南黄海CSDP-2井晚泥盆世早期真蕨类Shougangia的形态观察     

白姣  徐洪河  郭兴伟  卢辉楠 《吉林大学学报(地球科学版)》2019,49(1):65-73

南黄海CSDP-2钻井上泥盆统五通组擂鼓台段2 068.00~2 069.02 m段岩心识别出了早期真蕨类植物。该植物具有至少三次羽状复叶，末二次羽片互生，小羽片扁平，呈扇状、楔状或舌状，基部收缩，至少一次深裂，裂片边缘钝圆，二分叉的叶脉明显。据此，可鉴定为优美守刚蕨（比较种）（Shougangia cf.S.bella）。本研究为南黄海地区上泥盆统五通组增加了古植物学新资料。  相似文献   

中-哈-吉-乌天山变形带容矿金矿床:成矿环境和控矿要素与找矿标志     

薛春纪  赵晓波  赵伟策  赵云  张国震  Bakhtiar NURTAEV  Nikolay PAK  莫宣学 《地学前缘》2020,27(2):294-319

天山是全球第二大金矿富集区,世界级和大型-超大型金矿床东西成带横贯中国新疆中部—哈萨克斯坦东南部—吉尔吉斯斯坦—乌兹别克斯坦,构成巨型跨境金成矿带。天山巨型跨境金成矿带和重要金矿床形成的地质环境、成矿的控制要素、找矿勘查的标志都是学术界和工业界高度关注的重大地质和找矿问题。通过广泛、深入地文献调研和境内外天山较全面野外地质矿产调查与研究,本文认为中-哈-吉-乌天山大规模金成矿主体形成于晚石炭世—早二叠世古亚洲洋闭合后的陆块拼贴变形过程,部分形成于中—晚二叠世陆内走滑变形过程。中天山南、北缘古缝合带及其附近的大型脆性/韧-脆性变形带是巨量金成矿的关键控制因素,多期叠加复合成矿是天山变形带容矿金矿床的显著特征。地壳初始富集、构造变形活化、岩浆热液叠加是天山变形带容矿金矿床的主控因素。“碳质细碎屑岩+脆韧性变形带+海西末期岩体”是中-哈-吉-乌天山变形带容矿大型-超大型金矿的找矿标志组合。  相似文献   

江西东坪石英脉型黑钨矿矿床地质特征、控矿因素及找矿标志     

杨细浩  胡文洁  钟起泓  朱昌杰  万欢  胡正华 《吉林大学学报(地球科学版)》2019,49(5):1301-1316

东坪钨矿床是近年在赣北地区新发现的首个超大型石英脉型黑钨矿矿床，位于长江中下游成矿带幕阜山地区东坪-香炉山钨矿找矿远景区东部。矿床赋矿层位为新元古代双桥山群安乐林组浅变质岩系，北东向断裂及其两侧的次级裂隙为区内主要控矿构造、容矿构造，隐伏的燕山晚期黑云母二长花岗岩为成矿岩体，与区内钨多金属成矿关系密切的为石英脉状硅化；两个矿带的钨矿体均产于成矿岩体外接触带，呈现了石英脉型黑钨矿矿床典型的"五层楼"分带特征，矿石工业类型主要为黑钨矿矿石；明确了构造和岩浆岩等主要控矿因素；总结出地表微细裂隙云英岩化-黄铁矿化蚀变带、含硫化物石英细脉带、石英脉、重砂及地球化学异常为区内主要找矿标志。  相似文献   

RESEARCH ON PASSIVE SERVO SEISMIC ROTATIONAL ACCELERATION SENSOR WITH LARGE DAMPING     

QU Ming-zhe  GAO Feng  YANG Xue-shan  YANG Dong-xia 《地震地质》2018,40(5):1170-1178

Many strong motion records show that under the strong seismic vibration of, the torsional disfigurement of building structures is a common and serious damage. At present, there are no special sensors for measuring seismic rotation in the world. Most of the experts obtain rotational components through observing deformation, theoretical analysis and calculation. The theory of elastic wave and source dynamics also prove the conclusion that the surface of the earth will rotate when an earthquake occurs. Based on a large number of investigations and experiments, a rotational acceleration sensor was developed for the observation of the rotational component of strong ground motions. This acceleration sensor is a double-pendulum passive servo large-damped seismic rotational acceleration sensor with the moving coil transducer. When an earthquake occurs, the seismic rotational acceleration acts on the bottom plate at the same time. The magnetic circuit system and the middle shaft fixedly connected to the bottom plate follow the bottom plate synchronous vibration, and the moving part composed of the mass ring, the swing frame and the moving ring produces relative corners to the central axis. The two working coils mounted on the two pendulums produce the same relative motion with respect to the magnetic gaps of the two magnetic circuits. Both working coils at this time generate an induced electromotive force by cutting magnetic lines of force in the respective magnetic gaps. The generated electromotive forces are respectively input to respective passive servo large damper dynamic ring transducer circuits and angular acceleration adjusting circuits, and the signals are simultaneously input to the synthesizing circuit after conditioning. Finally, the composite circuit outputs a voltage signal proportional to the seismic rotational acceleration to form a seismic rotational acceleration sensor. The paper presents the basic principles of the rotational acceleration sensor, including its mechanical structure diagram, circuit schematic diagram and mathematical models. The differential equation of motion and its circuit equation are derived to obtain the expressions of the main technical specifications, such as the damping ratio and sensitivity. The calculation shows that when the damping ratio is much larger than 1, the output voltage of the passive servo large damping dynamic coil transducer circuit is proportional to the ground rotation acceleration, and the frequency characteristic of bandpass is wider when the damping ratio is larger. Based on the calibration test, the dynamic range is greater than or equal to 100dB and the linearity error is less than 0.05%. The amplitude-frequency characteristics, the phase-frequency characteristics and their corresponding curves of the passive servo rotational acceleration sensor are acquired through the calculations. Based on the accurate measurement of the micro-vibration of the precision rotating vibration equipment, the desired result is obtained. The measured data are presented in the paper, which verify the correctness of the calculation result. The passive servo large damping rotational acceleration sensor has simple circuit design, convenient operation and high resolution, and can be widely applied to seismic acceleration measurement of earthquake or structure.  相似文献   

Correspondence between the large volcanic eruptions and ENSO events over AD 1525–2000     

Fang  Xiuqi  Zheng  Xue  Zhang  Xing 《地理学报(英文版)》2020,30(1):103-118

ENSO is an interannual mode which may be affected by external forcing, such as volcanic eruptions. Based on the reconstructed volcanic eruptions chronology and ENSO sequences, both 195 large volcanic eruptions(VEI≥4) and 398 ENSO(El Ni?o and La Ni?a) events were extracted from 1525 to 2000. An analysis of the correspondence between the large volcanic eruptions and ENSO events was performed by matching the large volcanic eruptions with the types and magnitudes of ENSO events present in the 0–2 years after the eruptions. The results show the following:(1) The percentages of ENSO events within the 3 years after the large eruptions had increased to 68.3% from 31.7% compared with those with no-eruptions in the previous 0–2 years. In addition, the ratio of El Ni?o to La Ni?a events turned from 2:3 to 1:1, and more El Ni?o events occurred in the 0 year after eruptions in the low-latitudes of the Northern Hemisphere and in the tropics but more La Ni?a events occurred in the 0 year after in the high-latitudes of the Northern Hemisphere and the Southern Hemisphere.(2) After the eruptions, the weak(W) El Ni?o events had increased by 8 percentage points and the very strong(VS) El Ni?o events had decreased by 10 percentage points; conversely, there was a decrease by 15 percentage points of the weak La Ni?a events and an increase by 11.4 percentage points of the very strong La Ni?a events. Specifically, the percentages of strong La Ni?a events increased to a peak at 1(+1) year after the eruptions.(3) The percentage of eruptions followed by single-year ENSO was the greatest. The percentage of ENSO events that occurred in the consecutive 2 years following an eruption was approximately equal to the percentage of events that occurred consecutively 3 years following an eruption, and both sets of ENSO magnitudes showed a decreasing trend.  相似文献   

水源钻机在超深土层绳索取心钻进中的应用          下载免费PDF全文

杨联锋  段云星 《探矿工程》2020,47(11):44-50

山西省清徐县区域地质调查项目设计800、2000、3000 m科学钻探孔，以调查填补新生界底板埋深控制空白区，各孔钻入基岩30 m完钻。要求全孔取心，岩心采取率≮85%，岩心直径≮60 mm，采用塑料保护管采取原状岩样。针对超深软土层、各组地层特性及厚度未知、钻遇基岩完钻深度未知、大直径高保真全孔取心、项目价格远低于目前市场成本等难题，经过“水源钻机+大提钻取心+长裸眼孔段”实施800 m孔、“岩心钻机+绳索取心+套管固井”实施640 m参数对比孔，创新性使用“水源钻机+绳索取心+长裸眼孔段”工艺完成了2000 m孔的施工。该工艺岩心采取率达到93%，孔径和孔斜符合地质要求，为3000 m孔顺利施工打下了坚实的基础，为同类型项目提供了经验和借鉴。  相似文献   

大规模群桩基础水平承载力效应系数计算研究          下载免费PDF全文

贾鹏  王兰民  杨燕  刘上春 《地震工程学报》2020,42(5):1202-1207

桩基础在水平荷载或地震作用下的承载力计算一直是工程界的一个研究难点，近年来随着建筑、桥梁桩基础的规模大幅增加，基于小规模、小比例尺群桩基础水平承载力试验得出来的结论和计算方法可能会不适应新的计算要求，相关的认识和计算方法需要重新论证和更新。本文针对大规模群桩基础水平承载力效应系数的计算问题，首先对国内外研究进展进行调研，发现现有的规范计算方法可能会高估群桩基础的水平承载力。针对这些问题，对大规模群桩基础的水平承载力效应系数进行有限元数值计算分析，探讨水平承载力效应系数的规律，给出相应的计算方法，并与规范计算方法结果进行对比。本文的研究结果可为相应的工程设计问题提供依据，结果的适用性需要今后进一步的检验。  相似文献   

车载移动测量系统大比例尺测图精度控制研究     

李俊  王永红  吴波  侯兴泽 《测绘与空间地理信息》2020,(3):101-103

车载移动测量系统作为一种先进的测绘技术,已广泛应用于大比例尺测图项目中。SSW车载激光建模测量系统能够快速、高效、精确地完成大比例尺测图数据采集、处理等工作。不同比例尺对精度的要求不一样,而本文选择若干试验区,探讨不同的数据采集与处理方式对精度的影响,然后制订相应的精度控制方案,提高数据的精度,满足1∶1 000比例尺测图要求。  相似文献   

Event-based classification for global study of river flood generating processes     

Lina Stein  Francesca Pianosi  Ross Woods 《水文研究》2020,34(7):1514-1529

Better understanding of which processes generate floods in a catchment can improve flood frequency analysis and potentially climate change impacts assessment. However, current flood classification methods are either not transferable across locations or do not provide event-based information. We therefore developed a location-independent, event-based flood classification methodology that is applicable in different climates and returns a classification of all flood events, including extreme ones. We use precipitation time series and very simply modelled soil moisture and snowmelt as inputs for a decision tree. A total of 113,635 events in 4155 catchments worldwide were classified into one of five hydro-climatological flood generating processes: short rain, long rain, excess rainfall, snowmelt and a combination of rain and snow. The new classification was tested for its robustness and evaluated with available information; these two tests are often lacking in current flood classification approaches. According to the evaluation, the classification is mostly successful and indicates excess rainfall as the most common dominant process. However, the dominant process is not very informative in most catchments, as there is a high at-site variability in flood generating processes. This is particularly relevant for the estimation of extreme floods which diverge from their usual flood generation pattern, especially in the United Kingdom, Northern France, Southeastern United States, and India.  相似文献   

利用BDS与无人船进行污染源分析及处理     

姜沣珊  岳中杨  程俊颖  赵泽阳 《测绘通报》2020,(2):155-159

在大数据的背景下，充分利用北斗卫星导航系统（BDS）的定位功能，以无人船作为用户端，在水质数据采集和污染源位置的问题中积极探索新的实践方案，迅速、准确地找到污染源，减少河流污染物污染的时间，且无人船上装有净化模块，在发现污染时可作简易处理。在无人船上安装水质分析仪，水质分析仪的传输模块中安装经给防水处理的北斗卫星定位芯片和WiFi数据传输器，进而对河流的污染物种类及浓度进行分析，并采用大数据的计算方法，计算出污染源位置，向云平台反映污染源位置分析结果与污染物处理方法。通过BDS，将数据按照位置区域划分，并将能到达污染源的最短路径发送到处理人的移动设备上。本文通过对基于BDS定位的水质污染监测可视化系统进行分析，以期迅速找出污染源，减少水质污染现象的发生。  相似文献