三维建模技术在金刚石勘查中的应用——以辽宁省瓦房店地区为例     

付海涛 《地质通报》2019,38(1):51-55

金刚石矿是辽宁省的重要矿产之一,辽宁瓦房店地区已探明的原生金刚石矿资源/储量占中国金刚石资源量的一半以上。通过开展三维建模工作,对该区金伯利岩管的形态、深部找矿方向等提出了一些新的认识。研究认为,三维模型可以更好地展示金伯利岩型金刚石矿体的空间展布形态,并可为勘查工作提出指导性意见。  相似文献   

凤太矿集区东塘子铅锌矿床S、Pb同位素组成对成矿物质来源的示踪     

张革利  田涛  王瑞廷  高卫宏  常宗东 《中国地质》2020,47(2):472-484

东塘子铅锌矿床是秦岭成矿带中典型的铅锌矿床之一,前人对东塘子铅锌矿床成矿作用研究较多,但受限于测试手段及认识的局限性,多年来对其物质来源的认识仍未统一。本文在充分研究东塘子铅锌矿床地质特征的基础上,开展了相关样品的S、Pb同位素分析,分析对象包括了不同类型的铅锌矿石,讨论了该铅锌矿床的成矿物质来源、区内岩浆岩与铅锌成矿的关系等。研究表明:东塘子铅锌矿床矿石硫化物δ34S值变化范围为1.8‰～12.5‰,平均7.50‰,计算获得成矿流体中总硫δ34S∑S为7.7‰,显示海水硫酸盐(蒸发膏岩)与岩浆硫的混合来源特征。矿石铅同位素组成稳定,铅源主要来自富U-Th-Pb的上地壳与深部,可能与深部岩浆活动有关。研究结果表明,东塘子铅锌矿床的成矿过程与南秦岭印支期大规模多阶段构造-岩浆-流体活动密切相关,为下一阶段区内找矿工作提供了新的思路。  相似文献   

金矿立体地球化学探测模型与深部钻探验证   总被引：1，自引：0，他引：1  

王学求  张必敏  于学峰  杨德平  夏勇  谭亲平  刘耀文  张苏坤  田密  刘汉粮  李瑞红  韩志轩  熊玉新  吴慧  张宝云 《地球学报》2020,41(6):869-885

深部资源地球化学探测科学问题的的焦点是元素大深度垂向迁移机理和立体地球化学探测模型的建立。本文以胶东蚀变岩型金矿和贵州水银洞卡林型金矿钻孔岩芯和地表联合取样获得的数据, 建立千米深度立体地球化学探测模型。蚀变岩型金矿立体地球化学模型显示, Au、S和Hg与金矿密切相关, 分布模式既有相似性又有差异性, Au的立体几何分布模式兼具矿化剂元素S和远程指示元素Hg的双重特征, 金异常和矿化剂元素硫与矿体倾斜方向一致, 反映了成矿过程中流体沿控矿构造的轴向运移; 金异常与类气体元素汞在垂向上一致, 而且出现从矿体到地表的连续贯通式异常, 反映了流体沿微裂隙和纳米孔的垂向迁移。卡林型金矿立体地球化学模型显示, Au、As、Sb、Hg、Tl和S在不整合面都显示高含量特征, 与深部层状主矿体分布一致; 在矿体上覆地层中都存在弱异常, 显示了明显的成矿流体沿隐伏微小断裂垂向迁移特点; 所不同的是Sb和Tl元素在不整合面附近显示了最高的元素含量, 而Sb和Hg在近地表均显示了明显高的异常特征。立体几何模型清晰地显示了矿体的展布特征和范围, 而且金及其伴生元素垂向迁移在地表形成清晰异常, 为利用金及伴生元素和矿化剂元素进行深部矿体三维预测提供了重要依据, 对指导深部金矿勘查发挥了重要作用。针对胶东蚀变岩型金矿地表完全被土壤覆盖区的穿透性地球化学微细粒级土壤采样, 金属活动态提取分析圈定的异常, 经深部钻探验证, 胶东焦家成矿带五一村3200 m钻探, 在2428.00~3234.16 m深度发现6层矿化体, 其中高品位矿体位于2854 m深度; 上宫金矿地表基岩出露, 采集断层泥或裂隙岩石样品, 可以清晰探测深部异常, 经2000 m钻探, 在1312 m处发现高品位金铅锌银矿体; 贵州水银洞采集地表细粒级土壤, 能够直接有效地揭示深部金矿体, 经500~1500 m钻探验证, 在300~1500 m深度新增金资源量203 t。  相似文献   

大洋地幔橄榄岩-铬铁矿中的金刚石和深地幔再循环     

杨经绥 《地质力学学报》2020,26(5):731-741

全球多地蛇绿岩型地幔橄榄岩和铬铁矿中发现微粒金刚石，并在中国西藏南部和俄罗斯乌拉尔北部的蛇绿岩铬铁矿中发现原位产出的金刚石，认为是地球上金刚石的一种新的产出类型，不同于金伯利岩型金刚石和超高压变质型金刚石。它们与呈斯石英假象的柯石英、高压相的铬铁矿和青松矿等高压矿物以及碳硅石和单质矿物等强还原矿物伴生，指示蛇绿岩中的这些矿物组合形成于深度150~300 km或者更深的地幔。金刚石具有很轻的C同位素组成（δ13C-18‰~-28‰），并出现多种含Mn矿物和壳源成分包裹体。研究认为它们曾是早期深俯冲的地壳物质，达到>300 km深部地幔或地幔过渡带后，经历了熔融并产生新的流体，后者在上升过程中结晶成新的超高压、强还原矿物组合，通过地幔对流或地幔柱作用被带回到浅部地幔，由此建立了一个俯冲物质深地幔再循环的新模式。蛇绿岩型地幔橄榄岩和铬铁矿中发现金刚石等深部矿物，质疑了蛇绿岩铬铁矿形成于浅部地幔的已有认识，引发了一系列新的科学问题，提出了新的研究方向。   相似文献   

微生物勘探技术在潮汕坳陷油气勘探中的应用初探     

赵忠泉  孙鸣  万晓明  陈胜红  赵静  宋立军  李辉  强昆生  梁永兴 《中国地质》2020,47(3):645-654

东沙海域潮汕坳陷中生界研究程度相对较低,油气分布规律不明,为了加强对该区油气分布和富集规律的研究,针对潮汕坳陷西部地质目标首次应用微生物地球化学勘探技术(MGCE),探讨其含油气性。MGCE技术以轻烃微渗漏理论为基础,采用地质微生物学方法和地球化学方法检测研究区海底表层的微生物异常和吸附烃异常,预测研究区下伏地层中油气的富集区及其油气性质。检测结果显示研究区西部凹陷的斜坡区微生物异常呈块状发育,轻烃微渗漏强度变化大,可能为潜在油气富集区,酸解吸附烃成果显示可能的油气性质为干气和凝析油气。  相似文献   

高强耐热铝合金钻杆材料优选          下载免费PDF全文

梁健  尹浩  孙建华  李亚红  王成彪  张金昌 《探矿工程》2020,47(4):65-71

铝合金钻杆的使用性能是制约深部钻探技术发展的“瓶颈”。本文综合考虑孔内工况因素和钻杆性能因素，以钻柱组合设计为基础准则，从特深孔钻探工程技术需求出发，开展了高强耐温铝合金钻杆材质选择和评价的试验研究。试验结果表明：2219铝合金固溶时效制度分别为535 ℃/1 h、165 ℃/20 h，2618铝合金固溶时效制度分别为530 ℃/1 h、200 ℃/20 h；2219铝合金在高温长时间暴露后的室温力学性能优于2618铝合金，在高温瞬时条件下的力学性能劣于2618铝合金；2219铝合金中含有Zr，该元素在热暴露过程中起到减缓溶质扩散速率的作用，这对提高热暴露后的剩余强度是有利的。  相似文献   

Deep‐water dunes on drowned isolated carbonate terraces (Mozambique Channel,south‐west Indian Ocean)     

Elda Miramontes  Stephan J. Jorry  Gwenael Jouet  John W. Counts  Simon Courgeon  Pascal Le Roy  Charline Guerin  F. Javier Hernndez‐Molina 《Sedimentology》2019,66(4):1222-1242

Subaqueous sand dunes are common bedforms on continental shelves dominated by tidal and geostrophic currents. However, much less is known about sand dunes in deep‐marine settings that are affected by strong bottom currents. In this study, dune fields were identified on drowned isolated carbonate platforms in the Mozambique Channel (south‐west Indian Ocean). The acquired data include multibeam bathymetry, multi‐channel high‐resolution seismic reflection data, sea floor imagery, a sediment sample and current measurements from a moored current meter and hull‐mounted acoustic Doppler current profiler. The dunes are located at water depths ranging from 200 to 600 m on the slope terraces of a modern atoll (Bassas da India Atoll) and within small depressions formed during tectonic deformation of drowned carbonate platforms (Sakalaves Seamount and Jaguar Bank). Dunes are composed of bioclastic medium size sand, and are large to very large, with wavelengths of 40 to 350 m and heights of 0·9 to 9·0 m. Dune migration seems to be unidirectional in each dune field, suggesting a continuous import and export of bioclastic sand, with little sand being recycled. Oceanic currents are very intense in the Mozambique Channel and may be able to erode submerged carbonates, generating carbonate sand at great depths. A mooring located at 463 m water depth on the Hall Bank (30 km west of the Jaguar Bank) showed vigorous bottom currents, with mean speeds of 14 cm sec^?1 and maximum speeds of 57 cm sec^?1, compatible with sand dune formation. The intensity of currents is highly variable and is related to tidal processes (high‐frequency variability) and to anticyclonic eddies near the seamounts (low‐frequency variability). This study contributes to a better understanding of the formation of dunes in deep‐marine settings and provides valuable information about carbonate preservation after drowning, and the impact of bottom currents on sediment distribution and sea floor morphology.  相似文献   

Strain analysis of a seismically imaged mass‐transport complex,offshore Uruguay     

Michael J. Steventon  Christopher A.‐L. Jackson  David M. Hodgson  Howard D. Johnson 《Basin Research》2019,31(3):600-620

Strain style, magnitude and distribution within mass‐transport complexes (MTCs) are important for understanding the process evolution of submarine mass flows and for estimating their runout distances. Structural restoration and quantification of strain in gravitationally driven passive margins have been shown to approximately balance between updip extensional and downdip contractional domains; such an exercise has not yet been attempted for MTCs. We here interpret and structurally restore a shallowly buried (c. 1,500 mbsf) and well‐imaged MTC, offshore Uruguay using a high‐resolution (12.5 m vertical and 15 × 12.5 m horizontal resolution) three‐dimensional seismic‐reflection survey. This allows us to characterise and quantify vertical and lateral strain distribution within the deposit. Detailed seismic mapping and attribute analysis shows that the MTC is characterised by a complicated array of kinematic indicators, which vary spatially in style and concentration. Seismic‐attribute extractions reveal several previously undocumented fabrics preserved in the MTC, including internal shearing in the form of sub‐orthogonal shear zones, and fold‐thrust systems within the basal shear zone beneath rafted‐blocks. These features suggest multiple transport directions and phases of flow during emplacement. The MTC is characterised by a broadly tripartite strain distribution, with extensional (e.g. normal faults), translational and contractional (e.g. folds and thrusts) domains, along with a radial frontally emergent zone. We also show how strain is preferentially concentrated around intra‐MTC rafted‐blocks due to their kinematic interactions with the underlying basal shear zone. Overall, and even when volume loss within the frontally emergent zone is included, a strain difference between extension (1.6–1.9 km) and contraction (6.7–7.3 km) is calculated. We attribute this to a combination of distributed, sub‐seismic, ‘cryptic’ strain, likely related to de‐watering, grain‐scale deformation and related changes in bulk sediment volume. This work has implications for assessing MTCs strain distribution and provides a practical approach for evaluating structural interpretations within such deposits.  相似文献   

Bathymetry,substrate and fishing areas of Southeast Atlantic high-seas seamounts   总被引：1，自引：0，他引：1  

OA Bergstad  ÅS Høines  R Sarralde  G Campanis  M Gil  F Ramil 《African Journal of Marine Science》2019,41(1):11-28

Most of the Southeast Atlantic Ocean is abyssal, and global bathymetries suggest that only ～3.2% of the areas beyond national jurisdiction (ABNJ; also known as the high seas, as defined in the United Nations Convention on the Law of the Sea [UNCLOS]) are shallower than 2 500 m. This study mapped bathymetry and characterised substrates in selected seamount summit areas, including several that have been or may become fishing areas. The southernmost location, the Schmitt-Ott Seamount, has exposed volcanic bedrock with surrounding flats covered by thin biogenic sediments and/or coral rubble that appears ancient. At Wüst, Vema, Valdivia and Ewing seamounts the basaltic base appears to be overlain by coral caps and other coral substrates (sheets, rubble). Adjacent summit plains have biogenic sediments of varying thickness. Vema has a flat, roughly circular summit, <100 m deep, with the shallowest point being a 22-m-deep summit knoll; the upper slopes have ancient coral framework, but the summit has a mixture of coralline and volcanic rock and coarse sediments, including extensive areas with coralline algae and kelp forests. Valdivia Bank is a 230-m-deep, flat, rocky area (～11 × 5 km), protruding steeply from the extensive multi-summit Valdivia subarea of the Walvis Ridge. The distribution of past fisheries in the Convention Area of the South East Atlantic Fisheries Organisation (SEAFO) was considered in relation to the new information on bathymetry and substrate.  相似文献   

鄂尔多斯盆地北部东胜地区侏罗系—白垩系钻孔数据库与三维地质模型          下载免费PDF全文

张天福  张云  程先钰  孙立新  程银行  周小希  王少轶  马海林  鲁超 《中国地质》2020,47(S1):220-230

随着砂岩型铀矿找矿工作的进一步开展，其对以往钻孔资料集成应用的需求尤为迫切。在煤田钻孔资料“二次开发利用”和“煤铀兼探”新方法、新思路的指导下，通过采集东胜地区钻孔资料属性数据，按照统一的标准和要求，将煤田、铀矿等类型的重要钻孔资料，通过整理、扫描、数据类型转换、录入和集成，建成了东胜地区侏罗系—白垩系综合钻孔数据库，实现了对多源钻孔数据的统一管理。该数据库共包含3个Access数据库和相应的成果图件。每个Access数据库均包含钻孔基本信息表、综合柱状分层表、岩性描述分层表、地层名称及代号表、地层颜色表、测井曲线数据表、测井曲线配置表和钻孔弯曲度测量数据表等8张数据表，分别详细记录了地质编录岩性信息、地层分层信息、岩石颜色信息、测井曲线信息、水文分层信息、钻孔样品采样信息、弯曲度测量信息等。通过应用实践，该钻孔数据库成果可实现连井剖面、含煤含铀目的层的顶底板标高、地层等厚图、砂体等厚图及含砂率图等重要基础地质图件的快速生成，从而提高数据的使用效率并为铀矿勘查及研究工作提供重要数据基础。  相似文献