不锈钢纤维网对热压铁基预合金胎体抗冲击韧性的影响          下载免费PDF全文

孙吉伟  吴海霞  沈立娜  杨甘生 《探矿工程》2020,47(2):73-77

针对孕镶金刚石钻头在孔底钻进时受到各种冲击力而导致胎体出现裂纹甚至断裂的问题，提出了应用不锈钢纤维网提高胎体抗冲击韧性的方法。通过控制纤维网的摆放位置、目数和层数3个变量，测试了不同组合变量下的胎体抗冲击韧性。通过试验得到：（1）不锈钢纤维网能有效提高胎体的抗冲击韧性，而且X轴位置效果更好；（2）当纤维网的目数相同时，胎体抗冲击韧性随纤维网层数的增加而减小；（3）在纤维网层数相同的情况下，随着纤维网目数的增加，胎体抗冲击韧性呈现先增大后减小的趋势。当添加30目单层纤维网时，胎体的抗冲击韧性达到最大值。通过观察冲击断口、分析胎体断裂机理，解释了出现这种规律的原因，并提出了进一步优化胎体抗冲击韧性的方法。  相似文献   

凸轮型冲击旋压钻头成孔机理研究          下载免费PDF全文

博坤  孙思远  张永光 《探矿工程》2020,47(11):77-82

挤密钻头是潜孔锤冲击挤密钻进技术的关键所在，其结构形式直接影响着钻进效率、成孔质量和应用效果。应用非线性有限元理论，对动载荷作用下土体的弹塑性和压缩性的变化规律进行了分析。研究发现，常规钻头在冲击挤密钻进过程中产生的桩效应是导致钻进效率降低的主要原因。为了克服桩效应的影响，利用ANSYS/LSDYNA软件对阶梯式钻头和凸轮旋压钻头的钻进过程进行数值模拟分析，并通过实钻试验进行验证。数值模拟分析和试验结果均表明：凸轮旋压钻头能够有效避免钻进过程中土体回弹问题，降低桩效应对钻进效率的影响。试验结果与模拟结果相吻合，表明数值模拟的结果相对可靠。  相似文献   

Numerical prediction on the scour burial of cylinder object freely resting on the sandy seabed in the East China Sea using the DRAMBUIE model     

Chong-guang PANG  Li-qian LIU  Kun LI 《国际泥沙研究》2014,29(4):509-517

After experiencing 8-day combined tidal current, circulation and wave actions, scour depth surrounding cylinder object freely resting on sandy seabed in the East China Sea （ECS） in January is numerically predicted using the DRAMBUIE model designed for scour burial, which has been widely used and verified by in-situ experiments. During the period of numerical integration, the value of time t is generally variable at every time step via the special time-stepped approach developed by this paper to eliminate the time error. The tidal current velocity, wave orbital velocity and the depth-averaged circulation in the ECS have been obtained by numerical simulations with Estuarine Coastal and Ocean Model （ECOM）, Simulating Waves Nearshore （SWAN） model and Regional Ocean Modeling System （ROMS） model respectively. The control experiment and several idealized test cases on influential factors in scour depth reveal that the dominant hydrodynamic factor is tidal current in the ECS under normal weather conditions, and the impacts of shelf circulation and wave motion on local scour almost can be ignored with an exception of the Kuroshio area where the high-speed mainstream of Kuroshio flows. It is also indicated that in sandy sediments, the distribution of scour depth nearly follows the pattern of tidal currents, while the secondary influencing factor on scour depth appears to be grain size of sandy sediment in the ECS. Numerical tests on sediment grain size further testify that much finer sand is more easily scoured, and an increasing trend for scour depth with reduction of grain size is displayed due to imposed resistance of larger sized particles. Three aspects explored by this paper, including the empirical equations in the Defense Research Agency Mine Burial Environment （DRAMBUIE） model, the accuracy of inputs and infill process can severely affect the prediction of scour depth surrounding cylinder objects freely resting on sandy seabed in the ECS.  相似文献   

The thermal maturity of sedimentary basins as revealed by magnetic mineralogy     

Mansour M. Abdelmalak  Stéphane Polteau 《Basin Research》2020,32(6):1510-1531

The thermal evolution of sedimentary basins is usually constrained by maturity data, which is interpreted from Rock-Eval pyrolysis and vitrinite reflectance analytical results on field or boreholes samples. However, some thermal evolution models may be inaccurate due to the use of elevated maturities measured in samples collected within an undetected metamorphic contact aureole surrounding a magmatic intrusion. In this context, we investigate the maturity and magnetic mineralogy of 16 claystone samples from Disko-Svartenhuk Basin, part of the SE Baffin Bay volcanic margin. Samples were collected within thermal contact metamorphic aureoles near magma intrusions, as well as equivalent reference samples not affected by intrusions. Rock-Eval pyrolysis (T_max), and vitrinite reflectance (Ro) analysis were performed to assess the thermal maturity, which lies in the oil window when 435°C ≤ T_max ≤ 470°C and 0.6%–0.7% ≤ Ro ≤ 1.3%. In addition, we performed low- (<300K) and high-temperature (>300K) investigations of isothermal remanent magnetization to assess the magnetic mineralogy of the selected samples. The maturity results (0.37% ≤ Ro ≤ 2%, 22°C ≤ T_max ≤ 604°C) show a predominance of immature to early mature Type III organic matter, but do not reliably identify the contact aureole when compared to the reference samples. The magnetic assemblage of the immature samples consists of iron sulphide (greigite), goethite and oxidized or non-stoichiometric magnetite. The magnetic assemblage of the early mature to mature samples consists of stoichiometric magnetite and fine-grained pyrrhotite (<1 μm). These results document the disappearance of the iron sulphide (greigite) and increase in content of magnetite during normal burial. On the other hand, magnetite is interpreted to be the dominant magnetic mineral inside the contact aureole surrounding dyke/sill intrusions where palaeotemperatures indicate mature to over-mature state. Interestingly, the iron sulphide (greigite) is still detected in the contact aureole where palaeotemperatures exceeded 130°C. Therefore, the magnetic mineralogy is a sensitive method that can characterize normal burial history, as well as identify hidden metamorphic contact aureoles where the iron sulphide greigite is present at temperatures beyond its stability field.  相似文献   

桑沟湾沉积碳库年汇入速率的长期变化及其区域性差异   总被引：1，自引：1，他引：0  

刘赛  杨庶  杨茜  孙耀 《海洋学报》2018,40(1):47-56

对取自桑沟湾北西南三根柱样近200 a碳来源及埋藏通量的解析，分析了湾内不同站位各形态碳的差异性，进而对全湾碳埋藏进行了估算。湾内环流、贝藻养殖等造成湾内不同区域碳埋藏的差异；桑沟湾总碳（TC）平均量1.79%，有机碳（TOC）平均量0.54%，无机碳（TIC）平均量1.25%，TOC含量相对较小，为海陆混合来源，以陆源有机碳（C_t）为主，大规模人工养殖后，海源有机碳（C_a）有明显增加的趋势。桑沟湾碳埋藏通量平均为228.9 g/（m2·a），以无机碳为主要埋藏形式（约占70%），高的沉积速率及生物残骸沉降使桑沟湾养殖区碳的来源及埋藏区别于其他陆架海域。  相似文献   

北极快速变化的生态环境响应   总被引：1，自引：0，他引：1  

陈建芳  金海燕  白有成  庄燕培  李宏亮  李杨杰  任健 《海洋学报》2018,40(10):22-31

北冰洋由于其特殊的地理位置，成为全球变化响应最为敏感的地区。本文聚焦北极海冰变化幅度最大的西北冰洋，从营养盐、叶绿素、浮游植物群落和沉积碳埋藏等变化来讨论海洋生态环境对北极快速变化的响应。尽管太平洋北向流和北极周边河流输入加强可以增加西北冰洋上层营养盐储库，但由于夏季硅藻旺发向沉积物迁出大量生源元素，使得上层营养盐相对亏损，部分海域存在显著的氮限制和硅限制。随海冰减退，尽管夏末海盆区浮游植物呈现小型化趋势，但西北冰洋总体上浮游植物现存量和初级生产力呈现增高的趋势；伴随叶绿素极大层下移、北扩，以硅藻为代表的生物泵过程得以更高效的运转。在沉积物埋藏的有机碳中，除原先北冰洋生态系统占据重要比份的冰藻外，硅藻等藻类的有机碳埋藏也逐渐增加。西北冰洋海洋初级生产力的增加不仅促进了生物泵的运转和碳的埋藏，而且给海洋生态系统提供了更多的食物来源。北极海域目前已成为全球碳源汇格局变化最大、海洋生态系统改变最显著的地区之一。  相似文献   

Multi-factor sensitivity analysis on the stability of submarine hydrate-bearing slope     

《China Geology》2018,1(3):367-373

There are many factors affecting the instability of the submarine hydrate-bearing slope (SHBS), and the interaction with hydrate is very complicated. In this paper, the mechanical mechanism of the static liquefaction and instability of submarine slope caused by the dissociation of natural gas hydrate (NGH) resulting in the rapid increase of pore pressure of gas hydrate-bearing sediments (GHBS) and the decrease of effective stress are analyzed based on the time series and type of SHBS. Then, taking the typical submarine slope in the northern South China Sea as an example, four important factors affecting the stability of SHBS are selected, such as the degree of hydrate dissociation, the depth of hydrate burial, the thickness of hydrate, and the depth of seawater. According to the principle of orthogonal method, 25 orthogonal test schemes with 4 factors and 5 levels are designed and the safety factors of submarine slope stability of each scheme are calculated by using the strength reduction finite element method. By means of the orthogonal design range analysis and the variance analysis, sensitivity of influential factors on stability of SHBS are obtained. The results show that the degree of hydrate dissociation is the most sensitive, followed by hydrate burial depth, the thickness of hydrate and the depth of seawater. Finally, the concept of gas hydrate critical burial depth is put forward according to the influence law of gas hydrate burial depth, and the numerical simulation for specific submarine slope is carried out, which indicates the existence of critical burial depth.  相似文献   

“松科二井”用硬岩长寿命钻头的设计与应用     

李春  沈立娜 《探矿工程》2018,45(2):56-60

为提高“松科二井”在深井硬岩钻进中的寿命与效率,选用了高性能胎体材料、高强度焊接材料,并采用了合理的钻头结构与水路结构设计,研制的φ216/124 mm金刚石取心钻头在“松科二井”取得了良好的效果,本文介绍了适用于深井硬岩的金刚石钻头的设计及应用效果。  相似文献   

Tectono–Thermal Evolution, Hydrocarbon Filling and Accumulation Phases of the Hari Sag, in the Yingen–Ejinaqi Basin, Inner Mongolia, Northern China     

YANG Peng  REN Zhanli  XIA Bin  TIAN Tao  ZHANG Yong  QI Kai  REN Wenbo 《《地质学报》英文版》2018,92(3):1157-1169

This work restored the erosion thickness of the top surface of each Cretaceous formations penetrated by the typical well in the Hari sag, and simulated the subsidence burial history of this well with software BasinMod. It is firstly pointed out that the tectonic subsidence evolution of the Hari sag since the Cretaceous can be divided into four phases: initial subsidence phase, rapid subsidence phase,uplift and erosion phase, and stable slow subsidence phase. A detailed reconstruction of the tectonothermal evolution and hydrocarbon generation histories of typical well was undertaken using the EASY R_0% model, which is constrained by vitrinite reflectance(R_0) and homogenization temperatures of fluid inclusions. In the rapid subsidence phase, the peak period of hydrocarbon generation was reached at c.a.105.59 Ma with the increasing thermal evolution degree. A concomitant rapid increase in paleotemperatures occurred and reached a maximum geothermal gradient of about 43-45℃/km. The main hydrocarbon generation period ensued around 105.59-80.00 Ma and the greatest buried depth of the Hari sag was reached at c.a. 80.00 Ma, when the maximum paleo-temperature was over 180℃.Subsequently, the sag entered an uplift and erosion phase followed by a stable slow subsidence phase during which the temperature gradient, thermal evolution, and hydrocarbon generation decreased gradually. The hydrocarbon accumulation period was discussed based on homogenization temperatures of inclusions and it is believed that two periods of rapid hydrocarbon accumulation events occurred during the Cretaceous rapid subsidence phase. The first accumulation period observed in the Bayingebi Formation(K_1 b) occurred primarily around 105.59-103.50 Ma with temperatures of 125-150℃. The second accumulation period observed in the Suhongtu Formation(K_1 s) occurred primarily around84.00-80.00 Ma with temperatures of 120-130℃. The second is the major accumulation period, and the accumulation mainly occurred in the Late Cretaceous. The hydrocarbon accumulation process was comprehensively controlled by tectono-thermal evolution and hydrocarbon generation history. During the rapid subsidence phase, the paleo temperature and geothermal gradient increased rapidly and resulted in increasing thermal evolution extending into the peak period of hydrocarbon generation,which is the key reason for hydrocarbon filling and accumulation.  相似文献   

基于稳态碎岩方式的PDC钻头设计分析研究          下载免费PDF全文

汤凤林  沈中华  段隆臣  彭莉  柳少青  Чихоткин В.Ф. 《探矿工程》2018,45(1):73-78

自从20世纪80年代PDC复合片研发成功以来,PDC钻头由于其钻进性能强和耐磨性能好,在世界许多国家的石油钻井和地质勘探中得到了广泛应用,取得了很好的效果。但是,如何进一步提高其在钻探工程中的技术经济指标是一个很迫切的问题。俄罗斯博士Скоромных В. В.教授等对此进行多年研究,提出了稳态破碎岩石方式的思想,即在轴载和扭矩切力形成的合力R与切削面成垂直角度条件下,切入深度h不变时形成的一种碎岩方式。并在此基础上提出了一些设计PDC钻头方面的建议。  相似文献