不同顶管组合方式的管幕冻结温度场模型试验   总被引：1，自引：1，他引：0  

段寅  荣传新  程桦  蔡海兵  解德柱  丁杨龙 《冰川冻土》2020,42(2):479-490

拱北隧道作为港珠澳大桥珠海连接线的关键性工程， 在国内外首次成功运用了管幕冻结技术。以此为背景， 为更加全面地掌握饱和软土地层中管幕冻结温度场的分布特点， 开展了不同顶管组合方式下的管幕冻结温度场模型试验研究。试验结果表明： 各测点温度曲线在积极冻结期前4 h急剧下降， 随后逐渐减缓， 降至砂土冰点后趋于平稳， 三种布管方式均满足冻结设计要求； 冻结管中低温盐水提供的冷量首先传递给顶管管壁， 再以“面”的形式均匀地传递给周围土体； 积极冻结21 h后， 采用四根空顶管组合的C区冻结壁竖向范围最大， 空管管壁正上方冻结壁平均厚度约为105 mm， 在满足管幕刚度设计要求的前提下， 可采此布管方式以达到快速形成冻结帷幕的目的。限位管开启后的4 h内， 实顶管中线垂直距离100 mm范围内测点温度曲线虽有明显回升但仍维持在冻土冰点以下， 超出此范围后温度变化影响逐渐减弱， 且顶管间冻结壁稳定存在， 表明限位管在满足管间有效封水的条件下， 能在一定范围内起到定向限制地层冻胀的作用。优化后的双圆形冻结管在满足冻结设计要求的同时， 更加便于安装且经济环保。  相似文献   

Undrained lower bound solutions for end bearing capacity of shallow circular piles in non-homogeneous and anisotropic clays     

Boonchai Ukritchon  Suraparb Keawsawasvong 《国际地质力学数值与分析法杂志》2020,44(5):596-632

The undrained bearing capacity of shallow circular piles in non-homogeneous and anisotropic clay is investigated by the lower bound (LB) finite element limit analysis (FELA) under two-dimensional (2D) axisymmetric condition using second-order cone programming, and the new solution of the problem is presented. Modified from the isotropic von Mises yield criterion, a cross-anisotropic undrained strength criterion of clays under the axisymmetric state of stress requiring three input shear strengths in triaxial compression, direct simple shear, and triaxial extension is employed in the 2D axisymmetric LB FELA. Parametric studies on the effects of pile embedment ratio, dimensionless strength gradient, anisotropic strength ratio, and pile roughness are investigated extensively, while the predicted failure mechanisms associated with these parameters are discussed and compared. Numerical results of undrained end bearing capacity of shallow circular piles are summarized in the form of design tables that are useful for design practice and represent a new contribution to the field of pile capacity considering the combined effects of undrained strength non-homogeneity and anisotropy.  相似文献   

水平低周往复位移下单桩-土相互作用试验研究     

黄福云  陈汉伦  董锐  单玉麟 《岩土力学》2020,41(5):1625-1634

整体式桥台无伸缩缝桥梁（以下简称整体桥）桩基应设计为柔性桩，以保证较好的抗水平变形能力。但是，我国相关规范中判别柔性桩的算法主要应用于单向水平受荷桩，可否沿用至整体桥桩基还有待验证。为此，根据一种特殊设计的桩身变形测量方法，对3根埋深不同的混凝土模型桩进行了低周水平往复位移下的拟静力试验，研究单桩-土体系的抗震性能和相互作用机制。研究表明，水平往复位移下混凝土桩在埋深为3D～6D（D为桩径）范围内开裂；桩的埋深越大，桩身挠曲程度越大、变形特征点位置也越深、桩-土体系的抗弯刚度也越大、水平极限承载力也越高、抗震性能也越强。研究还表明，桩-土体系进入弹塑性阶段后，柔性桩的水平工作性状将逐渐向刚性桩退化。另外，在判别整体桥桩基的水平工作性状时，我国相关规范中的规定偏不安全。实际工程中，建议以Broms方法进行参考计算。  相似文献   

Soil resistances for laterally loaded rigid piles in multi-layered elastic soil     

Bipin K. Gupta 《Geomechanics and Geoengineering》2020,15(1):10-28

ABSTRACT

Short stubby piles like monopiles and large diameter drilled shafts undergo rigid body translation and rotation when subjected to a lateral force and/or a moment at the head. A method of analysis for these piles embedded in multi-layered elastic soil is developed using the variational principles of mechanics. Using this analysis, the soil resistance against pile movement can be rigorously related to the soil elastic constants, and the pile head displacement and rotation can be quickly calculated. The equilibrium equations for pile and soil displacements are obtained using the principle of virtual work and solved using an iterative algorithm. Pile responses obtained from the analysis match well with those obtained from three-dimensional finite element analyses in which the same inputs of loads, geometry, and material properties are given. Based on the new analysis, fitted equations for soil resistance parameters are developed, which can be used to directly calculate the pile head displacement and rotation without the use of the iterative algorithm. Numerical examples are provided that demonstrate how the method can be used to analyse practical problems.  相似文献   

Development of the cyclic p–y curve for a single pile in sandy soil     

Sung-Ha Baek  Joonyoung Kim  Seung-Hwan Lee 《Marine Georesources & Geotechnology》2018,36(3):351-359

Pile foundations that support transmission towers or offshore structures are dominantly subjected to cyclic lateral load induced by wind and waves. For a successful design, it is crucial to investigate the effect of cyclic lateral loads on the pile behavior that is loaded laterally. Although the p–y curve method is generally utilized to design the cyclic laterally loaded pile foundations, the effect of cyclic lateral loads on the pile has not been properly implemented with the p–y curve. This reflects a lack of consideration of the overall stiffness change in soil–pile interaction. To address this, a series of model pile tests were conducted in this study on a preinstalled aluminum flexible pile under various sandy soil conditions. The test results were used to investigate the effect of cyclic lateral loads on the p–y behavior. The cyclic p–y curve, which properly takes into account this effect, was developed as a hyperbolic function. Pseudo-static analysis was also conducted with the proposed cyclic p–y curve, which showed that it was able to properly simulate cyclic laterally loaded pile behavior in sandy soil.  相似文献   

Permanent earthquake‐induced actions in buried pipelines: Numerical modeling and experimental verification     

《地震工程与结构动力学》2018,47(4):966-987

Buried pipelines are often constructed in seismic and other geohazard areas, where severe ground deformations may induce severe strains in the pipeline. Calculation of those strains is essential for assessing pipeline integrity, and therefore, the development of efficient models accounting for soil‐pipe interaction is required. The present paper is aiming at developing efficient tools for calculating ground‐induced deformation on buried pipelines, often triggered by earthquake action, in the form of fault rupture, liquefaction‐induced lateral spreading, soil subsidence, or landslide. Soil‐pipe interaction is investigated by using advanced numerical tools, which employ solid elements for the soil, shell elements for the pipe, and account for soil‐pipe interaction, supported by large‐scale experiments. Soil‐pipe interaction in axial and transverse directions is evaluated first, using results from special‐purpose experiments and finite element simulations. The comparison between experimental and numerical results offers valuable information on key material parameters, necessary for accurate simulation of soil‐pipe interaction. Furthermore, reference is made to relevant provisions of design recommendations. Using the finite element models, calibrated from these experiments, pipeline performance at seismic‐fault crossings is analyzed, emphasizing on soil‐pipe interaction effects in the axial direction. The second part refers to full‐scale experiments, performed on a unique testing device. These experiments are modeled with the finite element tools to verify their efficiency in simulating soil‐pipe response under landslide or strike‐slip fault movement. The large‐scale experimental results compare very well with the numerical predictions, verifying the capability of the finite element models for accurate prediction of pipeline response under permanent earthquake‐induced ground deformations.  相似文献   

Influence of seismic motions on behavior of piles in liquefied soils          下载免费PDF全文

Kaustav Chatterjee  Deepankar Choudhury 《国际地质力学数值与分析法杂志》2018,42(3):516-541

In the present study an analytical procedure based on finite element technique is proposed to investigate the influence of vertical load on deflection and bending moment of a laterally loaded pile embedded in liquefiable soil, subjected to permanent ground displacement. The degradation of subgrade modulus due to soil liquefaction and effect of nonlinearity are also considered. A free headed vertical concrete elastic nonyielding pile with a floating tip subjected to vertical compressive loading, lateral load, and permanent ground displacement due to earthquake motions, in liquefiable soil underlain by nonliquefiable stratum, is considered. The input seismic motions, having varying range of ground motion parameters, considered here include 1989 Loma Gilroy, 1995 Kobe, 2001 Bhuj, and 2011 Sikkim motions. It is calculated that maximum bending moment occurred at the interface of liquefiable and nonliquefiable soil layers and when thickness of liquefiable soil layer is around 60% of total pile length. Maximum bending moment of 1210 kNm and pile head deflection of 110 cm is observed because of 1995 Kobe motion, while 2001 Bhuj and 2011 Sikkim motions amplify the pile head deflection by 14.2 and 14.4 times and bending moment approximately by 4 times, when compared to nonliquefiable soil. Further, the presence of inertial load at the pile head increases bending moment and deflection by approximately 52% when subjected to 1995 Kobe motion. Thus, it is necessary to have a proper assessment of both kinematic and inertial interactions due to free field seismic motions and vertical loads for evaluating pile response in liquefiable soil.  相似文献   

流塑淤泥地层深基坑钢板桩围堰位移突变原因分析及处理          下载免费PDF全文

杨勇  詹元林 《探矿工程》2020,47(3):69-74

广东省珠海市洪鹤大桥主墩承台位于珠江西江流域的流塑状淤泥地层，采用钢板桩围堰进行基坑支护，基坑开挖过程中，钢板桩围堰发生较大的变形。经详细分析，发现导致事故的主要原因有地下水位持续升高导致土体力学性能显著下降、边跨侧钢板桩长度不足、基坑边缘集中荷载过大、施工控制不严、内支撑体系施工精度不足等。为了确保深基坑支护的安全，在全面分析总结了钢板桩围堰变形原因的基础上，结合实际情况，采取了增设穿透淤泥质土层的钢管桩围堰、加强内支撑体系等加固处理措施，并在实施过程中进行持续监测，最终安全地完成了基坑工程的施工。  相似文献   

轴压作用下双金属复合管组合作用与承载力分析     

朱振兴  杨璐  王法承  方成 《海洋工程》2019,37(4):98-106

为探究轴压作用下双金属复合海底管道的组合作用与承载性能,对双金属复合海底管道进行了试验研究和理论分析。开展了不锈钢衬管材料性能试验,对比了国际主流不锈钢本构关系模型和试验结果。利用ABAQUS建立了精细化的双金属复合管道轴压试验有限元模型,系统研究了关键参数如复合工艺产生的环向复合应力、钢管初始缺陷幅值等对双金属复合管在轴压作用下力学性能的影响规律。通过对比已有轴压双金属复合管道试验结果,验证有限元模型。基于验证的有限元模型,对轴压作用下双金属复合管道的组合作用以及径厚比和材料强度对承载力的影响进行了分析。结果表明双金属复合管道的轴压极限承载力主要取决于基管的截面屈服荷载,并随着管径和材料强度的提高而增大。并依据分析结果对双金属复合海底管道的设计提出建议。  相似文献   

Micromechanical approach to effective viscoelastic properties of micro‐fractured geomaterials          下载免费PDF全文

Cássio B. Aguiar  Samir Maghous 《国际地质力学数值与分析法杂志》2018,42(16):2018-2046

The aim of this paper is to formulate a micromechanics‐based approach to non‐aging viscoelastic behavior of materials with randomly distributed micro‐fractures. Unlike cracks, fractures are discontinuities that are able to transfer stresses and can therefore be regarded from a mechanical viewpoint as interfaces endowed with a specific behavior under normal and shear loading. Making use of the elastic‐viscoelastic correspondence principle together with a Mori‐Tanka homogenization scheme, the effective viscoelastic behavior is assessed from properties of the material constituents and damage parameters related to density and size of fractures. It is notably shown that the homogenized behavior thus formulated can be described in most cases by means of a generalized Maxwell rheological model. For practical implementation in structural analyses, an approximate model for the isotropic homogenized fractured medium is formulated within the class of Burger models. Although the approximation is basically developed for short‐term and long‐term behaviors, numerical applications indicate that the approximate Burger model accurately reproduce the homogenized viscoelastic behavior also in the transient conditions.  相似文献