface’ star wars’ system.The paper suggests that for the proposed structures needed for the underwater star wars’ system, the material of construction should be a composite and not a metal, as use of the latter for large deep diving underwater vessels will result in such structures sinking to the bottom of the ocean like stones, due to the fact that they will have no reserve buoyancy. The paper also shows that composites have better sound absorption characteristics, thereby making the underwater structures difficult to detect through sonar equipment. It is proposed that these underwater structures should operate up to a depth of 7.16 miles (11.52 km), as at this depth, all of the oceans’ bottoms can be reached.The author shows that current technology can be used to construct and operate such vessels, but more progress needs to be made with metal matrix and ceramic composites, so that the hulls of underwater missiles and torpedoes can be constructed in these materials.  相似文献   

0515台风"卡努"影响浙江的强风分析   总被引：1，自引：0，他引：1  

曾欣欣  吕静  沈翊 《海洋预报》2006,23(4):13-20

本文对0515台风“卡努”登陆浙江后,强度减弱为强热带风暴,对影响浙江沿海海面及沿海地区的外围风速远强于近风暴中心风速进行了分析,分析结果表明:副热带高压的加强、对流层中下层急流的动量下传、高空较强的下沉气流和台风外围气压梯度力迅猛增大的共同作用,是造成本次风暴外围风速远强于近风暴中心风速的重要原因。  相似文献   

Optimum design of filament-wound multilayer-sandwich submersible pressure hulls     

Cho-Chung Liang  Hung-Wen Chen  Chan-Yung Jen 《Ocean Engineering》2003,30(15):1941-1967

Submersible pressure hulls with fiber-reinforced multilayer-sandwich constructions have been developed in recent years as substitutes for classical metallic ring-stiffened pressure hulls. This study aims to optimize the design of filament-wound multilayer-sandwich submersible pressure hulls, taking into consideration the shell buckling strength constraint, the angle-ply laminated facing failure strength constraint and the low-density isotropic core yielding strength constraint under hydrostatic pressure using the hybrid genetic algorithm (HGA). The thickness of the facing, the thickness of the core layer, the orientation angle of the fibers in the facings and the shear modulus of the core material are taken as design variables. A sensitivity analysis is performed to study the effects of the operational depths and the hull shell geometry parameter, the length-to-diameter ratio (L/D), on the optimal design of filament-wound multilayer-sandwich submersible pressure hulls with graphite/epoxy, glass/epoxy and boron/epoxy composite facings. The results reveal that the optimal weight of various sandwich pressure hulls increases linearly with the operational depth, but it is almost unchanged as the geometry paramter. Furthermore, Graphite/Epoxy is the best choice for the material of the facings in a light-weight design. With reference to wall design, Boron/Epoxy is the best choice for the material of the facing at shallow depths, but Graphite/Epoxy is the best choice at extreme depths. Results of this study provide a valuable reference for designers of underwater vehicles.  相似文献   

西太平洋暖池区气象学特征分析   总被引：1，自引：0，他引：1  

吴增茂  张庆荣 《海洋湖沼通报》1994,(2):113-119

本文根据ＴＯＧＡ－ＣＯＡＲＥ强化观测资料及卫星资料分析讨论了西太平洋暖池区１１－２月间海面气象要素的平均特征。分析发现海面气压平均日变化似乎同中纬度区明显不同。文中还分析讨论了在西太暖池区西风爆发、赤道浅涡、信风逆温及ＩＴＣＥ和南太平洋辐合带ＳＰＣＺ的变化特征。  相似文献   

Hydrodynamic forces on partly buried tandem, twin pipelines in current     

Sevket Cokgor  Ilhan Avci 《Ocean Engineering》2001,28(10):476

This study extends the investigations of the forces on a cylinder, laid on, or partly buried in the bed with a parallel twin dummy cylinder nearby and without it, and were determined by measuring the pressure distribution on the cylinder in the case of a steady current. The pressure distribution around the cylinder was measured by using pressure transducers. The forces on the cylinder were calculated by the integration of the measured pressures on the surface of the cylinder. Force coefficients were obtained for the ranges of Re=0.8×10⁴–1.5×10⁴ for the burial depth to diameter RATIO=0:0.7. The distance between axis of the measurement and dummy cylinders to diameter ratio (x/D) was 2, 1.5 and 1. The dummy cylinder was replaced downstream and upstream of the measurement cylinder.  相似文献   

Modeling the cyclic swelling pressure of mudrock using artificial neural networks     

M. Moosavi  M.J. Yazdanpanah  R. Doostmohammadi 《Engineering Geology》2006,87(3-4):178-194

The stochastic nature of the cyclic swelling behavior of mudrock and its dependence on a large number of interdependent parameters was modeled using Time Delay Neural Networks (TDNNs). This method has facilitated predicting cyclic swelling pressure with an acceptable level of accuracy where developing a general mathematical model is almost impossible. A number of total pressure cells between shotcrete and concrete walls of the powerhouse cavern at Masjed–Soleiman Hydroelectric Powerhouse Project, South of Iran, where mudrock outcrops, confirmed a cyclic swelling pressure on the lining since 1999. In several locations, small cracks are generated which has raised doubts about long term stability of the powerhouse structure. This necessitated a study for predicting future swelling pressure. Considering the complexity of the interdependent parameters in this problem, TDNNs proved to be a powerful tool. The results of this modeling are presented in this paper.  相似文献   

软土地基上静压预制桩承载力的工后增大效应     

肖军华  韩爱民 《江苏地质》2003,27(4):233-236

分析了软土地基上预制桩承载力的时效性机理，介绍了几种研究承载力时效性的经验回归公式，结合工程说明应充分认识承载力时效性的科学性和利用这种规律潜在的巨大经济效益。  相似文献   

强震前大气层中温压相关特征的异常显示     

张慧  张苏平 《高原地震》1997,(3)

对中国大陆已发生的多次7级以上强震震中区气温、气压资料进行了研究，结果表明：在大震前（30天之内），气温－气压函数的平衡状态被破坏，其相关系数（代数值）不断增大，“正弓”形可作为短临异常的标志，同时对其成因也进行了初步探讨。  相似文献   

高粘性牛顿流体粘性耗散的快速计算方法          下载免费PDF全文

陈建军  任彦蓉 《盐湖研究》1997,5(1):76-80

螺旋泵可用来输送高粘性液体，该过程中由于液体的温度升高而粘度降低，因而其粘性耗散不能忽略。本文介绍一种上述情况下计算液体粘度、泵的功率和压力降的近似公式。  相似文献