Explicit stress–strain equations for modeling frictional materials     

Kenneth J. Xu  Martin D. Liu  Buddhima Indraratna 《Marine Georesources & Geotechnology》2018,36(6):722-734

In this paper, a comprehensive study on simulating the shearing behavior of frictional materials is performed. A set of two explicit equations, describing the relationship among the shear stress ratio and the distortional strain and the volumetric strain, are formulated independently. The equations contain three stress parameters and three strain parameters and another parameter representing the nonuniformity of stress and strain during softening. All the parameters have clear physical significance and can be determined experimentally. It is demonstrated that the proposed equations have the capacity of simulating the complicated shearing behavior of many types of frictional materials including geomaterials. The proposed equations are used to simulate the stress–strain behavior for 27 frictional materials with 98 tests. These materials include soft and stiff clays in both reconstituted and structured states, silicon sands and calcareous sands, silts, compacted fill materials, volcanic soils, decomposed granite soils, cemented soils (both artificially and naturally cemented), partially saturated soils, ballast, rocks, reinforced soils, tire chips, sugar, wheat, and rapeseed. It has been demonstrated that the proposed explicit constitutive equations have the capacity to capture accurately the shearing behavior of frictional materials both qualitatively and quantitatively. A study on model parameters has been performed.  相似文献   

基于组合权重与灰色关联度分析法的地铁深基坑开挖稳定性评价     

郎秋玲  王伟  高成梁 《吉林大学学报(地球科学版)》2020,50(6):1823-1832

伴随着城市的快速发展，地铁深基坑工程越来越多。在开挖过程中如何对其稳定性进行评价，是当前需要重点关注的问题。以成都地铁十七号线凤溪站深基坑支护开挖工程为依托，利用层次分析确定的主观权重与利用熵值法确定的客观权重计算获得组合权重，并与灰色关联度分析法相结合，通过现场数据采集并进行综合评判，客观评价地铁深基坑开挖的稳定性。结果表明，各监测项目对基坑稳定性的重要程度从大到小依次为桩顶水平位移（0.29）、地表沉降（0.24）、建筑物沉降（0.19）、桩顶沉降（0.18）、内支撑轴力（0.10），基坑稳定性综合评判结果等级为"非常好"。所建立的评价模型可为类似地铁深基坑开挖稳定性评价提供新的方法。  相似文献   

湖南常德南斗姆湖地区早更新世砾石层砾组分析与沉积特征研究   总被引：1，自引：1，他引：0  

刘庚寅  赵伟  魏方辉  罗来  赵睿成  梁恩云 《中国地质调查》2019,6(2):68-75

为了查明洞庭盆地西缘早更新世砾石层沉积特征及沉积环境,在1:5万地质调查基础上,对常德南斗姆湖地区几处第四系砾石层剖面进行了较系统的测量与统计。结果表明: 砾石成分主要来源于寒武纪或前寒武纪地层。砾石分选系数S_a 为1.16~1.64,部分测点S_a>1.40,反映砾石形成时水动力很强,部分砾石层为快速堆积。砾石扁度F为2.06~2.32,大于2.0,砾石以扁平状为主。砾石普遍弱—中等风化,部分砾石强风化,反映砾石在沉积搬运过程中存在风化暴露。砾向分析显示古水流主要来源于SWW—NW向,表明砾石层形成时期古地貌与现有地貌有较大差异。剖面对比得出,区内砾石层是在冲洪积扇基础上发育的以辫状河相为主的沉积体。对研究区砾石层沉积相及古地貌的新认识,为区内金刚石原生矿床的找矿工作提供支撑。  相似文献   

砾钢渣抗液化特性试验研究   总被引：1，自引：0，他引：1  

王丽艳  巩文雪  曹晓婷  姜朋明  王炳辉 《岩土力学》2019,40(10):3741-3750

陈化的钢渣作为土工回填材料是废弃钢渣循环利用的主要途径之一。按土的工程分类方法，将废弃钢渣划分为砾钢渣、粗钢渣和细钢渣。针对砾钢渣，考虑固结应力比、振动频率、围压和含砾量等影响因素开展动三轴试验研究。分析了砾钢渣的应力、应变和动孔隙水压力的特性，分析了砾钢渣试样的动强度与振动次数、动应变与振动次数、孔隙水压力与振动次数和动应力与动应变关系。采用Seed和Finn提出的饱和砂土动孔压计算模型分析砾钢渣的动孔压曲线类型，并与传统砂砾土的抗液化强度进行比较。得出砾钢渣的抗液化特性较好，工程中可以用砾钢渣替代传统的砂土、砂砾土、砂砾料和砂卵石作为回填料，解决砂砾资源日渐短缺的问题。  相似文献   

提高地浸钻孔出水量的有效技术措施          下载免费PDF全文

胥虹 《探矿工程》2020,47(1):48-52

地浸钻孔是一种以采矿为目的的钻孔，提高钻孔出水量就是提高钻孔的采矿量。通过对多年地浸钻孔施工经验和理论进行分析，发现影响钻孔出水量的主要因素为钻井泥浆的成分和性能以及人工过滤层的渗透性差异，提出在地浸钻孔施工方案中采用植物胶净化泥浆钻进和扩孔、投砾罐射吸式填砾、物理化学组合洗井3种技术措施，对比前后施工钻孔的出水量大小，证明了该技术措施对提高地浸钻孔出水量具有良好的效果。  相似文献   

Impact of channel bar form and grain size variability on estimated stranding risk of juvenile brown trout during hydropeaking          下载免费PDF全文

Christoph Hauer  Günther Unfer  Patrick Holzapfel  Marlene Haimann  Helmut Habersack 《地球表面变化过程与地形》2014,39(12):1622-1641

Hydropeaking leads to artificial fluctuations in discharge and corresponding water levels with pronounced dewatering areas between base and peak flow along gravel bars and channel banks. In the present study, 16 hydropeaking reaches in Austria were investigated to assess possible differences in the estimated stranding risk for young of the year brown trout according to different gravel bar types and differences in microtopography roughness. Based on hydrodynamic‐numerical modelling, a predictive habitat modelling approach was implemented in the study design. Accompanied by grain size sampling along the various channel bars, a conceptual stranding risk model (SRM) was developed. The results showed that a high variability in estimated stranding risk exists for the tested sites considering discharge ratios of 1:3, 1:5 and 1:10. With respect to the discussion of establishing legal thresholds for ramping ratios in discharge, it was documented that, exemplarily, a discharge ratio base flow/peak flow of 1:5 (winter base flow conditions) could cause minor differences in the spatial extent of dewatering areas and the related estimated stranding risk for juvenile brown trout compared to a ratio of 1:2 for summer base flow conditions. Microtopographic roughness was addressed due to sampling and analysis of grain size distributions. Statistical testing of grain size distributions revealed significant differences between the surface material compositions of the investigated gravel bars. Those differences are evident, particularly for the coarser fraction (d₉₀), which is important as cover for young of the year brown trout. These aspects of grain size in habitat use and hydraulics have been addressed in the conceptual SRM. The results showed that point bar morphology, in particular, was less sensitive to the risk of stranding compared to, for example, alternating gravel bars. Considering the multiple pressures for alpine rivers, the improvement of structural features due to bar formation and related self‐forming processes is discussed as a possible alternative for future mitigation measures to reduce the negative impacts of hydropeaking. Copyright © 2014 John Wiley & Sons, Ltd.  相似文献   

Sensitivity of interfacial hydraulics to the microtopographic roughness of water‐lain gravels          下载免费PDF全文

Stephen P. Rice  Thomas Buffin‐Bélanger  Ian Reid 《地球表面变化过程与地形》2014,39(2):184-199

Flow within the interfacial layer of gravel‐bed rivers is poorly understood, but this zone is important because the hydraulics here transport sediment, generate flow structures and interact with benthic organisms. We hypothesized that different gravel‐bed microtopographies generate measurable differences in hydraulic characteristics within the interfacial layer. This was tested using a high density of spatially and vertically distributed, velocity time series measured in the interfacial layers above three surfaces of contrasting microtopography. These surfaces had natural water‐worked textures, captured in the field using a casting procedure. Analysis was repeated for three discharges, with Reynolds numbers between 165000 and 287000, to evaluate whether discharge affected the impact of microtopography on interfacial flows. Relative submergence varied over a small range (3.5 to 8.1) characteristic of upland gravel‐bed rivers. Between‐surface differences in the median and variance of several time‐averaged and turbulent flow parameters were tested using non‐parametric statistics. Across all discharges, microtopographic differences did not affect spatially averaged (median) values of streamwise velocity, but were associated with significant differences in its spatial variance, and did affect spatially averaged (median) turbulent kinetic energy. Sweep and ejection events dominated the interfacial region above all surfaces at all flows, but there was a microtopographic effect, with Q2 and Q4 events less dominant and structures less persistent above the surface with the widest relief distribution, especially at the highest Reynolds number flow. Results are broadly consistent with earlier work, although this analysis is unique because of the focus on interfacial hydraulics, spatially averaged ‘patch scale’ metrics and a statistical approach to data analysis. An important implication is that observable differences in microtopography do not necessarily produce differences in interfacial hydraulics. An important observation is that appropriate roughness parameterizations for gravel‐bed rivers remain elusive, partly because the relative contributions to flow resistance of different aspects of bed microtopography are poorly constrained. © 2014 The Authors. Earth Surface Processes and Landforms Published by John Wiley & Sons Ltd.  相似文献   

粗砂砾石地层中高压旋喷桩隔水帷幕施工技术          下载免费PDF全文

张红涛 《探矿工程》2021,48(6):113-117

太原万达广场A2区商住楼基坑工程部分区域为粗砂砾石地层,基坑隔水帷幕中深层搅拌桩无法有效使用。提出了在粗砂砾石地层采用高压旋喷桩隔水帷幕的施工技术方案,采用双套管锚杆钻机引孔、单管高压喷射工艺进行施工,成功实施了这一工程。经检查,喷射注浆体相互咬合良好,有效桩径内水泥含量均匀无夹块现象,隔水帷幕止水效果良好。  相似文献   

基于水热耦合的青藏高原分布式水文模型——Ⅱ.考虑冰川和冻土的尼洋河流域水循环过程模拟          下载免费PDF全文

刘扬李  周祖昊  刘佳嘉  王鹏翔  李玉庆  朱熠明  姜欣彤  王康  王富强 《水科学进展》2021,32(2):201-210

尼洋河流域是雅鲁藏布江第四大支流,受冰川、积雪和冻土影响,水循环关系极其复杂。为深入研究该区域内的水文循环过程,本文在寒区水循环模型（WEP-COR）的基础上,针对青藏高原气候和地质特点,构建了耦合“积雪-土壤-砂砾石层”连续体和“积雪-冰川”水热过程模拟的青藏高原分布式水循环模型（WEP-QTP）。在尼洋河流域通过对2013—2016年的流量过程模拟发现,工布江达和泥曲站的逐月流量Nash-Sutcliffe效率系数分别达到0.810和0.752,比改进前的0.430和0.095有明显提升;以2015年为例,对比WEP-COR和WEP-QTP模型发现,WEP-QTP模型在汛期特别是主汛前（冻土融化期）模拟的流量过程不会出现较大的波动,模拟得到的逐日流量Nash-Sutcliffe效率系数相比WEP-COR从-0.67提高到0.54。模型增强了地下水含水层的调节作用,使得流量过程更加平稳且接近实测,研究结果表明,WEP-QTP模型适用于青藏高原的水文模拟。  相似文献   

Changeability of Movable Bed‐Surface Particles in Natural,Gravel‐Bed Channels and Its Relation to Bedload Grain Size Distribution (Scott River,Svalbard)          下载免费PDF全文

Waldemar Kociuba  Grzegorz Janicki 《Geografiska Annaler: Series A, Physical Geography》2015,97(3):507-521

The presented paper analyses the variability of grain size distribution parameters of bedload transported by the gravel‐bed Scott River (Svalbard) draining a glacier catchment with an area of 10 km². The grain size distribution analysis is one of the basic elements of identification of the fluvial transport mechanisms in gravel‐bed rivers. It is used for the determination of threshold values for bedload movement. It is also treated as an important indicator of the origin, routes of distribution, and conditions of transport and deposition of fluvial bedload. The field study in a natural proglacial gravel‐bed channel was carried out at two reaches in the mouth section of Scott River. The study revealed relatively high temporal variability and similar mean parameters of grain size distribution in conditions of low discharges. Bedload transport rates reached a mean of 71.9–76.0 kg d^?1 in channel cross‐section. Bedload texture was dominated by gravels with a proportional contribution of the fine‐grained fraction along with very fine‐grained gravels (8‐2 mm) of 38.8%. The medium‐grained fraction (16‐8 mm) constituted 33.7%, with a lower contribution from the coarse‐grained fraction (32‐16 mm) of 23.2%, and the very coarse‐grained fraction (64‐32 mm) of 4.4%. Two periods in the course of bedload transport and distribution of grain size distribution parameters were distinguished based on variation of hydro‐meteorological conditions. The first half of the measurement period was distinguished by significantly higher values of daily loads and increased contribution of the coarse‐grained and very coarse‐grained fraction (28–31% and 6.2–6.6%, respectively). During this time, the river discharged up to 94% of bedload. This resulted in a clear tendency for riverbed scouring. The second half was distinguished by generally low daily bedload transport rates (<10 kg d^?1), an increase in contribution of fine‐ and very fine‐grained gravels (42–55.6%), and a change in the tendency to aggradation. Grain size indices were more varied, and grains were usually finer and better sorted. Selective transport processes, often related to redeposition, were dominant in the channel. Along with an increase in flow velocity, conditions for material deposition became more variable. This was manifested in weaker sorting and an increase in grain diameter.  相似文献