排序方式： 共有22条查询结果，搜索用时 15 毫秒
1.
水力压裂是开采地下页岩气资源的有效技术手段,探究页岩水力压裂裂缝的扩展规律,可为页岩气的高效开采提供科学的指导依据。通过运用大型有限元软件ABAQUS中的扩展有限元模块,针对不同地应力差工况条件下均质页岩中初始裂缝的位置、方位角、数量和含层理页岩中层理的构造方向、内部倾角、岩性对水力裂缝扩展的影响进行探究。结果表明：对于垂向扩展的水力裂缝,水平主应力增大使裂缝更不易扩展,裂缝扩展长度减小、起裂压力增大;在注液体积流量相同时,向初始裂缝两端同时起裂所形成的水力裂缝长度大于仅向一侧起裂;当初始裂缝处于页岩中部且呈45°方向时,裂缝会向最大水平主应力方向偏转,且偏转程度随最大水平主应力的增大而增大;分时多簇压裂时,裂缝间的扩展会相互干扰,且会较大地影响裂缝扩展的形态和起裂压力,但对裂缝注液点裂缝宽度的影响较小;对于含水平和竖直构造层理的页岩,改变层理内部倾角,水力裂缝会出现不同程度偏转,且其偏转程度随着层理内部倾角的增大而减小;对于含45°方向构造层理的页岩,水力裂缝在层理分别为砂岩、煤岩和泥岩中的偏转程度依次增大,且裂缝偏移比随着最大水平主应力的增大而增大。 相似文献
2.
扩展有限元法模拟裂纹时独立于网格,因此该方法是目前求解裂纹问题最有效的数值方法。为了在计算代价不大的情况,实现大型结构分析中考虑小裂纹或提高裂纹附近精度,在裂纹附近一般采用小尺度单元,其他区域采用大尺度单元。提出了分析三维裂纹问题的多尺度扩展有限元法,在需要的地方采用小尺度单元。基于点插值构造了六面体任意节点单元。所有尺度单元都采用8节点六面体单元,这样六面体任意节点单元可方便有效地连接不同尺度单元。采用互作用积分法计算三维应力强度因子。边裂纹和中心圆裂纹算例分析结果表明,该方法是正确和有效的。 相似文献
3.
基于断裂力学的岩爆破坏形迹两级预测方法研究 总被引：3，自引：0，他引：3
根据常规的岩爆判据,可以确定岩爆的大致分布区域,但难以得到岩爆的破坏形迹（Damaged Shape of Rockburst,DSR）,为此根据岩爆的特点,推导了裂纹失稳扩展的临界长度和临界应力条件,提出了计算DSR的两级预测方法：通过裂纹失稳扩展时的临界应力,对DSR进行一级预测;在一级预测的DSR范围内加入预设裂纹,进行DSR的二级预测。针对断裂数值模拟方法的缺点,建立了基于扩展有限元（XFEM）模拟裂纹动态扩展的思路,依托ABAQUS平台,建立了XFEM二次开发的分析框架,编制了扩展有限元分析程序,进行了相关的实例验证;结合依托工程嘎隆拉隧道,从岩爆的机制、裂纹的数值仿真等方面开展研究,研究成果对高地应力地下工程的岩爆预测具有一定的参考意义。 相似文献
4.
This paper describes a particular formulation of the extended finite element method (XFEM) specifically conceived for application to existing discontinuities of fixed location, for instance, in geological media. The formulation is based on two nonstandard assumptions: (1) the use of sub-interpolation functions for each subdomain and (2) the use of fictitious displacement variables on the nodes across the discontinuity (instead of the more traditional jump variables). Thanks to the first of those assumptions, the proposed XFEM formulation may be shown to be equivalent to the standard finite element method with zero-thickness interface elements for the discontinuities (FEM+z). The said equivalence is theoretically proven for the case of quadrangular elements cut in two quadrangles by the discontinuity, and only approximate for other types of intersections of quadrangular or triangular elements, in which the XFEM formulation corresponds to a kinematically restricted version of the corresponding interface plus continuum scheme. The proposed XFEM formulation with sub-interpolation, also helps improving spurious oscillations of the results obtained with natural interpolation functions when the discontinuity runs skew to the mesh. A possible explanation for these oscillations is provided, which also explains the improvement observed with sub-interpolation. The paper also discusses the oscillations observed in the numerical results when some nodes are too close to the discontinuity and proposes the remedy of moving those nodes onto the discontinuity itself. All the aspects discussed are illustrated with some examples of application, the results of which are compared with closed-form analytical solutions or to existing XFEM results from the literature. 相似文献
5.
In this paper, the problem of propagation of localized deformation associated with formation of macrocracks/shear bands is studied in both tensile and compressive regimes. The main focus here is on enhancement of the constitutive law with embedded discontinuity to provide a discrete representation of the localization phenomenon. This has been accomplished by revising the formulation and coupling it with the level‐set method for tracing the propagation path. Extensive numerical studies are conducted involving various fracture modes, ranging from brittle to frictional, and the results are compared with the experimental data as well as those obtained using XFEM methodology. Copyright © 2015 John Wiley & Sons, Ltd. 相似文献
6.
Modelling of coupled fluid‐mechanical problems in fractured geological media using enriched finite elements 
下载免费PDF全文
下载免费PDF全文 Jose Roberto Silvestre Euripedes do Amaral Vargas Jr. Luiz Eloy Vaz Antonio Claudio Soares 《国际地质力学数值与分析法杂志》2015,39(10):1104-1140
Geological environments, such as petroleum reservoirs, normally exhibit physical discontinuities, for example, fractures and faults. Because of the reduced thickness of these discontinuities, finite element formulations with strong discontinuity have been applied to the numerical modelling of geological environments. Until now, two relevant characteristics of petroleum reservoirs have not been addressed by these formulations. The first is the pore pressure jump in the direction normal to a discontinuity in a fluid‐mechanical coupling condition, which is present primarily in sealing faults owing to the contrast of permeability with the porous medium. The absence of this jump can affect the prediction of the deformability of a physical discontinuity. Furthermore, reservoir models frequently use coarse meshes. Thus, the method used to evaluate the pore pressure in the discontinuity may exhibit a strong dependence relative to the mesh refinement. Based on these characteristics, in this study, a formulation of an enriched finite element for application to coupled fluid‐mechanical problems with pre‐existing physical discontinuities saturated by a single fluid is presented. The formulation employs discontinuous interpolation functions and enables the reproduction of jumps of displacement and pore pressure associated with a discontinuity inside the element without the need to discretise it. An approximation to estimate the pore pressure in the discontinuity was developed, one which seeks to minimise the influence of refinement. The element's response is verified by comparison with a one‐dimensional analytical solution and simple examples that are simulated using commercial software. Copyright © 2015 John Wiley & Sons, Ltd. 相似文献
7.
Numerical modeling of hydraulic fracture propagation,closure and reopening using XFEM with application to in‐situ stress estimation 下载免费PDF全文
下载免费PDF全文 In this paper, a fully coupled model is developed for numerical modeling of hydraulic fracturing in partially saturated weak porous formations using the extended finite element method, which provides an effective means to simulate the coupled hydro‐mechanical processes occurring during hydraulic fracturing. The developed model is for short fractures where plane strain assumptions are valid. The propagation of the hydraulic fracture is governed by the cohesive crack model, which accounts for crack closure and reopening. The developed model allows for fluid flow within the open part of the crack and crack face contact resulting from fracture closure. To prevent the unphysical crack face interpenetration during the closing mode, the crack face contact or self‐contact condition is enforced using the penalty method. Along the open part of the crack, the leakage flux through the crack faces is obtained directly as a part of the solution without introducing any simplifying assumption. If the crack undergoes the closing mode, zero leakage flux condition is imposed along the contact zone. An application of the developed model is shown in numerical modeling of pump‐in/shut‐in test. It is illustrated that the developed model is able to capture the salient features bottomhole pressure/time records exhibit and can extract the confining stress perpendicular to the direction of the hydraulic fracture propagation from the fracture closure pressure. Copyright © 2016 John Wiley & Sons, Ltd. 相似文献
8.
We propose a novel computational method for the efficient simulation of two-phase flow in fractured porous media. Instead of refining the grid to capture the flow along the faults or fractures, we represent the latter as immersed interfaces, using a reduced model for the flow and suitable coupling conditions. We allow for non matching grids between the porous matrix and the fractures to increase the flexibility of the method in realistic cases. We employ the extended finite element method for the Darcy problem and a finite volume method that is able to handle cut cells and matrix-fracture interactions for the saturation equation. Moreover, we address through numerical experiments the problem of the choice of a suitable numerical flux in the case of a discontinuous flux function at the interface between the fracture and the porous matrix. A wrong approximate solution of the Riemann problem can yield unphysical solutions even in simple cases. 相似文献
9.
在处理含有裂隙这类不连续问题时,常规有限元方法需要对裂隙尖端部位进行局部网格加密,当裂隙扩展时还需要进行网络重构。基于单位分解思想的扩展有限元成功解决了常规有限元难以处理的裂隙类不连续问题。在研究复合裂隙时,通常需要考虑裂隙的接触问题。基于互补理论,建立了裂隙面上相对位移和接触力的互补方程,并采用牛顿法求解,无需开闭迭代,且能够快速收敛。最后,对含裂隙平板进行受压数值试验,计算结果表明,基于互补理论的扩展有限元接触算法能够有效地阻止裂隙两端网格的相互嵌入,且获得裂隙面上的应力分布与实际一致。 相似文献
10.
In this paper, a numerical model is developed for the fully coupled hydro‐mechanical analysis of deformable, progressively fracturing porous media interacting with the flow of two immiscible, compressible wetting and non‐wetting pore fluids, in which the coupling between various processes is taken into account. The governing equations involving the coupled solid skeleton deformation and two‐phase fluid flow in partially saturated porous media including cohesive cracks are derived within the framework of the generalized Biot theory. The fluid flow within the crack is simulated using the Darcy law in which the permeability variation with porosity because of the cracking of the solid skeleton is accounted. The cohesive crack model is integrated into the numerical modeling by means of which the nonlinear fracture processes occurring along the fracture process zone are simulated. The solid phase displacement, the wetting phase pressure and the capillary pressure are taken as the primary variables of the three‐phase formulation. The other variables are incorporated into the model via the experimentally determined functions, which specify the relationship between the hydraulic properties of the fracturing porous medium, that is saturation, permeability and capillary pressure. The spatial discretization is implemented by employing the extended finite element method, and the time domain discretization is performed using the generalized Newmark scheme to derive the final system of fully coupled nonlinear equations of the hydro‐mechanical problem. It is illustrated that by allowing for the interaction between various processes, that is the solid skeleton deformation, the wetting and the non‐wetting pore fluid flow and the cohesive crack propagation, the effect of the presence of the geomechanical discontinuity can be completely captured. Copyright © 2012 John Wiley & Sons, Ltd. 相似文献