水平分支注浆孔卡埋钻事故处理实践          下载免费PDF全文

石逊  刘江  李红梅  伍晓龙  王雷浩 《探矿工程》2020,47(9):33-38

近年来煤矿奥灰治水注浆定向钻进技术发展迅速，多分支超深水平注浆孔数量激增。在水平注浆孔施工过程中，普遍存在地层漏失量大，泥浆突然失返，小径钻孔裸孔段长，水平段孔眼轨迹复杂，控制难度大，靶点技术误差要求严，定向仪器、工具等价格昂贵，施工风险相对较高，极易发生埋钻卡钻事故。一旦发生卡钻事故，就会面临着处理周期长、处理难度大等问题，传统的卡埋钻处理方法在水平注浆孔中应用效果不明显。通过采用空压机输送压缩空气，破坏水平孔着床的沉砂结构，将着床的沉砂吹出孔外或吹入地层裂隙，成功地实现了解卡。总结了水平注浆孔施工中卡埋钻事故的预防措施。  相似文献   

水平低周往复位移下单桩-土相互作用试验研究     

黄福云  陈汉伦  董锐  单玉麟 《岩土力学》2020,41(5):1625-1634

整体式桥台无伸缩缝桥梁（以下简称整体桥）桩基应设计为柔性桩，以保证较好的抗水平变形能力。但是，我国相关规范中判别柔性桩的算法主要应用于单向水平受荷桩，可否沿用至整体桥桩基还有待验证。为此，根据一种特殊设计的桩身变形测量方法，对3根埋深不同的混凝土模型桩进行了低周水平往复位移下的拟静力试验，研究单桩-土体系的抗震性能和相互作用机制。研究表明，水平往复位移下混凝土桩在埋深为3D～6D（D为桩径）范围内开裂；桩的埋深越大，桩身挠曲程度越大、变形特征点位置也越深、桩-土体系的抗弯刚度也越大、水平极限承载力也越高、抗震性能也越强。研究还表明，桩-土体系进入弹塑性阶段后，柔性桩的水平工作性状将逐渐向刚性桩退化。另外，在判别整体桥桩基的水平工作性状时，我国相关规范中的规定偏不安全。实际工程中，建议以Broms方法进行参考计算。  相似文献   

Characteristics of boundary fault systems and its hydrocarbon controlling on hydrocarbon accumulation in Awati Sag,Tarim Basin,China     

《China Geology》2019,2(1):94-107

Based on the interpretation of two-dimensional seismic data, this paper analyzes the characteristics of three boundary fault systems including the Shajingzi fault, the Aqia fault and the Tumuxiuke fault around the Awati sag of the Tarim Basin, and studies its controlling on hydrocarbon accumulation. Neotectonic movement is ubiquitous in oil and gas bearing basins in China, such as Neogene intense activities of large boundary thrusting faults of the Awati sag: Shajingzi fault, Aqia fault and Tumuxiuke fault. Based on a large number of seismic data, it is showed that they have section wise characteristics in the direction of fault strike, and active periods and associated structures formed of different sections are different. Usually, large anticlinal structures are formed in the upper wall, and faulted anticline controlled by companion faults are formed in the bottom wall. Large faults cut the strata from Cambrian up to Neogene. For the anticline in the upper wall, fault activities caused by neotectonic movement played a destructive role in hydrocarbon accumulation, thus the preservation condition is critical for reservoir formation. In this sense, attention should be paid to formations in the upper walls of Aqia fault and Tumuxiuke fault under the Cambrian salt bed, whose plastic deformation could help to heal faults. Companion faults in the bottom wall cut down to the Cambrian and up to the Triassic serving as the pathway for hydrocarbon migration, and associated structures in the bottom wall are noteworthy exploration targets.©2019 China Geology Editorial Office.  相似文献   

Seafloor Geomorphology and Processes on the Western Continental Margin of India based on Multibeam Acoustic Backscatter Data Analysis     

Sumanta Dandapath  Andrew Menezes  Bishwajit Chakraborty  John Kurian  Koppella N. Prudhvi Raju 《Marine Geodesy》2018,41(2):177-200

An assessment of the multibeam sonar data of the central Western Continental Margins of India has been carried out to evaluate the seafloor geomorphology and processes by examining the geomorphological attributes e.g., slope, sediments, structures, etc. associated with geomorphic features. The variation in relief and the features located in the region have been mapped and interpreted collectively by utilizing several geospatial mapping tools. The backscatter strength across the area, apparently congruent with the local relief, has helped to examine the sediment movement on the seafloor. The prominent features found in the region include faults, pockmarks, mounds, submarine terraces, and submerged fossil reefs. Several areas with varying topography engender comparable fractal dimension at short scale breaks, and the probability density functions (PDFs) utilizing backscatter data depicting overlapping classes. The present study highlights how fractals and scale break parameters can be utilized to determine the seafloor processes and associated sedimentological dynamics in a complex geographical environment with strong bottom currents, seasonal upwelling, and faulted structure. The role and impact of the various geomorphic processes on the reworking of sediment movement and the overall progression of the seafloor morphology has been revealed for the first time in this part of the ocean bottom.  相似文献   

Artificial recharge efficiency assessment by soil water balance and modelling approaches in a multi-layered vadose zone in a dry region     

Mojtaba Pakparvar  Hossein Hashemi  Meisam Rezaei  Wim M. Cornelis  Gholamali Nekooeian  Sayyed Ahang Kowsar 《水文科学杂志》2018,63(8):1183-1202

To assess recharge through floodwater spreading, three wells, approx. 30 m deep, were dug in a 35-year-old basin in southern Iran. Hydraulic parameters of the layers were measured. One well was equipped with pre-calibrated time domain reflectometry (TDR) sensors. The soil moisture was measured continuously before and after events. Rainfall, ponding depth and the duration of the flooding events were also measured. Recharge was assessed by the soil water balance method, and by calibrated (inverse solution) HYDRUS-1D. The results show that the 15 wetting front was interrupted at a layer with fine soil accumulation over a coarse layer at the depth of approx. 4 m. This seemed to occur due to fingering flow. Estimation of recharge by the soil water balance and modelling approaches showed a downward water flux of 55 and 57% of impounded floodwater, respectively.  相似文献   

基于UDF的水平轴潮流能水轮机被动旋转水动力性能研究   总被引：1，自引：1，他引：0  

陈文鹏  刘胤超  陈立卫 《海洋工程》2018,36(2):119-126

针对水平轴潮流能水轮机被动旋转问题,基于Fluent 17.0,运用UDF(User Defined Function)控制滑移网格对网格进行动态调整,仿真研究水轮机在不同安放角下被动旋转的水动力特性。通过仿真分析,结果表明:潮流能水轮机随着叶片安放角度的增加,尖速比、输出功率、捕能系数都是先增大后减小,叶片安放角为6°时,叶轮前后速度差最大,对潮流能利用充分,且各项性能均达到最佳;通过分析叶片受力,叶尖叶素在安放角为2°时阻力最大,3°时升力最大,升阻比在6°时最大,此时叶尖叶素升阻比C_L/C_D=6.27、攻角α=3.06°。由仿真结果可知水平轴潮流能叶轮的自启动过程由5个阶段组成,即加速度增大的加速运动段—加速度减小的加速运动段—加速度反向增大的减速运动段—加速度反向减小的减速运动段—稳定运行段,这对潮流能水轮机的设计具有重要的指导意义。  相似文献   

大规模群桩基础水平承载力效应系数计算研究          下载免费PDF全文

贾鹏  王兰民  杨燕  刘上春 《地震工程学报》2020,42(5):1202-1207

桩基础在水平荷载或地震作用下的承载力计算一直是工程界的一个研究难点，近年来随着建筑、桥梁桩基础的规模大幅增加，基于小规模、小比例尺群桩基础水平承载力试验得出来的结论和计算方法可能会不适应新的计算要求，相关的认识和计算方法需要重新论证和更新。本文针对大规模群桩基础水平承载力效应系数的计算问题，首先对国内外研究进展进行调研，发现现有的规范计算方法可能会高估群桩基础的水平承载力。针对这些问题，对大规模群桩基础的水平承载力效应系数进行有限元数值计算分析，探讨水平承载力效应系数的规律，给出相应的计算方法，并与规范计算方法结果进行对比。本文的研究结果可为相应的工程设计问题提供依据，结果的适用性需要今后进一步的检验。  相似文献   

大别山及其周边现今垂直形变研究     

宋尚武  王庆良  郝明  周琳  刘立炜  胡亚轩 《大地测量与地球动力学》2018,38(1):32-35

基于1980年、2005年和2015年3期区域精密水准网观测资料，利用线性动态平差模型计算获取大别山地区水准网长期垂直运动速度场图像。研究发现，淮河平原地表下沉较为严重，大别山呈现弱隆升趋势运动，长江谷地边缘地区较大别山区呈现明显的隆升运动。跨郯庐断裂带水准剖面结果显示，垂直运动与地形呈负相关和弱相关。  相似文献   

2016年射阳M_S 4.4地震前后重力场变化     

吴晓峰  宋浩  代宪鹏  孙君嵩  张辉 《地震地磁观测与研究》2018,40(1):96-101

利用江苏重力测网2014-2017年重力场观测资料，采用绝对重力控制与相对重力联测相结合的平差方法，获取2016年射阳M_S 4.4地震前后重力场变化图。根据射阳M_S 4.4地震前后射阳地区各测线重力段差变化特点，绘制重力场等值线并进行对比分析，结合相关机理，探讨重力场变化与该地震的内在联系。同震观测数据显示：射阳M_S 4.4地震发生在重力异常值高梯度带附近，发震时震中地区位于NS挤压正异常、EW张拉负异常状态，震后区域重力梯度变化量开始减小，是一种典型的重力异常调整现象。  相似文献   

甘肃天水地区渭河南岸大砂沟泥石流发育特征     

祝恩珍  韩帅  孙萍  王刚 《现代地质》2019,33(1):227-234

以天水地区渭河南岸大砂沟泥石流沟为研究对象,通过野外地质调查以及历史资料的统计,初步了解该泥石流的形成条件、松散物源的补给条件、活动历史;详细研究了该泥石流的运动特征,并提出了相应的治理措施。结果表明:该泥石流沟上游三面不稳定斜坡体上的堆积物和大砂沟沟道内的松散堆积物为该泥石流的主要物源;通过统计分析,在极端降雨天气条件下计算得到洪峰流量为355.26 m³/s。该泥石流沟仍存在暴发大规模泥石流的可能性,一旦泥石流发生,将对下游甘谷县城居民的生命财产安全造成严重的威胁。研究成果可为天水地区泥石流的防灾减灾提供科学依据。  相似文献