四川米易海塔地区混合岩型铀矿流体包裹体特征     

郭锐  陈友良  刘凯鹏  郑玉文  胡漾 《矿物学报》2020,40(2):137-148

混合岩型铀矿是康滇地轴上最有希望取得找矿突破的铀矿类型,海塔地区的铀矿化即是该类型铀矿的典型代表。本文针对区内的长英质脉矿石、富晶质铀矿石英脉矿石和含矿热液石英脉中的石英流体包裹体进行了研究。结果表明,海塔地区混合岩型铀矿的成矿作用可分为2个阶段:早期混合岩化热液成矿阶段为高温、中低盐度流体,流体包裹体均一温度集中在380~540℃,盐度变化范围为16.15%~23.18%NaCl eqv,是区内铀成矿的主要阶段;晚期热液叠加改造成矿阶段为中低温、低盐度流体,流体包裹体均一温度集中在140~220℃,盐度变化范围为5.56%~23.18%NaCleqv,是区内富铀矿的形成阶段。流体包裹体的气相成分测试表明,长英质脉矿石石英包裹体中以CH4、CO2为主,其次为H2O和N2;而富晶质铀矿石英脉及含矿热液石英脉石英包裹体中以H2为主,部分含有CO2、CH4、H2O。氢、氧同位素研究表明,早期混合岩化成矿阶段的成矿流体可能为岩浆水与变质水的混合,而晚期热液叠加改造成矿阶段成矿流体中可能有大气降水的加入。  相似文献   

斑岩型和浅成低温热液型矿床成矿流体与找矿预测研究:以华南若干典型矿床为例     

倪培  迟哲  潘君屹 《地学前缘》2020,27(2):60-78

斑岩型和浅成低温热液型矿床是全球铜、钼、金、银的主要来源之一,具有重要经济价值。这两类矿床之间通常存在紧密的时空关系,对其成矿流体性质和演化的解剖不仅有利于探究金属沉淀机制,也有助于揭示两者之间的内在成因联系。本文在综述国内外重要研究前沿基础上,以中国华南富家坞斑岩型铜钼(金)矿、桐村斑岩钼矿,以及邱村和安村浅成低温热液金矿为例,系统总结了斑岩型和浅成低温热液型矿床流体特征、演化规律和金属沉淀机制、探讨了从斑岩型到浅成低温热液型流体演化的“气相迁移”模型,并以福建紫金山铜金矿床为例,介绍了应用流体填图进行找矿预测的实例。  相似文献   

SILLS软件在单个萤石流体包裹体LA-ICP-MS微量元素分析数据处理中的应用     

李阳  邹灏  刘行  蒋修未  李蝶 《岩矿测试》2020,39(2):300-310

近年来激光剥蚀电感耦合等离子体质谱(LA-ICP-MS)应用于单个流体包裹体成分定量分析已成为研究流体包裹体的最佳手段之一。该实验过程和数据处理比较复杂,目前国内外采用的数据分析软件为一款基于MATLAB的SILLS软件,该软件主要是对矿物(锆石)、流体包裹体以及熔体包裹体LA-ICP-MS分析结果进行处理。本文以萤石流体包裹体LA-ICP-MS分析为例,阐述了样品制备与流体包裹体的优选方法,对流体包裹体片厚度以及单个流体包裹体的选取要求作了详细描述,对仪器参数设置、内外标样选取和剥蚀方法等进行了说明。基于SILLS软件采用尖峰消除的方法对待处理数据进行校正,对不同种类型的波峰进行峰宽的选取。在元素比值校正和等效盐度计算过程中,由于被测样品是萤石,Ca元素具有较高的背景值,选择以Na作为流体包裹体的内标元素,以Ca作为寄主矿物的内标元素对寄主矿物浓度进行计算,同时提出以电价平衡代替质量平衡进行等效盐度计算。以上方案提高了LA-ICP-MS分析单个萤石流体包裹体的准确性,有助于解释成矿流体来源和矿床成因等问题。  相似文献   

青海共和盆地地热资源热源机制与聚热模式   总被引：2，自引：0，他引：2  

唐显春  王贵玲  马岩  张代磊  刘忠  赵旭  程天君 《地质学报》2020,94(7):2052-2065

青海共和盆地东侧贵德扎仓热田是探讨共和盆地地热资源成因的关键地区。本文综合区域地质、岩石热物性、同位素年代学、水文地球化学和地球物理测量等方法,重点分析了共和盆地的构造背景和热源机制,深入研究了共和盆地地热能系统的关键环节。研究发现:①识别出盆地地壳15 km以下深度发育高导体,并可与新生代青藏高原东部中-下地壳发育的层状低速高导层对比;②近NW-NS向的瓦里贡左旋走滑逆冲断裂是扎仓热田重要的控热和导热断裂;③晚中生代花岗岩与上覆围岩具有显著的热导率;④温泉氢氧同位素指示水源以地表水补给为主;⑤存在浅层新生界碎屑岩中-低温热储和深层花岗岩中-高温热储,发育四层两类地热资源。综合分析提出了共和盆地干热岩三元聚热模式:即新生代中-下地壳发育的高温低速高导层是主要热源,中晚三叠世花岗岩是良好的导热和储热体,既是干热岩母岩,也是热储,新生代低热导率沉积岩是良好的盖层。研究对于青藏高原地热成因、资源预测、开发规划等具有参考意义。  相似文献   

北山造山带中部(甘肃段)花岗岩成因及构造背景   总被引：2，自引：2，他引：0  

白荣龙  刘显凡  周慧玲 《岩石学报》2020,36(6):1731-1754

北山造山带中部花岗岩体以陶勒努图洪岩体和跃进山南岩体为代表,本文对这两个岩体进行了LA-ICP-MS锆石U-Pb定年、全岩地球化学和原位锆石Lu-Hf同位素分析,结果表明:岩体成岩年龄分别为410±2. 8Ma、427±2. 5Ma;主量元素呈现高硅、高钾钙碱性、准铝质-弱过铝质特征;微量元素表现为富集Th、Zr、Hf等及大离子亲石元素(Rb、U、K等),亏损Ba、Sr、Eu及高场强元素(Nb、Ta、P、Ti等);球粒陨石标准化稀土元素曲线呈轻稀土富集、重稀土亏损的右倾模式。综合分析认为跃进山南岩体属A型花岗岩,陶勒努图洪岩体属S型花岗岩。陶勒努图洪和跃进山岩体锆石ε_(Hf)(t)分别为-2. 90～-0. 12(平均值为-1. 53)、-1. 99～2. 82(平均值为0. 26),t_(DM2)分别为1. 41～1. 58Ga、1. 23～1. 54Ga。研究表明:陶勒努图洪黑云母花岗闪长岩岩浆源区主要为由元古界北山杂岩组成的以变质杂砂岩为主的古老地壳物质(含中基性岩石)部分熔融的产物,跃进山南二长花岗岩体可能在元古界北山杂岩组成的以变质杂砂岩为主的古老地壳物质重熔过程中有幔源岩浆的参与。在中志留世(427Ma)明水-小黄山洋已向南侧马鬃山-公婆泉弧之下俯冲至后期,板块后撤引发明水-旱山地体南缘弧后形成裂解环境导致幔源岩浆底侵,诱发地壳物质重熔形成花岗质岩浆,岩浆侵位形成跃进山南二长花岗岩体;至早泥盆世(410Ma),俯冲结束发生弧-陆碰撞造山导致地壳增厚,引发下地壳发生部分熔融产生的花岗质岩浆侵位形成陶勒努图洪岩体;两岩体是在早、晚古生代交接时段同一俯冲-碰撞构造背景下不同部位、不同亚构造环境下的产物。  相似文献   

Evaluating new fault-controlled hydrothermal dolomitization models: Insights from the Cambrian Dolomite,Western Canadian Sedimentary Basin     

Ardiansyah Koeshidayatullah  Hilary Corlett  Jack Stacey  Peter K. Swart  Adrian Boyce  Hamish Robertson  Fiona Whitaker  Cathy Hollis 《Sedimentology》2020,67(6):2945-2973

Fault-controlled hydrothermal dolomitization in tectonically complex basins can occur at any depth and from different fluid compositions, including ‘deep-seated’, ‘crustal’ or ‘basinal’ brines. Nevertheless, many studies have failed to identify the actual source of these fluids, resulting in a gap in our knowledge on the likely source of magnesium of hydrothermal dolomitization. With development of new concepts in hydrothermal dolomitization, the study aims in particular to test the hypothesis that dolomitizing fluids were sourced from either seawater, ultramafic carbonation or a mixture between the two by utilizing the Cambrian Mount Whyte Formation as an example. Here, the large-scale dolostone bodies are fabric-destructive with a range of crystal fabrics, including euhedral replacement (RD1) and anhedral replacement (RD2). Since dolomite is cross-cut by low amplitude stylolites, dolomitization is interpreted to have occurred shortly after deposition, at a very shallow depth (<1 km). At this time, there would have been sufficient porosity in the mudstones for extensive dolomitization to occur, and the necessary high heat flows and faulting associated with Cambrian rifting to transfer hot brines into the near surface. While the δ¹⁸O_water and ⁸⁷Sr/⁸⁶Sr ratios values of RD1 are comparable with Cambrian seawater, RD2 shows higher values in both parameters. Therefore, although aspects of the fluid geochemistry are consistent with dolomitization from seawater, very high fluid temperature and salinity could be suggestive of mixing with another, hydrothermal fluid. The very hot temperature, positive Eu anomaly, enriched metal concentrations, and cogenetic relation with quartz could indicate that hot brines were at least partially sourced from ultramafic rocks, potentially as a result of interaction between the underlying Proterozoic serpentinites and CO₂-rich fluids. This study highlights that large-scale hydrothermal dolostone bodies can form at shallow burial depths via mixing during fluid pulses, providing a potential explanation for the mass balance problem often associated with their genesis.  相似文献   

张宣地区大白阳金矿床包裹体特征及矿床剥蚀保存     

徐渴鑫  申俊峰  李胜荣  黄绍峰  张士全  王业晗 《矿床地质》2020,39(6):1030-1048

华北克拉通破坏及其成矿事件已引起地学界的广泛关注，其中张宣地区是华北克拉通的重要金矿集中区之一，通过对张宣地区大白阳金矿成矿类型、成矿深度及剥蚀保存的探讨，为区内深部找矿提供了重要的参考依据。文章通过流体包裹体研究对大白阳金矿成矿温度及成矿深度进行计算，利用矿物压力计对矿区周边岩体侵位深度进行估算。流体包裹体研究结果显示大白阳金矿成矿温度160~220℃、盐度w（NaCl_eq）=9%~15%，密度0.78~0.97 g/cm³、压力46.3~104.6 MPa，成矿流体主要属于NaCl-H₂O体系，成矿过程中流体温度和盐度都呈现明显的降低趋势。采用黑云母压力计，针对大白阳金矿周边谷嘴子、杨家营以及前坝口花岗质岩体的侵位深度进行估算，并对大白阳金矿自形成以来的剥蚀保存情况进行了探讨，估算结果显示，谷嘴子岩体（236.0 Ma）成岩深度7.02 km、杨家营岩体（138.6 Ma）成岩深度2.66 km、前坝口岩体（140.2 Ma）成岩深度3.13 km。结合前人的裂变径迹结果，认为张宣地区自中生代以来剥蚀速率为0.022~0.029 km/Ma，剥蚀量为3 km。按照前述成矿压力46.3~104.6 MPa换算，大白阳金矿成矿深度6.93 km，剥蚀量小于矿床成矿深度，说明该矿深部仍具有良好的找矿前景。  相似文献   

GPM和TRMM卫星日降水数据在黄河源区的适用性分析     

刘兆晨  杨梅学  王学佳  程立真 《冰川冻土》2020,42(2):575-586

通过评估GPM计划三种日降水产品（IMERG-E、 IMERG-L和IMERG-F）和TRMM卫星、 两种日降水产品（TMPA 3B42和TMPA 3B42RT）在黄河源及其周边区域38个台站的适用性， 探究了五种产品探测精度和海拔高度及雨强的相关关系， 结果表明： 在与实测资料的一致性和偏差方面， GPM卫星产品要全面优于TMPA产品。在TRMM卫星产品中， 3B42产品明显优于3B42RT。五种产品的相关系数均表现出明显的从东南到西北递减的趋势， 均方根误差北部普遍低于南部。IMERG产品的探测率（POD）和探测成功率（CSI）都要普遍高于TMPA产品， 而误报率（FAR）则是TMPA 产品更低， 表现更好。五种产品均在个别台站出现了严重误报的情况， 这些台站主要分布在研究区的西北部。IMERG三种产品对于海拔高度的依赖程度具有很强的一致性， 而3B42RT产品对海拔高度几乎没有依赖。除3B42RT产品外， 其余四种产品的偏差均随雨强的增加而增大。在探测率方面， IMERG产品对小雨、 中雨和大雨的探测能力均优于TMPA产品。  相似文献   

Effects of aperture on Marchenko focussing functions and their radiation behaviour at depth     

Yanadet Sripanich  Ivan Vasconcelos 《Geophysical Prospecting》2019,67(2):443-454

A focussing function is a specially constructed field that focusses on to a purely downgoing pulse at a specified subsurface position upon injection into the medium. Such focussing functions are key ingredients in the Marchenko method and in its applications such as retrieving Green's functions, redatuming, imaging with multiples and synthesizing the response of virtual sources/receiver arrays at depth. In this study, we show how the focussing function and its corresponding focussed response at a specified subsurface position are heavily influenced by the aperture of the source/receiver array at the surface. We describe such effects by considering focussing functions in the context of time-domain imaging, offering explicit connections between time processing and Marchenko focussing. In particular, we show that the focussed response radiates in the direction perpendicular to the line drawn from the centre of the surface data array aperture to the focussed position in the time-imaging domain, that is, in time-migration coordinates. The corresponding direction in the Cartesian domain follows from the sum (superposition) of the time-domain direction and the directional change due to time-to-depth conversion. Therefore, the result from this study provides a better understanding of focussing functions and has implications in applications such as the construction of amplitude-preserving redatuming and imaging, where the directional dependence of the focussed response plays a key role in controlling amplitude distortions.  相似文献   

Experimental study on hydrodynamic performance of SWATH vessels in calm water and in head waves     

《Applied Ocean Research》2019

An extensive experimental investigation on four SWATH hull forms has been conducted in calm water and in regular waves at University of Naples Federico II. Calm water tests have been analyzed in the range of Froude number Fr_T from 0.1 to 0.6. For all four SWATH configurations at the speed, corresponding to Fr_T 0.32, the behaviour in regular waves has been tested. The results of heave, pitch and vertical accelerations are presented in nondimensional form as RAO. For the “most promising” SWATH #4 configuration, a set of stabilizing fins have been designed and an active stabilization system has been developed. The developed SWATH#5 has been tested in calm water on three displacements in the range of Fr_T from 0.1 to 0.65. The dynamic wetted surface has been identified and the residual resistance coefficient C_R as well as R_T/Δ are reported. Seakeeping tests have been performed in regular head sea and in head and following irregular sea at Fr_T = 0.50. The conditions for the occurrence of dynamic longitudinal instabilities have been identified. The results allows to comment the effect of slenderness of struts and SWATH’s immersed bodies on resistance and seakeeping and concerns the applicability of SWATH concept to small craft.  相似文献