Thresholds for post-wildfire debris flows: Insights from the Pinal Fire,Arizona, USA     

Carissa A. Raymond  Luke A. McGuire  Ann M. Youberg  Dennis M. Staley  Jason W. Kean 《地球表面变化过程与地形》2020,45(6):1349-1360

Wildfire significantly alters the hydrologic properties of a burned area, leading to increases in overland flow, erosion, and the potential for runoff-generated debris flows. The initiation of debris flows in recently burned areas is well characterized by rainfall intensity-duration (ID) thresholds. However, there is currently a paucity of data quantifying the rainfall intensities required to trigger post-wildfire debris flows, which limits our understanding of how and why rainfall ID thresholds vary in different climatic and geologic settings. In this study, we monitored debris-flow activity following the Pinal Fire in central Arizona, which differs from both a climatic and hydrogeomorphic perspective from other regions in the western United States where ID thresholds for post-wildfire debris flows are well established, namely the Transverse Ranges of southern California. Since the peak rainfall intensity within a rainstorm may exceed the rainfall intensity required to trigger a debris flow, the development of robust rainfall ID thresholds requires knowledge of the timing of debris flows within rainstorms. Existing post-wildfire debris-flow studies in Arizona only constrain the peak rainfall intensity within debris-flow-producing storms, which may far exceed the intensity that actually triggered the observed debris flow. In this study, we used pressure transducers within five burned drainage basins to constrain the timing of debris flows within rainstorms. Rainfall ID thresholds derived here from triggering rainfall intensities are, on average, 22 mm h⁻¹ lower than ID thresholds derived under the assumption that the triggering intensity is equal to the maximum rainfall intensity recorded during a rainstorm. We then use a hydrologic model to demonstrate that the magnitude of the 15-min rainfall ID threshold at the Pinal Fire site is associated with the rainfall intensity required to exceed a recently proposed dimensionless discharge threshold for debris-flow initiation. Model results further suggest that previously observed differences in regional ID thresholds between Arizona and the San Gabriel Mountains of southern California may be attributed, in large part, to differences in the hydraulic properties of burned soils. © 2019 John Wiley & Sons, Ltd.  相似文献   

Investigation of the elevation of saltwater wedge due to subsurface dams     

Qinpeng Chang  Tianyuan Zheng  Youyuan Chen  Xilai Zheng  Marc Walther 《水文研究》2020,34(22):4251-4261

Subsurface dams are rather effective and used for the prevention of saltwater intrusion in coastal regions around the world. We carried out the laboratory experiments to investigate the elevation of saltwater wedge after the construction of subsurface dams. The elevation of saltwater wedge refers to the upward movement of the downstream saltwater wedge because the subsurface dams obstruct the regional groundwater flow and reduce the freshwater discharge. Consequently, the saltwater wedge cannot further extend in the longitudinal direction but rises in the vertical profile resulting in significant downstream aquifer salinization. In order to quantitatively address this issue, field-scale numerical simulations were conducted to explore the influence of various dam heights, distances, and hydraulic gradients on the elevation of saltwater wedge. Our investigation shows that the upward movement of the saltwater wedge and its areal extension in the vertical domain of the downstream aquifer become more severe with a higher dam and performed a great dependence on the freshwater discharge. Furthermore, the increase of the hydraulic gradient and the dam distance from the sea boundary leads to a more pronounced wedge elevation. This phenomenon comes from the variation of the freshwater discharge due to the modification of dam height, location, and hydraulic gradient. Large freshwater discharge can generate greater repulsive force to restrain the elevation of saltwater wedge. These conclusions provide theoretical references for the behaviour of the freshwater–seawater interface after the construction of subsurface dams and help optimize the design strategy to better utilize the coastal groundwater resources.  相似文献   

多点液压式波浪能海水淡化系统建模与仿真   总被引：1，自引：1，他引：0  

胡缘  杨绍辉  何宏舟  陈沪  郑松根  张迪 《海洋工程》2019,37(1):134-141

为缓解淡水资源短缺及化石能源过度使用问题,提出多点液压式波浪能海水淡化系统,该系统主要由采能装置、液压传递系统与反渗透膜海水淡化设备组成。系统的采能装置采用振荡浮子式,可将波浪能转换为浮子振荡从而被液压系统吸收达到采集波浪能的目的。为了提高液压式波浪能海水淡化系统的采能效率及淡水率,利用AMEsim软件对液压传递系统进行建模与仿真,分析了蓄能器、浮子个数及波高对液压传递系统输出响应的影响。结果表明:蓄能器能够使液压马达的输出响应更加稳定;当浮子的数量增加时,液压系统达到稳定的运行状态所需的时间更短,从而有利于提高系统的效率;波高在2 m左右时,本系统的产水量达到最大。  相似文献   

CMD180T型钻机在尚义地热井施工中的应用          下载免费PDF全文

王雷浩  李光宏  石逊  殷邈 《探矿工程》2020,47(1):58-61

经物探分析在河北省张家口尚义县大青沟镇南海子村东南1.0 km存在深部断裂构造，为了寻找开发坝上地区地热资源，决定在该位置施工一口2000 m深地热井，即穿过该断裂构造寻找导水通道，完成地热井施工任务。施工中采用了CMD180T型钻机，该钻机采用了先进的全液压传动系统，自动化程度高，性能优异，可大大降低操作人员的劳动强度且易于搬迁、易于操作。其优势在这次地热井工程施工过程中得到了充分的体现。  相似文献   

非迁移潮作用下的电离层赤道异常区单峰现象及其经度分布          下载免费PDF全文

田耀宇  郝永强  张东和  肖佐 《地球物理学报》2019,62(11):4067-4081

当喷泉效应较弱而双峰结构发展不充分的时候，可能在赤道异常区仅能够观测到一个电子密度的峰值，称之为单峰现象.本文利用CHAllenging Minisatellite Payload卫星在2001-2010年的电子密度数据给出了单峰的发生规律，单峰在地方时早上08：00-10：00和下午16：00-19：00发生率高，发生位置在经度上呈现多波数分布，尤其在10：00-18：00明显：在分季时多呈现四波，而在冬至季时以三波为主.单峰发生多的经度，正好对应着双峰的结构特征较弱之处.究其原因，是非迁移潮的DE2和DE3分量调制了背景风场和大气发电机电场，在电场和喷泉效应减弱的经度，双峰结构难以形成时，就会表现为单峰结构.本文扩展了对单峰现象的地方时、季节和经度分布等规律的了解，明确了非迁移潮在其中施加的影响，由此，单峰同双峰现象一样可以用于研究非迁移潮对热层-电离层的作用.  相似文献   

函数模型与随机模型双约束的GPS-InSAR数据融合方法建立三维形变场     

马艳鸽  赵丽华  张盼盼  吕佳凝 《大地测量与地球动力学》2019,39(11):1112-1117

针对InSAR技术研究地表三维形变时监测信息不足的问题，以GPS监测信息为先验信息，建立附有随机模型约束的地表三维形变模型。考虑到SAR卫星极轨方式运行导致LOS向观测量对南北向形变不敏感的问题，以GPS南北向形变观测值作为强约束，构建三维形变解算的函数约束条件。模拟数据与西安地区实测数据的计算结果表明，基于随机模型与函数模型共同约束的地表三维形变参数最小二乘解的精度优于仅有函数模型约束或仅有随机模型约束及无任何约束的参数解精度。  相似文献   

Subsurface flow measurements using passive flux meters in variably-saturated cold-regions landscapes     

Élise G. Devoie  Ryan F. Connon  James R. Craig  William L. Quinton 《水文研究》2020,34(23):4541-4546

To date, passive flux meters have predominantly been applied in temperate environments for tracking the movement of contaminants in groundwater. This study applies these instruments to reduce uncertainty in (typically instantaneous) flux measurements made in a low-gradient, wetland dominated, discontinuous permafrost environment. This method supports improved estimation of unsaturated and over-winter subsurface flows which are very difficult to quantify using hydraulic gradient-based approaches. Improved subsurface flow estimates can play a key role in understanding the water budget of this landscape.  相似文献   

Geostatistical features of streambed vertical hydraulic conductivities in Frenchman Creek Watershed in Western Nebraska     

Olufemi P. Abimbola  Aaron R. Mittelstet  Troy E. Gilmore 《水文研究》2020,34(16):3481-3491

This study evaluated the spatial variability of streambed vertical hydraulic conductivity (K_v) in different stream morphologies in the Frenchman Creek Watershed, Western Nebraska, using different variogram models. Streambed K_v values were determined in situ using permeameter tests at 10 sites in Frenchman, Stinking Water and Spring Creeks during the dry season at baseflow conditions. Measurements were taken both in straight and meandering stream channels during a 5 day period at similar flow conditions. Each test site comprised of at least three transects and each transect comprised of at least three K_v measurements. Linear, Gaussian, exponential and spherical variogram models were used with Kriging gridding method for the 10 sites. As a goodness-of-fit statistic for the variogram models, cross-validation results showed differences in the median absolute deviation and the standard deviation of the cross-validation residuals. Results show that using the geometric means of the 10 sites for gridding performs better than using either all the K_v values from the 93 permeameter tests or 10 K_v values from the middle transects and centre permeameters. Incorporating both the spatial variability and the uncertainty involved in the measurement at a reach segment can yield more accurate grid results that can be useful in calibrating K_v at watershed or sub-watershed scales in distributed hydrological models.  相似文献   

Response to the paper by H. Zia,B. Lecampion “Explicit versus implicit front advancing schemes for the simulation of hydraulic fracture growth” (Int. J. Numer. Anal. Methods Geomech., 2019, 43 (6), 1300–1315)     

Aleksandr Linkov 《国际地质力学数值与分析法杂志》2020,44(16):2254-2259

The response presents three comments, which (i) explain theoretical background for the success of the explicit front advancing scheme by Zia and Lecampion (comment 1), (ii) suggest possible extensions (comment 2), and (iii) pay attention on expected limitations of the scheme to be checked by the authors in numerical experiments (comment 3). The response does not intend to present novel results: it is entirely based on known results published in the references cited.  相似文献   

The δ60/58Ni Values of Twenty‐Six Selected Geological Reference Materials     

Weihan Li  Jian‐Ming Zhu  Decan Tan  Guilin Han  Zhouqiao Zhao  Guangliang Wu 《Geostandards and Geoanalytical Research》2020,44(3):523-535

The high‐precision δ^60/58Ni values of twenty‐six geological reference materials, including igneous rocks, sedimentary rocks, stream sediments, soils and plants are reported. The δ^60/58Ni values of all samples were determined by double‐spike MC‐ICP‐MS (Nu Plasma III). Isotope standard solution (NIST SRM 986) and geological reference materials (BHVO‐2, BCR‐2, JP‐1, PCC‐1, etc.) were used to evaluate the measurement bias and intermediate precision over a period of six months. Our results show that the intermediate precision of Ni isotope determination was 0.05‰ (2s, n = 69) for spiked NIST SRM 986 and typically 0.06‰ for actual samples, and the δ^60/58Ni _{NIST SRM 986} values were in excellent agreement with previous studies. Eighteen high‐precision Ni isotope ratios of geological reference materials are first reported here, and their δ^60/58Ni values varied from ?0.27‰ to 0.52‰, with a mean of 0.13 ± 0.34‰ (2s, n = 18). Additionally, SGR‐1b (0.56 ± 0.04‰, 2s), GSS‐1 (?0.27 ± 0.06‰, 2s), GSS‐7 (?0.11 ± 0.01‰, 2s), GSD‐10 (0.46 ± 0.06‰, 2s) and GSB‐12 (0.52 ± 0.06‰, 2s) could potentially serve as candidate reference materials for Ni isotope fractionation and comparison of Ni isotopic compositions among different laboratories.  相似文献