Numerical Simulation of Magnetic Reconnection Driven by the Laser Helmholtz Capacitor-coil Targets     

XU Shan-shan  MEI Zhi-xing  ZHONG Jia-yong  LIN Jun 《Chinese Astronomy and Astrophysics》2021,45(2):131-146

  相似文献   

基于NPSVM模型的超新星识别方法          下载免费PDF全文

王精东  陈星星  梁吴颖  黄泽锋  全少武  沈锦泫  石雄辉 《天文学报》2021,62(2):15-53

巡天观测与高能物理、黑洞天文等领域均有密切的联系.基于星系-超新星二分类问题,研究光谱数据预处理,结合余弦相似度改善PCA(Principal Component Analysis)光谱分解特征提取方法,用SDSS(the Sloan Digital Sky Survey)、WISeREP(the Weizmann Interactive Supernova data REPository)组成的5620条光谱数据集训练支持向量机,可以得到0.498%泛化误差的识别模型和新样本分类概率.使用Neyman-Pearson决策方法建立NPSVM(Neyman-Pearson Support Vector Machine)模型可进一步降低超新星的漏判率.  相似文献   

基于双谱滤波的综合脉冲星时算法研究          下载免费PDF全文

周庆勇  魏子卿  张华  刘思伟  孙鹏飞  张奋  姜坤  刘晓刚  李奎 《天文学报》2021,62(2):19-95

毫秒脉冲星的自转频率非常稳定,提供了一种独立的基于遥远自然天体并能持续数百万乃至数十亿年的时间基准,具有稳定性强、运行时间长、服务范围广等特点.为了减弱毫秒脉冲星计时观测中各种高斯噪声对脉冲星时的影响,研究了一种基于双谱滤波的综合脉冲星时构建算法,处理分析了国际脉冲星计时阵(International Pul-sar Timing Array,IPTA)最新发布的4颗毫秒脉冲星(PSR J0437-4715、J0613-0200、J1713+0747和J1909-3744)的观测数据,分析了不同时间尺度综合脉冲星时的稳定性,并与构成国际原子时(International Atomic Time,TAI)的4家授时单位原子钟稳定性进行了比较.结果表明:双谱滤波算法能够较好地抑制观测噪声,提高综合脉冲星时的稳定性.相比于经典加权算法,综合脉冲星时1 yr、10 yr稳定度从7.77×10^-14、8.56×10^-16分别提高到1.50×10^-14、3.50×10^-16,单脉冲星时稳定性的提升也类似.同时发现,综合脉冲星时稳定性在5 yr及以上时间尺度上优于原子钟稳定性,可用于改善当前原子时的长期稳定性.  相似文献   

黄土洞室掘进深度与围岩位移变化规律研究     

时卫民  王鹏  赵尚毅 《岩土工程技术》2020,(2):70-75

应用PLAXIS 2D/3D有限元分析软件,对某黄土洞室进行了二维、三维分步掘进、三维一次掘进等工况的弹塑性有限元分析,研究分析了不同工况下洞室围岩位移的变化规律,并对掌子面的空间效应进行了分析。分析结果表明,二维与三维分步计算的最终位移基本一致,可以用二维的计算结果来估算洞室开挖的最终位移。三维分步掘进的分析表明,不同埋深的洞室其位移比的变化规律基本一致,当L/B<1时(L为掘进深度,B为洞室跨度),位移比呈线性增加;当L/B>1时,位移比呈非线性增加;当L/B>3时,其最大位移接近最终位移。掌子面的空间效应分析表明,在掌子面处的位移约为最终位移的1/3,距掌子面0.5倍跨度处的位移约为最终位移的2/3,距掌子面2.5倍跨度处的位移基本达到了最终位移。  相似文献   

利用爆破事件分析不同速度模型下常规定位方法定位结果     

李兴泉  吴朋  唐淋 《地震地磁观测与研究》2020,(1):25-32

地震定位对速度模型的依赖性很强.四川地区地形复杂,常规工作中可选取多种速度模型进行定位.川西龙门山断裂带为东南部四川盆地和西北部青藏高原东部山区的明显分界线,近年在此断裂带上发生多次较大地震.对发生在该断裂带附近的6个爆破事件和15个天然地震重新定位,并对比结果.研究表明,相同台站包围情况下,川滇3D速度模型稳定性最好,但对浅表爆破不太准确.相比HypoSat(一维速度模型)组合,台站分布对Hypo2000(一维速度模型)和Hypo2000(赵珠速度模型)组合的定位结果影响较大.  相似文献   

海域金矿找矿方法研究——以山东省莱州市三山岛北部海域金矿为例     

田振环 《地质学报》2019,93(S1):19-28

莱州市三山岛北部海域金矿区是世界上第一个查明的海域岩金矿。它通过追索延伸至海域的三山岛断裂，圈定破金找矿靶区。利用海域高精度磁测和浅地层剖面测量配合海上钻探，找到了海域大型金矿。以三山岛海域金矿普查为依托，研究出来的这套海域金矿找矿方法和海上钻探平台，可为今后开展海域金及其它与断裂有关的矿产资源找矿，提供指导和借鉴。  相似文献   

基于低成本单频u-blox接收机的GPS/BDS定向性能分析     

李江卫  马立烨  吴仁攀  孙伟  吴多 《大地测量与地球动力学》2019,39(3):279-284

针对高精度GNSS定向应用场景，通过实验对比对低成本单频u-blox接收机的数据质量和解算精度。结果表明，u-blox接收机GPS、BDS观测值的信噪比略低于测量型接收机；伪距精度分别为0.91 m、0.56 m，相位精度分别为1.35 cm、1.20 cm。在静态观测环境下，u-blox的定向精度可以达到航向0.2°/m和俯仰0.4°/m；动态环境下解算结果稍差，但也可以达到航向0.3°/m和俯仰0.6°/m，略低于高成本测量型接收机单频数据的实时动态定向精度。  相似文献   

Adsorption Mechanism and Kinetic Characterization of Bituminous Coal under High Temperatures and Pressures in the Linxing-Shenfu Area     

TAO Chuanqi  WANG Yanbin  LI Yong  NI Xiaoming  GAO Xiangdong 《《地质学报》英文版》2020,94(2):399-408

The majority of coalbed methane(CBM) in coal reservoirs is in adsorption states in coal matrix pores. To reveal the adsorption behavior of bituminous coal under high-temperature and high-pressure conditions and to discuss the microscopic control mechanism affecting the adsorption characteristics, isothermal adsorption experiments under hightemperature and high-pressure conditions, low-temperature liquid nitrogen adsorption-desorption experiments and CO2 adsorption experiments were performed on coal samples. Results show that the adsorption capacity of coal is comprehensively controlled by the maximum vitrinite reflectance(Ro, max), as well as temperature and pressure conditions. As the vitrinite reflectance increases, the adsorption capacity of coal increases. At low pressures, the pressure has a significant effect on the positive effect of adsorption, but the effect of temperature is relatively weak. As the pressure increases, the effect of temperature on the negative effect of adsorption gradually becomes apparent, and the influence of pressure gradually decreases. Considering pore volumes of pores with diameters of 1.7-100 nm, the peak volume of pores with diameters 10-100 nm is higher than that from pores with diameters 1.7-10 nm, especially for pores with diameters of 40-60 nm, indicating that pores with diameters of 10-100 nm are the main contributors to the pore volume. The pore specific surface area shows multiple peaks, and the peak value appears for pore diameters of 2-3 nm, indicating that this pore diameter is the main contributor to the specific surface area. For pore diameters of 0.489-1.083 nm, the pore size distribution is bimodal, with peak values at 0.56-0.62 nm and 0.82-0.88 nm. The adsorption capability of the coal reservoir depends on the development degree of the supermicroporous specific surface area, because the supermicroporous pores are the main contributors to the specific pore area. Additionally, the adsorption space increases as the adsorption equilibrium pressure increases. Under the same pressure, as the maximum vitrinite reflectance increases, the adsorption space increases. In addition, the cumulative reduction in the surface free energy increases as the maximum vitrinite reflectance increases. Furthermore, as the pressure increases, the surface free energy of each pressure point gradually decreases, indicating that as the pressure increases, it is increasingly difficult to adsorb methane molecules.  相似文献   

An Automatic Method for Detecting Transients and Variable Sources in AST3 Survey Based on Image Subtraction and Random Forest     

《Chinese Astronomy and Astrophysics》2020,44(1):41-60

AST3-2 (the second Antarctic Survey Telescope) is located in Antarctic Dome A, the loftiest ice dome on the Antarctic Plateau. It produces a huge amount of observational data which require a more efficient data reduction program to be developed. Also the data transmission in Antarctica is much difficult, thus it is necessary to perform data reduction and detect variable and transient sources remotely and automatically in Antarctica, but this attempt is restricted by the unsatisfactory performance of the low power consumption computer in Antarctica. For realizing this purpose, to develop a new method based on the existing image subtraction method and random forest algorithm, taking the AST3-2 2016 dataset as the test sample, becomes an alternative choice. This method performs image subtraction on the dataset, then applies the principle component analysis to extract the features of residual images. Random forest is used as a machine learning classifier, and in the test a recall rate of 97% is resulted for the positive sample. Our work has verified the feasibility and accuracy of this method, and finally found out a batch of candidates for variable stars in the AST3-2 2016 dataset.  相似文献   

花岗岩残积土动态冲击性能的SHPB试验研究     

刘新宇  张先伟  岳好真  孔令伟  徐超 《岩土力学》2020,41(6):2001-2008

为研究花岗岩残积土的动态冲击性能，开展了高速冲击下的分离式霍普金森压杆（SHPB）试验，与常规应变率下的试验结果比较，分析了高应变率对花岗岩残积土的应力?应变特性和强度的影响。结果表明：低、高应变率下的花岗岩残积土的?-?a（轴向应力?轴向应变）曲线均呈现出软化型。随着应变率 增加，?-?a曲线向?a增大的方向移动，破坏应变?af增加。但高应变率下?af增加的程度更加明显。花岗岩残积土的峰值强度普遍具有应变率依赖性，二者可用直线关系拟合，但低、高应变率下的拟合关系并不一致。提出了率敏性因子m定量评价依赖性强弱。研究发现，随着应变率的提高，强度的应变率依赖性减弱，低应变率下的m为26.694，而高应变率下仅为0.013。相关试验结果指出，高速冲击荷载对土体总体有害。工程中应该采取合理措施控制冲击荷载的危害。该研究有助于深化花岗岩残积土动态冲击性能的理解，为相关工程的施工与设计提供技术参考。  相似文献