动态应力触发研究进展     

陈昊  冀战波  王琼  苏金波 《中国地震》2020,36(3):442-459

本文从库仑破裂应力与动态应力触发原理、观测事实与研究现状以及存在的问题与展望等3个方面介绍了动态应力触发的研究进展。其中,在主震对余震活动、强震对后续远场地震活动、不同破裂类型的地震之间及强震对火山(泥火山)的动态应力触发作用、一次大地震中子事件之间的动态应力触发关系以及动态应力触发的时间延迟等方面进行了详细讨论。分析认为,动态应力触发理论在解释震后余震分布、远程触发以及对火山触发性喷发等方面得到了较好的结果;动态应力触发可能会受断层破裂方式和方向的影响;大地震中子事件之间的动态应力触发关系对震源研究有重要意义;动态应力触发现象普遍存在时间延迟。  相似文献   

An extended finite volume method and fixed-stress approach for modeling fluid injection–induced tensile opening in fractured reservoirs     

Rajdeep Deb  Patrick Jenny 《国际地质力学数值与分析法杂志》2020,44(8):1128-1144

Fluid injection–induced tensile opening is modeled using an extended finite volume method (XFVM). An embedded fracture strategy is used for the flow problem, that is, the fractures are discretized using finite volume segments without resolving the grid around them. Further, the discontinuities across fractures are modeled using special basis functions. The fracture openings due to enhanced fluid pressure and the associated shear slip due to traction free boundary condition on the fracture segments are both modeled using these special discontinuity basis functions. Mass transfer between fractures and matrix is modeled using the pressure difference. The enhancement of fracture storativity due to tensile opening leads to stronger coupling between flow and mechanics. An iterative scheme relying on the fixed-stress approach for fractures, which conserves the stress dependent terms over each iteration of the flow problem, has been introduced. Tensile opening has been simulated for single fractures embedded in two- and three-dimensional matrices. The convergence criterion for sequentially implicit fixed-stress scheme for fractures embedded in elastic media is established and has been validated numerically. Further, for 2D simulations, the effect of the matrix permeability for fracture propagation due to tensile opening has been studied.  相似文献   

Reliability of mooring lines and piles for a permanently manned vessel in a tropical cyclone environment     

《Applied Ocean Research》2019

The factors of safety for stationkeeping systems in current standards (ISO, API) are not derived or validated using reliability analyses. As the oil and gas exploration and production is breaking new boundaries, deploying new floating systems and moving into regions with harsher environments, it is of paramount importance to understand what level of reliability these new marine structures are achieving. This paper presents a reliability analysis of the mooring system of a Floating LNG (FLNG) vessel permanently moored and permanently manned offshore North West Australia in a tropical cyclone environment. The reliability analysis addresses both the mooring chain and the pile foundation. The analysis accounts for the long term characteristics of the environment, including the short term variability, in response to a given sea state and the variability and uncertainty in strength of the mooring chain and the pile. The stationkeeping system was analysed using detailed time domain simulations, capturing system non-linearities and low frequency oscillations as well as wave frequency responses and, thereby, reducing modelling uncertainties to a minimum.It is found that for the conditions modelled, neither the chain nor the pile meet a target reliability of 10⁻⁴/annum using the factors of safety commonly used in design following current ISO and API standards. New factors of safety are proposed to achieve this target reliability. For the pile design, one complicating factor is that current design standards do not explicitly define the exceedance probability that should be associated with the characteristic value of the undrained shear strength to be used in the design. It is demonstrated that the required factor of safety is crucially dependent on the definition of this characteristic value and on the level and the type of uncertainty in the soil strength profile. A recommendation is made regarding the definition of this characteristic value and the associated factor of safety. Furthermore, it is found that designing the mooring system to an environmental condition with a return period of 10,000 yr (as an Abnormal Limit State event), and setting the factor of safety to unity, meets the target reliability of 10⁻⁴/annum for the pile, if the characteristic undrained shear strength is a lower bound, defined in this paper by the 10th percentile value. For the chain however, this target reliability is not achieved.  相似文献   

A finite element approach for predicting the full resistance profile of a spudcan deeply penetrating in dense sand overlying clay     

《Applied Ocean Research》2019

This paper presents a finite element approach to calculate the full resistance profile of a spudcan deeply penetrating in dense sand overlying clay, in which a potential for an installing spudcan to experience a sudden uncontrolled punch-through failure exists. A modified Mohr-Coulomb model characterized by incorporating a four-phase variation of the mobilized strength and dilation parameters with an equivalent accumulated plastic strain is developed and tested for the overlying dense silica sand. An extended Tresca model is used for the strain softening of the underlying clay. A series of large deformation finite-element (LDFE) analyses are carried out, varying the strength and dilation parameters as well as the spudcan geometries. A fairly good performance of the present approach is verified by validating against groups of centrifuge tests data, allowing the numerical study to be extended parametrically. The four-phase variation of the mobilized strength and dilation parameters involved in the progressive failure of the upper dense sand is parametrically studied and extended to cover the range of sand relative densities that are of practical interest. Additionally, comparisons with the typical existing LDFE analyses using both simple and sophisticated constitutive models are carried out. It shows that the present approach performs fairly well to calculate the full resistance profile of a spudcan deeply penetration in both thin and thick dense sand overlying clay, especially the peak and post-peak resistance, within around 5% of the corresponding centrifuge tests results.  相似文献   

物化探综合信息找矿方法在萤石矿找矿中的应用     

栗克坤  陈新立  商朋强  于雪良  韩志坤  魏凡超  刘增政 《中国地质调查》2019,6(6):98-104

福建光泽地区是闽北地区重要的萤石矿成矿远景区,具有寻找隐伏—半隐伏萤石矿的潜力,但是目前该区隐伏—半隐伏萤石矿找矿成果较少。通过对福建光泽地区I号萤石矿预测区开展物化探综合信息找矿方法应用,探讨物化探综合信息找矿方法在隐伏—半隐伏萤石矿找矿中的应用效果。结果表明: 区域水系沉积物测量和大比例尺化探剖面测量圈出的F、Ca等综合异常信息可协助筛选、确定萤石矿找矿目标区; 将高精度磁法测量与视电阻率联合剖面测量相结合,可进一步判断萤石矿控矿构造的位置和规模; 高密度电阻率法测量可协助确定控矿构造的深部延伸情况。地表检查和深部钻探验证表明: 区域化探、高精度磁法测量、视电阻率联合剖面测量和高密度电阻率法测量等物化探综合信息找矿方法组合,可指导隐伏—半隐伏萤石矿的找矿工作。  相似文献   

Reliability analysis of the induced damage for single-hole rock blasting     

Mahdi Shadab Far  Yuan Wang  Yousif A. H. Dallo 《Georisk: Assessment and Management of Risk for Engineered Systems and Geohazards》2019,13(1):82-98

Rock explosion has always been a complex problem because neither rock characteristics nor explosion waves could be accurately estimated. As such, this imposes a high uncertainty on deterministic methodologies available for damage prediction. In this paper, by defining two damage zones around the blast hole, including crushed and cracked zones, a first-order reliability analysis (FORM) was adopted to address this issue. For this purpose, FORM was used in a double-loop algorithm, where the inner loop was responsible for converging the FORM, and the outer loop was assigned to feed the inner loop with new cases. Using such nested-loop algorithm, the probability of exceedance was calculated for any desired damage zone radius. The maximum effect of the involved parameters on the failure probability induced around the blast hole was additionally studied using a parametric reliability analysis. The results showed that the radii for crushed and cracked zones are limited to 0.5 and 4.2?m, respectively, so that the probability of going beyond these limits is less than 1%. Moreover, the analyses of decoupled explosions showed that increasing the gap between the explosion charge and wall of the borehole could severely reduce the failure probability; however, the maximum effect of decoupling ratio occurs in the small range of radii between 0.3?mm and 2.35?m.  相似文献   

九寨沟M_S7.0地震地电阻率变化时空演化分析          下载免费PDF全文

王同利  崔博闻  叶青  李菊珍  王丽红  童琼 《地球物理学报》2020,63(6):2345-2356

本文应用归一化变化速率(NVRM)方法,研究了2017年九寨沟M_S7.0地震周边800km范围内25个地电阻率台站2012—2018年的连续观测数据,分析了震中区周围的地电阻率时、空演化过程.结果显示:(1)25个台站中共有14个台站在震前出现了地电阻率变化,结合本次地震震源机制等分析其时空变化,认为邻近地震破裂带的临夏、通渭、武都和宝鸡台地电阻率在震前出现了下降—折返回升型的变化,符合前人已总结的强地震前地电阻率的变化过程.(2)地震发生前震中区周围大区域内出现了地电阻率负异常变化,且以震中区为中心呈条带分布,异常区的长轴方向与地震断裂带走向或地震烈度分布的长轴方向几乎垂直,与地震主压应力轴方向吻合.本文认为九寨沟M_S7.0强震发生之前,震中区周围出现的区域性地电阻率异常空间丛集现象是很好的中期和短临前兆;地电阻率震前异常动态演化、各向异性等特征对认识本次强震发震断层活动以及震源区应力场分布有启示意义.  相似文献   

Undrained monotonic shear behavior of marine soft clay after long-term cyclic loading     

Lin Guo  Hongxu Jin  Li Shi 《Marine Georesources & Geotechnology》2020,38(7):854-866

Abstract

In the coastal area, nearshore and offshore structures have been or will be built in marine soft clay deposits that have experienced long-term cyclic loads. Therefore, the mechanical behavior of marine clay after long-term cyclic loading needs to be investigated. In this research, a series of monotonic and cyclic triaxial tests were carried out to investigate the postcyclic mechanical behavior of the marine soft clay. The postcyclic water pore pressure, shear strength and secant stiffness are discussed by comparing the results with the standard monotonic test (without cyclic loading). It is very interesting that the postcyclic behavior of marine soft clay specimen is similar to the behavior of overconsolidated specimen, that is, the specimen shows apparent overconsolidation behavior after long-term cyclic loading. Then relationship between the overconsolidation ratio and the apparent overconsolidation ratio is established on the basis of the theory of equivalent overconsolidation. Finally, a validation formula is proposed which can predict the postcyclic undrained shear strength of marine soft clay.  相似文献   

少筋混凝土重力式桥墩抗震研究现状          下载免费PDF全文

鲁锦华  陈兴冲  丁明波  张熙胤 《世界地震工程》2020,(1):125-136

我国铁路桥梁普遍采用少筋混凝土重力式桥墩（配筋率<0.5%），现有普通钢筋混凝土结构的延性抗震理论不适用于该类型桥墩。为了促进我国铁路重力式桥墩抗震理论的发展，详细论述了我国少筋混凝土重力式桥墩的研究现状和存在问题。首先，对少筋混凝土重力式桥墩的破坏特征及破坏机理进行了总结；其次，分析了各参数对少筋混凝土重力式桥墩抗震性能的影响；再次，对目前少筋混凝土重力式桥墩的抗震设计方法进行了汇总与分析；最后，对少筋混凝土重力式桥墩的数值分析模型进行了归纳与分析。通过对现有研究的汇总发现:目前对少筋混凝土重力式桥墩的试验研究主要以拟静力方法为主，还缺少振动台试验研究其动力状态下的破坏机理及抗震性能；少筋混凝土重力式桥墩的破坏机理及其与各影响因素之间的定量关系还不明确；已提出的少筋混凝土重力式桥墩的抗震设计方法存在塑性铰区计算不合理等问题，还需要进一步的完善。为少筋混凝土重力式桥墩抗震研究提供了方向。  相似文献   

袋装石土工袋剪切力学特性试验研究     

樊科伟  刘斯宏  廖洁  方斌昕  王建磊 《岩土力学》2020,41(2):477-484

袋装石土工袋堆叠过程中在土工袋接触面形成的咬合和嵌固作用，对土工袋剪切力学强度和破坏形式有较大的影响。通过一系列直剪试验研究了咬合和嵌固作用的影响，试验结果表明：袋装石土工袋层间咬合和嵌固作用能够增大土工袋抗剪强度；咬合作用随着土工袋上部竖向应力的增大有所减小，而嵌固作用则有所增大；袋装石土工袋在剪切过程中会产生两种破坏形式，分别为土工袋袋体自身变形和层间滑动破坏；土工袋组合体在受到水平剪切力时会发生整体变形，随后在组合体内部产生阶梯型滑动面，滑裂面的形状随着竖向荷载的增大而有所不同，相应的抗剪强度也会随着滑动面的改变而变化。  相似文献