Exploring the stemflow dynamics and driving factors at both inter- and intra-event scales in a typical subtropical deciduous forest     

Haixia Zhang  Congsheng Fu  Aimin Liao  Can Zhang  Jiufu Liu  Niu Wang  Bin He 《水文研究》2021,35(3):e14091

Numerous efforts have been made to understand stemflow dynamics under different types of vegetation at the inter-event scale, but few studies have explored the stemflow characteristics and corresponding influencing factors at the intra-event scale. An in-depth investigation of the inter- and intra-event dynamics of stemflow is important for understanding the ecohydrological processes in forest ecosystems. In this study, stemflow volume (F_V), stemflow funnelling ratio (F_R), and stemflow ratio (F_%) from Quercus acutissima and Broussonetia papyrifera trees were measured at both inter- and intra-event scales in a subtropical deciduous forest, and the driving factors, including tree species and meteorological factors were further explored. Specifically, the F_V, F_R and F_% of Q. acutissima (52.3 L, 47.2, 9.6%) were lower than those of B. papyrifera (85.1 L, 91.2, 12.4%). The effect of tree species on F_V and F_% was more obvious under low intensity rainfall types. At the inter-event scale, F_V had a strong positive linear correlation with rainfall amount (G_P) and event duration (D_E) for both tree species, whereas F_R and F_% had a positive logarithmic correlation with G_P and D_E only under high-intensity, short-duration rainfall type. F_R and F_% were mainly affected by wind speed and the maximum 30-min rainfall intensity under low-intensity, long-duration rainfall type. At the intra-event scale, for both tree species, the mean lag time between the start of rainfall and stemflow was the shortest under high-intensity, short-duration rainfall type, while the mean duration and amount of stemflow after rain cessation were the greatest under high-amount, long-duration rainfall type. The relationship between stemflow intensity and rainfall intensity at the 5-min interval scale also depended greatly on rainfall type. These findings can help clarify stemflow dynamics and driving factors at both inter- and intra-event scales, and also provide abundant data and parameters for ecohydrological simulations in subtropical forests.  相似文献   

柱顶层间隔震体系增量动力响应研究          下载免费PDF全文

袁梦醒  陈望  刘彦辉  谭平  金建敏 《地震工程学报》2020,42(4):872-880

针对悬臂柱顶有拉梁和无拉梁层间隔震体系的抗震性能问题,运用增量动力分析(IDA)方法进行弹塑性分析,模拟结构从弹性到弹塑性直至最后倒塌的全过程。通过调幅地震动得到相应的层间位移角及峰值加速度,分别绘制单条与多条IDA曲线分析拉梁对隔震结构动力响应的影响,研究两种结构的抗震性能。结果表明:在相同性能点,有拉梁和无拉梁对纤维铰弯矩值和曲率值基本无影响,而在不同性能点,纤维铰状态明显不同;两种体系从正常使用阶段到防止倒塌阶段所需的加速度峰值的差距慢慢增大;在极罕遇地震下,柱顶有拉梁层间隔震体系的下部结构抗震性能要高于柱顶无拉梁层间隔震体系。  相似文献   

地理大数据挖掘——目标、内涵与研究问题     

裴韬  宋辞  郭思慧  舒华  刘亚溪  杜云艳  马廷  周成虎 《地理学报(英文版)》2020,30(2):251-266

  相似文献   

山西省大同市新荣区石墨矿岩石矿物地球化学特征与成因     

梁钰琦  赵永  吴光存  张越  夏庆霖 《地球学报》2020,41(6):827-834

山西省大同市新荣区石墨矿带总体呈北东—南西向展布, 长约22 km, 赋矿层位为中下太古界右所堡组, 岩性为含石墨黑云斜长片麻岩。目前该矿带上已有7个勘查区, 累计查明晶质石墨矿物资源量约 5000万吨, 但对其矿床成因类型研究相对较少。本文收集整理和分析总结了区域内地质资料及化验分析结果, 采用变质岩原岩恢复的四种方法确定该矿带的成因: 从石墨矿带的矿体产状和岩石组合、岩相学和矿物学特征定性判断该矿带矿床为沉积岩区域深变质成矿类型; 矿体样品地球化学微量元素比值(Sr:Ba等)符合副变质岩特征; 稀土元素配分曲线及其研究表明矿体及围岩具有沉积岩变质特征; 以TiO2-F图解、[(al+fm)–(c+alk)]/Si图解以及(al-alk):c图解展示的岩石化学特征半定量地确认新荣区石墨矿带矿床为以黏土岩为主的区域变质成矿。新荣区石墨矿带成因类型的确定填补了该区域矿床成因类型研究的空白, 为下一步地质找矿及建模提供了重要依据; 三种图解相结合, 逐步缩小原岩范围, 锁定原岩类型, 为变质岩原岩恢复及矿床成因研究提供了新的思路和判别方法。  相似文献   

土遗址全长黏结式锚固系统动力响应解析方法     

芦苇  赵冬  李东波  毛筱霏 《岩土力学》2020,41(4):1377-1387

以纵向宽大裂隙引起的夯土城墙遗址稳定问题为背景，建立危险土体?锚杆?稳定土体锚固系统简化力学模型。该模型将土体对锚杆的摩阻作用简化为一个线性弹簧和一个与速度相关的阻尼器的并联机构，将裂隙段锚杆对两侧土体的拉结作用简化为一个线性弹簧。基于弹性体动力理论建立锚固系统动力平衡方程，并推导了锚杆轴力和位移的动力响应解析解。最后，以新疆高昌故城南城墙某段锚固工程为例对提出的解析方法进行了说明，明确了锚杆轴力响应特征及其分布规律，并通过数值分析对其合理性进行了验证。结果表明：在动力作用下同一位置锚杆的轴力响应呈围绕静力平衡位置的波动形态，轴力峰值点位于裂隙附近，且逐渐向临空端和锚固端指数衰减。在考虑地震加速度沿遗址高度的放大效应后能够获得较精确的锚杆轴力响应。  相似文献   

四川米易海塔地区混合岩型铀矿流体包裹体特征     

郭锐  陈友良  刘凯鹏  郑玉文  胡漾 《矿物学报》2020,40(2):137-148

混合岩型铀矿是康滇地轴上最有希望取得找矿突破的铀矿类型,海塔地区的铀矿化即是该类型铀矿的典型代表。本文针对区内的长英质脉矿石、富晶质铀矿石英脉矿石和含矿热液石英脉中的石英流体包裹体进行了研究。结果表明,海塔地区混合岩型铀矿的成矿作用可分为2个阶段:早期混合岩化热液成矿阶段为高温、中低盐度流体,流体包裹体均一温度集中在380~540℃,盐度变化范围为16.15%~23.18%NaCl eqv,是区内铀成矿的主要阶段;晚期热液叠加改造成矿阶段为中低温、低盐度流体,流体包裹体均一温度集中在140~220℃,盐度变化范围为5.56%~23.18%NaCleqv,是区内富铀矿的形成阶段。流体包裹体的气相成分测试表明,长英质脉矿石石英包裹体中以CH4、CO2为主,其次为H2O和N2;而富晶质铀矿石英脉及含矿热液石英脉石英包裹体中以H2为主,部分含有CO2、CH4、H2O。氢、氧同位素研究表明,早期混合岩化成矿阶段的成矿流体可能为岩浆水与变质水的混合,而晚期热液叠加改造成矿阶段成矿流体中可能有大气降水的加入。  相似文献   

郯庐断裂带肥东北部文集地区构造岩类型与构造变形分析     

袁芳  宋传中  LIN ShouF  石永红  李加好  李振伟  王微  王阳阳 《岩石学报》2020,36(2):601-620

位于郯庐断裂带中南部的肥东地区是郯庐断裂带内韧性剪切带出露的主体区域之一。本文从肥东北部文集地区的构造岩组成及其变形入手,通过详细的野外观测、室内显微构造变形分析来确定该地区构造变形的几何学形态及其涡度、有限应变、分维度、差异应力、应变速率等参数。研究区主要出露角闪岩相肥东变质杂岩,构造岩以糜棱岩和糜棱岩化片麻岩为主,岩石变形强烈。根据极摩尔圆法得到的运动学涡度值为0.729~0.870,指示区域内的韧性剪切活动以简单剪切为主。几何学形态上,肥东北部文集地区构造整体呈一背形展出,其枢纽走向NE-SW,轴面倾向SE,物质及变形强度等方面均表现出一定的规律和对称性。研究区内动态重结晶石英颗粒边界具有统计学上的自相似性,其分维值D在1.143~1.208之间,且自背形核部向两翼,颗粒粒径增大,分维值减小。差异应力Δσ介于17.86~55.18MPa之间,应变速率ε值在1.960×10^-13~7.330×10^-12s^-1之间,且背形核部差异应力和应变速率较两翼大,呈近似对称性分布。通过对比以上构造参数可以发现,区内差异应力和应变速率表现出一定的正相关性,自核部向两翼二者均呈减小趋势;动态重结晶石英颗粒则与应变速率呈负相关性,即核部颗粒细小、两翼增大。本文从几何学、运动学以及显微构造变形分析等方面对该区构造变形展开精细化研究,借此来分析肥东北部地区郯庐断裂带的构造形态和运动学特征,这对进一步认识郯庐断裂带的演化过程及构造模型的建立有着重要的意义。  相似文献   

Climatic signals in lacustrine deposits of the Upper Yacoraite Formation,Western Argentina: Evidence from clay minerals,analcime, dolomite and fibrous calcite     

João Paulo B. Gomes  Rodrigo B. Bunevich  Sandra N. Tonietto  Daisy B. Alves  Julice F. Santos  Fiona F. Whitaker 《Sedimentology》2020,67(5):2282-2309

Authigenic clays are an important control on reservoir quality in lacustrine carbonates but remain challenging to predict. Lacustrine depositional systems respond to climatic variations in rainfall, surface runoff and groundwater input, and evaporation, and result in rapid and frequent changes in lake volume; this is expressed through changing water depth and shoreline position. In the upper portion of the Early Palaeocene Yacoraite Formation of the Salta Basin in Argentina, extensive lacustrine deposits were deposited during the sag phase of rifting. Prior high-resolution stratigraphic studies have suggested that climatic factors control microbial carbonate sequences within a ‘balanced fill’ lake, with variation in the lake level having a major influence on facies association changes. This study characterizes the evolution of facies and mineralogy within the Yacoraite Formation, focusing on the distribution of clay minerals, making a link between the high, medium and low-frequency sequence stratigraphic cycles. The low-frequency transgressive hemicycle of the upper portion of the Yacoraite Formation is comprised of abundant siliciclastic facies, suggesting a wetter period. Microbialites occurring in this interval are coarse-grained and agglutinated. Detrital clay minerals such as illite and chlorite and associated siliciclastic sediments were input to the lake during high-frequency transgressive periods. During high-frequency regressive hemicycles, sedimentation was dominated by carbonate facies with Ca-rich dolomite and the authigenic clays are comprised of chlorite/smectite mixed-layers. By contrast, the low frequency regressive hemicycle records fine-grained agglutinated microbialite with horizons of fibrous calcite, more stoichiometric dolomite, barite and authigenic magnesian smectite. This indicates elevated ion concentrations in the lake under intense evaporation during an arid period. Understanding the conditions that are favourable for formation and preservation of authigenic clays within the lacustrine environment can improve understanding of reservoir quality in comparable economically important deposits.  相似文献   

敞开酸溶和偏硼酸锂碱熔ICP-MS法测定多金属矿中的稀土元素及铌钽锆铪   总被引：2，自引：2，他引：0  

门倩妮  沈平  甘黎明  冯博鑫 《岩矿测试》2020,39(1):59-67

用电感耦合等离子体质谱法(ICP-MS)测定地质样品中的稀土及难熔元素,混合酸敞开酸溶法和碱熔融法是两种主要的溶样方法。但地质样品组分复杂,元素之间存在相互共生的现象,对于特殊元素、特殊样品用传统酸溶法会造成部分元素消解不完全,使测定结果不准确;而碱熔法的操作过程繁琐,且溶液盐度高,易产生基体干扰和堵塞仪器进样系统。本文改进了传统四酸和五酸体系,采用氢氟酸-硝酸-硫酸敞开酸溶体系,用国家一级标准物质制作标准曲线测定15种稀土元素,方法准确度(ΔlgC)为0.001～0.027。同时改进了偏硼酸锂碱熔法,样品用偏硼酸锂碱熔提取,加入氢氧化钠调节溶液至碱性条件,所测元素与偏硼酸锂共沉淀后过滤分离熔剂,再用硝酸复溶测定15种稀土元素及铌钽锆铪。两种溶样方法的测定值与认定值的相对误差为1.09%～9.30%。将混合酸敞开酸溶法测定稀土元素、偏硼酸锂碱熔法测定铌钽锆铪的结果与其他实验室密闭酸溶法相比,两组数据的相对偏差为0.13%～15.32%。本实验表明,混合酸敞开酸溶法适用于测定地质样品中的稀土元素,偏硼酸锂碱熔法不仅适用于测定地质样品中的稀土元素及铌钽锆铪,也适用于测定如古老高压变质岩石及铝含量高的样品中的铌钽锆铪。  相似文献   

Three-dimensional active earth pressure from cohesive backfills with tensile strength cutoff     

Zheng-Wei Li  Tian-Zheng Li  Xiao-Li Yang 《国际地质力学数值与分析法杂志》2020,44(7):942-961

Most of previous analyses on the active earth pressure were performed in two-dimensional cases using the Mohr-Coulomb (M-C) failure function to describe the soil strength. However, all failures of retained slopes indicate a somewhat three-dimensional (3D) feature, and the M-C function is found to overestimate the tensile strength of cohesive soil. In this work, a kinematic limit analysis–based approach is developed for computing the 3D active earth pressure resulting from cohesive backfills. The concept of tensile strength cutoff is adopted to implement the reduction or elimination of tensile strength from the strength envelope. An extended 3D horn failure mechanism that is associated with the modified strength envelope is developed to characterize the collapse of retained slopes. The resultant of active earth pressure is evaluated from the work rate balance equation and expressed as an unfactored coefficient. The obtained results indicate that less support provided by the wall is required when allowing the existence of soil cohesion and 3D effects and that eliminating the tensile strength can observably increase the active earth pressure, especially for the backfill with a great level of cohesion.  相似文献