脐带缆螺旋滑移分析及力学性能研究   总被引：1，自引：0，他引：1  

李英  吴潘  冯雅萍  曹静萱 《海洋工程》2018,36(6):58-68

针对脐带缆内部螺旋层,应用Darboux标架建立螺旋结构空间坐标系,推导弯曲载荷下螺旋结构的局部变形和滑移。考虑螺旋构件间的接触和摩擦作用,建立螺旋结构的受力平衡偏微分方程,并研究螺旋角和摩擦系数对螺旋结构滑移的影响。基于同层螺旋结构本构关系相同假设,将所有螺旋结构力学性能线性叠加,拟合脐带缆整体弯曲刚度。运用建立的理论解析方法,对某双层铠装脐带缆的力学性能进行研究,并与数值模拟结果进行对比验证。对比结果表明,理论解析得到的螺旋滑移结果与数值模拟结果一致,理论解析得到的脐带缆弯曲刚度与数值模拟结果在全滑动阶段比较接近。  相似文献   

Influence of Structural Non-Stationarity of Surface Roughness on Morphological Characterization and Mechanical Deformation of Rock Joints   总被引：2，自引：2，他引：0  

N. Fardin 《Rock Mechanics and Rock Engineering》2008,41(2):267-297

Summary Structural non-stationarity of surface roughness affects accurate morphological characterization as well as mechanical behaviour of rock joints at the laboratory scale using samples with a size below the stationarity threshold. In this paper, the effect of structural non-stationarity of surface roughness is investigated by studying the scale dependence of surface roughness and mechanical behaviour of rock joints. The results show that the structural non-stationarity mainly affects the accurate characterization of the surface roughness of the fracture samples. It also controls the amount and location of the contact areas during shear tests, which in turn affects the mechanical properties and asperity degradation of the samples. It is concluded that for accurate determination of the morphological and mechanical properties of rock joints at laboratory and field scales, samples with size equal to or larger than the stationarity threshold are required. Author’s address: Nader Fardin, Rock Mechanics Group, Department of Mining Engineering, Faculty of Engineering, University of Tehran, P.O. Box: 11365/4563, Tehran, Iran  相似文献   

气举反循环采矿方法单井试验及应用探讨     

周团正  杨述起  王自强  张西坤 《探矿工程》2008,35(6):19-22

湖南道县一个矿区,铁锰矿体储量约2200万t。由于复杂的水文地质和工程地质条件,从20世纪70年代发现后,一直没有开采。笔者通过多年大直径工程井的实践经验,查阅国内外资料后,提出了钻井-气举反循环法试开采的方法,并在现场进行了单孔开采试验,获得了比较满意的效果。以该矿体Ⅱ号矿为例,介绍了钻井-气举反循环法采矿的适用条件、工艺过程以及试采情况,并就以后大面积开采提出了若干技术措施。  相似文献   

Current trends of space occupation by encrusting excavating sponges on Colombian coral reefs   总被引：1，自引：0，他引：1  

Mateo López-Victoria  & Sven Zea 《Marine Ecology》2005,26(1):33-41

Some sponges of the genus Cliona (Porifera, Hadromerida, Clionidae) simultaneously excavate and encrust calcareous substratum, competing aggressively for illuminated space with corals and other organisms. To interpret current trends of reef space occupation, the patterns of distribution and size of three Caribbean species were examined at San Andrés Island and Islas del Rosario in Colombia. While Cliona aprica was ubiquitous, C. caribbaea (= C. langae) preferred deep and protected reef zones, and C. tenuis shallow and wave‐exposed settings. In contrast to the effect on other excavating sponges, chronic exposure to raw sewage did not significantly increase the abundance of the studied sponges. Substratum occupation/availability ratios showed a positive tendency of the sponges toward certain coral skeletons, and a negative or neutral tendency toward calcareous rock, indicating that establishment may be easier on clean, recently dead coral than on older, heavily incrusted substratum. High relief generally limits sponge size to that of the illuminated portions of the substratum. A generally lower proportion of small individuals than of larger ones indicates currently low recruitment rates and low subsequent mortality. Successful events of higher recruitment seem to have occurred for C. tenuis. These are related to the massive acroporid coral die‐off in the early 1980s and to asexual dispersion during storms, resulting in a current 10% substratum cover. Reefs with high coral mortality were and/or are thus more susceptible to colonization and subsequent space occupation by these sponges, although relief may prevent space monopolization.  相似文献   

A Compact Explicit Difference Scheme of High Accuracy for Extended Boussinesq Equations     

周俊陶林建国  谢志华 《中国海洋工程》2007,21(3):507-514

Presented here is a compact explicit difference scheme of high accuracy for solving the extended Boussinesq equations.For time discretization,a three-stage explicit Runge-Kutta method with TVD property is used at predicting stage,a cubic spline function is adopted at correcting stage,which made the time discretization accuracy up to fourth order;For spatial discretization,a three-point explicit compact difference scheme with arbitrary order accuracy is employed.The extended Boussinesq equations derived by Beji and Nadaoka are solved by the proposed scheme.The numerical results agree well with the experimental data.At the same time,the comparisons of the two numerical results between the present scheme and low accuracy difference method are made,which further show the necessity of using high accuracy scheme to solve the extended Boussinesq equations.As a valid sample,the wave propagation on the rectangular step is formulated by the present scheme,the modelled results are in better agreement with the experimental data than those of Kittitanasuan.  相似文献   

淮南刘庄煤矿地基人工冻融土工程性质与中微观结构之间关系研究     

樊庭瑞  崔可锐  周帆 《安徽地质》2008,18(3)

以淮南刘庄煤矿主井地基的人工冻融土为研究对象,以偏光显微镜,扫描电镜（SEM）为主要研究手段,研究分析了人工冻融土与原状土的中微观结构、冻融前后的中微观结构的变化规律及内在原因。此外,还研究分析了人工冻融土冻融前后的中微观结构及其变化与人工冻融土的物理、力学、工程性质之间的关系。研究显示中微观结构对人工冻融土的物理、力学、工程性质有很大的影响,冻融前后中微观结构的变化受到土的种类、埋深、原状土的中微观结构等因素的影响,且冻融前后的中微观结构的变化在一定程度上主导了冻融前后的物理、力学、工程性质的改变。  相似文献   

温度-渗流-应力耦合作用分类     

贺玉龙  杨立中 《四川地质学报》2008,28(3):211-215

根据耦合作用实现方式的不同,将温度-渗流-应力耦合作用分为“力学”耦合和“参数”耦合两大类,“力学”耦合通过场之间的某种力学作用或过程实现,而“参数”耦合则通过场的控制参数的变化而体现出来。  相似文献   

被动震源进行地震勘探的可行性研究     

唐德林马文琪  胡宗正王艳伶 《中国煤炭地质》2008,20(2):46-48

为研究冲击钻机、打桩机、打夯机以及筑路机等设备工作时产生的震源,对开展工程地震勘探时的利用价值,在东庞矿2093工作面治水钻孔冲击钻进过程中进行了该项实验工作。试验采用WF-1006遥测数字地震仪及CGS-40型加速度检波器,接收排列之间方位角间隔20。,接收道数24道,道距5m,采样率1ms,记录长度2s。最近检波器距钻孔7m。利用SCHRAMM钻机产生的强大振动为被动震源,进行了250m、257m、183m、263m等不同钻井深度,以及与此相对应不同方位角（250°、250°、230°275°）的地震波接收试验。通过分析其地震记录,判定引发东庞矿矿井突水的陷落柱中心位于治水钻孔西南方向。该结论与三维地震勘探确定的陷落柱位置一致,可见通过选择合理的接收方式及参数,被动震源也能够用于地震勘探。  相似文献   

机械设备安装测量检验     

张晓东 《地理空间信息》2008,6(1):103-105

介绍了在建筑场地及厂房内部无控制网的情况下,利用精密工程测量的手段和方法,检验校正设备,提高安装精度,解决设备安装后存在的安装定位不精确问题的方法,以满足生产要求。  相似文献   

硬致密泥岩钻进的新型复合片钻头的研究与应用          下载免费PDF全文

李雨蔡家品  贾美玲张建元 赵尔信 《探矿工程》2006,33(9):60-61,54

介绍了一种新型齿形的复合片钻头，在硬致密泥岩中钻进，与常规复合片钻头相比，具有很高的钻进效率和高的钻头寿命，解决了泥岩钻进效率低的难题。  相似文献