柱顶层间隔震体系增量动力响应研究          下载免费PDF全文

袁梦醒  陈望  刘彦辉  谭平  金建敏 《地震工程学报》2020,42(4):872-880

针对悬臂柱顶有拉梁和无拉梁层间隔震体系的抗震性能问题,运用增量动力分析(IDA)方法进行弹塑性分析,模拟结构从弹性到弹塑性直至最后倒塌的全过程。通过调幅地震动得到相应的层间位移角及峰值加速度,分别绘制单条与多条IDA曲线分析拉梁对隔震结构动力响应的影响,研究两种结构的抗震性能。结果表明:在相同性能点,有拉梁和无拉梁对纤维铰弯矩值和曲率值基本无影响,而在不同性能点,纤维铰状态明显不同;两种体系从正常使用阶段到防止倒塌阶段所需的加速度峰值的差距慢慢增大;在极罕遇地震下,柱顶有拉梁层间隔震体系的下部结构抗震性能要高于柱顶无拉梁层间隔震体系。  相似文献   

敦煌-格尔木铁路沿线风动力环境特征     

鱼燕萍  张克存  安志山  张余 《中国沙漠》2020,40(1):41-48

敦煌-格尔木铁路沿线地形复杂、起沙因素多变、沙源丰富，沙害问题日益严重。目前对其风沙活动规律还未有研究，不利于防沙工作的开展。为此，通过对自北向南的5个观测点（S1、S2、S3、S4、S5）风速和风向的观测、计算和分析，利用平均风速、起沙风况及输沙势对敦格铁路沿线的风动力环境特征进行研究。结果表明：S5、S4和S3的风况对铁路风沙灾害防治意义较大。S5年平均风速、起沙风频率和输沙势最大，春季风沙活动最为强烈，且风向单一、风力强劲，风沙运动方向基本与铁路垂直，沙粒易在铁路附近堆积。S4夏季风沙活动最为强烈；S3春季风沙活动最为强烈，且风向单一，S4和S3的风沙运动方向与铁路夹角小于90°，附近沙源广阔，铁路易受风沙侵蚀，阻碍交通运营。  相似文献   

基于细分行业的安徽省创新型企业集聚研究     

白如山  胡森林  庄良  刘岩  刘恺恺  黄鹏娜 《世界地理研究》2020,29(6):1190-1201

创新型企业作为塑造创新地理格局的重要力量，其区位选择的外部特征及内在机理亟须予以系统化研究。基于对安徽省创新型企业的细分行业与空间建库，采用核密度估计和地理探测器等方法，对细分行业下的创新型企业空间集聚特征及影响因素进行研究。结果表明：（1）安徽省创新型企业类型以先进制造和自动化为主，并以生物与新医药、新材料、电子信息为辅；（2）创新型企业空间集聚的不均衡特征显著，呈现出“一核一带多节点”的集聚分布特征，且合肥、芜湖是两个重要集聚区；不同细分行业视角下创新型企业的空间分布形态各异，可归纳为点-轴式、极核式、双核式及多核分散式等4种空间组织形态。（3）创新型因子对于创新型企业的空间集聚最为重要，但传统型和政策型因子的重要性仍不容忽视。其中，产业基础、人力资本、创新投入是最核心的因素，但各行业创新型企业的影响因素作用力则表现出一定的异质性。  相似文献   

城镇化与生态环境耦合的动态模拟——研究进展与展望     

崔学刚  方创琳  刘海猛  刘晓菲  李咏红 《地理学报(英文版)》2020,30(2):333-352

Urbanization and eco-environment coupling is a research hotspot.Dynamic simulation of urbanization and eco-environment coupling needs to be improved because the processes of coupling are complex and statistical methods are limited.Systems science and cross-scale coupling allow us to define the coupled urbanization and eco-environment system as an open complex giant system with multiple feedback loops.We review the current state of dynamic simulation of urbanization and eco-environment coupling and find that:(1)The use of dynamic simulation is an increasing trend,the relevant theory is being developed,and modeling processes are being improved;(2)Dynamic simulation technology has become diversified,refined,intelligent and integrated;(3)Simulation is mainly performed for three aspects of the coupling,multiple regions and multiple elements,local coupling and telecoupling,and regional synergy.However,we also found some shortcomings:(1)Basic theories are inadequately developed and insufficiently integrated;(2)The methods of unifying systems and sharing data are behind the times;(3)Coupling relations and the dynamic characteristics of the main driving elements are not fully understood or completely identified.Additionally,simulation of telecoupling does not quantify parameters and is not systemically unified,and therefore cannot be used to represent spatial synergy.In the future,we must promote communication between research networks,technology integration and data sharing to identify the processes governing change in coupled relations and in the main driving elements in urban agglomerations.Finally,we must build decision support systems to plan and ensure regional sustainable urbanization.  相似文献   

顾及基准站坐标动态特性与稳定性的区域框架构建     

蒋光伟  王斌  王延伟  李康  孙洋洋 《地球物理学进展》2020,(1):8-15

基准站受构造运动与非线性因素的影响,如何构建高精度、现势性强的精细区域框架是位置服务与形变分析的的关键.笔者提出顾及基准站坐标动态特性与稳定性的区域框架构建方法.以我国西部与东部某城市的多年连续运行基准站数据为例进行试算比对,试验结果表明:该方法是可行的,较好地顾及了基准站的坐标特性与非线性影响,考虑了基准站的垂直运动规律,可构建高精度的区域基准,可发现区域基准的微动态变化.  相似文献   

土遗址全长黏结式锚固系统动力响应解析方法     

芦苇  赵冬  李东波  毛筱霏 《岩土力学》2020,41(4):1377-1387

以纵向宽大裂隙引起的夯土城墙遗址稳定问题为背景，建立危险土体?锚杆?稳定土体锚固系统简化力学模型。该模型将土体对锚杆的摩阻作用简化为一个线性弹簧和一个与速度相关的阻尼器的并联机构，将裂隙段锚杆对两侧土体的拉结作用简化为一个线性弹簧。基于弹性体动力理论建立锚固系统动力平衡方程，并推导了锚杆轴力和位移的动力响应解析解。最后，以新疆高昌故城南城墙某段锚固工程为例对提出的解析方法进行了说明，明确了锚杆轴力响应特征及其分布规律，并通过数值分析对其合理性进行了验证。结果表明：在动力作用下同一位置锚杆的轴力响应呈围绕静力平衡位置的波动形态，轴力峰值点位于裂隙附近，且逐渐向临空端和锚固端指数衰减。在考虑地震加速度沿遗址高度的放大效应后能够获得较精确的锚杆轴力响应。  相似文献   

基于地基GPS-TEC的中国区域地震电离层效应研究     

翟笃林  祝芙英  林剑  杨剑 《中国地震》2020,36(4):857-871

基于中国陆态网络地基GPS-TEC观测，针对2008～2019年发生在中国区域的7个M_S≥6.0地震，采用滑动四分位距法分析了地震前后的电离层扰动时空分布特征。结果显示，5个地震的震前2～6天，GPS-TEC值出现负异常扰动，地震发生期间及震后电离层TEC出现正异常扰动，主要集中在震后2～7天；GPS观测站距离震中越近，垂直上空的TEC扰动越明显，扰动空间最大范围可达2000km。随着震级的增加，震前电离层TEC异常扰动的发生率有所增加，且异常覆盖的范围也有所扩大。因此，认为震前一周内的电离层TEC变化可能提供揭示电离层扰动与地震活动之间关系的线索。  相似文献   

Nonlinear analysis of masonry structures using fiber-section line elements     

Matteo Peruch  Enrico Spacone  Guido Camata 《地震工程与结构动力学》2019,48(12):1345-1364

For seismic analysis of unreinforced masonry (URM) buildings characterized by a box-like behavior, a widely accepted model is based on the equivalent frame idealization of walls. The equivalent frame model uses 1D elements to represent the vertical piers and horizontal spandrels which are connected by rigid nodes. The mechanical characterization of the elements is one of the crucial aspects to predict reasonably the building seismic behavior. Through the comparison with pseudo-static and dynamic experimental tests performed on two-story full-scale buildings, this paper validates the frame modeling in the OpenSees framework, which includes a fiber-section force-based beam element for the axial-flexural behavior, coupled with a cyclic shear-deformation phenomenological law.  相似文献   

Evaluation of force-based and displacement-based out-of-plane seismic assessment methods for unreinforced masonry walls through refined model simulations     

Michele Godio  Katrin Beyer 《地震工程与结构动力学》2019,48(4):454-475

The performance of force-based and displacement-based seismic assessment methods for the life-safety limit state check of out-of-plane loaded unreinforced masonry walls is evaluated on the basis of refined numerical simulations. For this purpose, a discrete element model of a vertically spanning wall is built and validated against experimental results from static and dynamic test conditions. The model is then analysed for a large range of wall configurations. For each configuration, a static pushover analysis and a series of incremental dynamic analyses are run, the latter permitting to determine the capacity of the wall under dynamic loading. The accuracy of the assessment methods in predicting the acceleration at which the walls collapse is evaluated. It is found that the displacement-based method is more accurate, robust, and safe than the force-based method. The comparison also shows that for walls characterised by a relatively high ratio of axial load to Euler's critical load, both assessment methods lead to an overestimation of the wall capacity. As a remedy, a modification to the methods based on a recently developed mechanical model is put forward and tested. For the force-based method, it is additionally suggested to set for walls with relatively high overburden ratios the behaviour factor equal to 1. To ensure reproducibility of this study, all input and output files of the numerical simulations are made publicly available.  相似文献   

内点最大化与冗余点控制的无人机遥感图像配准     

余蕊  陈玮扬  杨扬  杨昆  罗毅 《遥感学报》2020,24(11):1325-1341

利用小型无人机进行遥感图像配准在自然灾害损害评估、环境监测和目标检测与追踪等领域发挥着至关重要的作用，但小型无人机的图像采集过程容易受风速/风向、复杂地形、电池容量、飞行姿态、飞行高度等自然或人为因素的影响。这些问题通常会导致捕捉到的场景重叠率低与图像非刚性畸变，在特征点提取过程中产生大量冗余点，增加了图像配准的难度。本文提出一种基于特征点的小型无人机图像配准方法，该方法的核心思想是在配准过程中识别冗余点，同时最大化可用内点数量。所识别的冗余点当作控制点，用于控制网格代图像的运动。最后通过最大化内点和合理移动控制点来恢复图像变换。本文使用50对小型无人机图像进行特征匹配和图像配准的实验，其中平均配准精度可达80.38%，并且本文方法在所有的情况下都优于5种当前流行算法。  相似文献