欠固结地层静止侧压力简化计算方法     

乔亚飞  逯兴邦  黄俊  丁文其 《岩土力学》2020,41(11):3722-3729

大量工程实践表明：正确预估欠固结地层的静止侧压力大小对工程的稳定性分析和安全设计十分重要。因此，通过理论分析和数值模拟深入探讨了固结排水过程中地层侧向压力的变化规律，建立了静止侧压力与超固结比OCR的联系，提出了等效静止土压力系数的概念和计算公式，形成了考虑OCR影响的欠固结地层静止侧压力简化计算方法，并用数值模拟和试验结果进行了验证。提出的等效静止土压力系数实现了欠固结地层和正常固结地层侧压力计算的统一。研究结果表明：欠固结地层的静止侧压力随超固结比OCR的增大而线性减小，且随土体有效内摩擦角的增大，OCR对侧向压力的影响越大。上述研究成果可为欠固结地层的土压力计算提供技术支撑。  相似文献   

Soil resistances for laterally loaded rigid piles in multi-layered elastic soil     

Bipin K. Gupta 《Geomechanics and Geoengineering》2020,15(1):10-28

ABSTRACT

Short stubby piles like monopiles and large diameter drilled shafts undergo rigid body translation and rotation when subjected to a lateral force and/or a moment at the head. A method of analysis for these piles embedded in multi-layered elastic soil is developed using the variational principles of mechanics. Using this analysis, the soil resistance against pile movement can be rigorously related to the soil elastic constants, and the pile head displacement and rotation can be quickly calculated. The equilibrium equations for pile and soil displacements are obtained using the principle of virtual work and solved using an iterative algorithm. Pile responses obtained from the analysis match well with those obtained from three-dimensional finite element analyses in which the same inputs of loads, geometry, and material properties are given. Based on the new analysis, fitted equations for soil resistance parameters are developed, which can be used to directly calculate the pile head displacement and rotation without the use of the iterative algorithm. Numerical examples are provided that demonstrate how the method can be used to analyse practical problems.  相似文献   

Development of the cyclic p–y curve for a single pile in sandy soil     

Sung-Ha Baek  Joonyoung Kim  Seung-Hwan Lee 《Marine Georesources & Geotechnology》2018,36(3):351-359

Pile foundations that support transmission towers or offshore structures are dominantly subjected to cyclic lateral load induced by wind and waves. For a successful design, it is crucial to investigate the effect of cyclic lateral loads on the pile behavior that is loaded laterally. Although the p–y curve method is generally utilized to design the cyclic laterally loaded pile foundations, the effect of cyclic lateral loads on the pile has not been properly implemented with the p–y curve. This reflects a lack of consideration of the overall stiffness change in soil–pile interaction. To address this, a series of model pile tests were conducted in this study on a preinstalled aluminum flexible pile under various sandy soil conditions. The test results were used to investigate the effect of cyclic lateral loads on the p–y behavior. The cyclic p–y curve, which properly takes into account this effect, was developed as a hyperbolic function. Pseudo-static analysis was also conducted with the proposed cyclic p–y curve, which showed that it was able to properly simulate cyclic laterally loaded pile behavior in sandy soil.  相似文献   

脐带缆螺旋滑移分析及力学性能研究   总被引：1，自引：0，他引：1  

李英  吴潘  冯雅萍  曹静萱 《海洋工程》2018,36(6):58-68

针对脐带缆内部螺旋层,应用Darboux标架建立螺旋结构空间坐标系,推导弯曲载荷下螺旋结构的局部变形和滑移。考虑螺旋构件间的接触和摩擦作用,建立螺旋结构的受力平衡偏微分方程,并研究螺旋角和摩擦系数对螺旋结构滑移的影响。基于同层螺旋结构本构关系相同假设,将所有螺旋结构力学性能线性叠加,拟合脐带缆整体弯曲刚度。运用建立的理论解析方法,对某双层铠装脐带缆的力学性能进行研究,并与数值模拟结果进行对比验证。对比结果表明,理论解析得到的螺旋滑移结果与数值模拟结果一致,理论解析得到的脐带缆弯曲刚度与数值模拟结果在全滑动阶段比较接近。  相似文献   

Response and capacity of monopod caisson foundation under eccentric lateral loads     

Tanmoy Kumar Deb  Baleshwar Singh 《Marine Georesources & Geotechnology》2018,36(4):452-464

Monopod caisson foundation is a viable alternative for supporting offshore wind turbines located at shallow water depths. This foundation system has to resist overturning moment generated due to resultant lateral load, arising from wind and water wave action, that can act at any loading height above the seabed. This paper presents results of a numerical investigation performed to determine the influence of loading height, caisson geometry and superstructure load on the ultimate lateral capacity, initial stiffness, and soil failure zone of the foundation, when installed in very dense sand. Both the ultimate and serviceable states of the caisson foundation obtained from the analyses are represented in terms of envelopes plotted between lateral load and overturning moment. Simplified expressions, which take into account the influence of caisson geometry, loading height, and soil properties, are also presented to serve as a preliminary base for design of the monopod caisson foundation.  相似文献   

Lateral cyclic response of an aluminum model pile in sand     

Jiunn-Shyang Chiou  Zhi-Wei Xu  Cheng-Chang Tsai  Jin-Hung Hwang 《Marine Georesources & Geotechnology》2018,36(5):554-563

Lateral cyclic load tests were performed on an aluminum model pile in dry sand. Two levels of loading were adopted to represent different service load conditions. The maximum number of loading cycles was 1,000. From the test results, it was found that the even though in the service load condition, the pile response was still affected by cyclic effects and a larger load level would produce more significant influence. In a global point of view, the lateral displacement and maximum moment increased with loading cycles, while the secant stiffness within a cycle decreased with cycles. The cyclic effect was more significant on the lateral displacement than on the moment. In a local point of view, cyclic loading would degrade the equivalent subgrade stiffness for the soil shallower than about seven times diameter. In addition, the secant subgrade stiffness within a cycle increased with loading cycles. Some experimental relationships of lateral pile response and loading cycles were built and compared with those in the literature.  相似文献   

岩石膨胀性试验注意事项探讨     

刘军  谷莉  郭程  卓慧英 《岩土工程技术》2020,(2):117-121

从室内试验的角度来探讨几类工程勘察中岩石常用膨胀性试验(自由膨胀率、膨胀力、侧向约束膨胀率、耐崩解)的注意事项,从野外取样、标准样品制取、试验操作、方法选择等方面进行了论述,力求减小试验误差,提高膨胀岩的试验水平,保证试验结果的准确性,并使膨胀岩膨胀性指标的测定方法更臻完善。  相似文献   

Dynamic loading tests and seismic response analysis of a stud-type damper composed of multiple friction units with disc springs     

Takeshi Sano  Kazutaka Shirai  Yasumasa Suzui  Yoshikazu Utsumi 《地震工程与结构动力学》2020,49(13):1259-1280

This paper presents an experimental study on the performance of a shear-sliding stud-type damper composed of multiple friction units with high-tension bolts and disc springs. A numerical evaluation of the response reduction effects achieved by the stud-type damper is also presented. In dynamic loading tests, the behavior of stud-type multiunit friction damper specimens was investigated. Three different full-scale damper specimens, which were composed of five, six, or seven friction units with two or four sliding surfaces, were incorporated into loading devices for testing. The stud-type friction dampers demonstrated stable rigid-plastic hysteresis loops without any remarkable decrease in the sliding force even when subjected to repetitive loading, in addition to showing no unstable behavior such as lateral buckling. The damper produced a total sliding force approximately proportional to the number of sliding surfaces and friction units. The total sliding force of the stud-type damper can thus be estimated by summing the contributions of each friction unit. In an earthquake response simulation, the control effects achieved by stud-type dampers incorporated into an analytical high-rise building model under various input waves, including long-period, long-duration and pulse-like ground motions, were evaluated. A satisfactory response reduction was obtained by installing the developed stud-type dampers into the main frame without negatively impacting usability and convenience in terms of building planning.  相似文献   

Self-centering friction spring dampers for seismic resilience     

Wei Wang  Cheng Fang  Yashuo Zhao  Richard Sause  Shuling Hu  James Ricles 《地震工程与结构动力学》2019,48(9):1045-1065

  相似文献   

建筑在强震下横拉承压力钢筋负荷测量          下载免费PDF全文

任燕娟 《地震工程学报》2018,40(4):692-697

在强震状态下,建筑物的横拉承压受力较为复杂,另外由于建筑物形状及在地震中受力面积大小不同,在强震下造成碰撞大小影响不一导致其横拉承压力的随机复杂性十分突出。传统的建筑承压负荷检测方法中钢筋负荷受力测量能力不足,检测结果易出现误差。将建筑钢筋的机械性能设为理想弹塑性,利用建筑物横拉承压力钢筋负荷测量方法,对不同结构、不同工况的建筑钢筋载荷的变化规律进行测试分析,结合建筑局部承压特点和整体结构聚力方式,设计横拉承压力钢筋负荷检测方法,并进行仿真实验,结果表明该方法模型所得数据更加精准,有良好的适用性。  相似文献