西南岩溶山区地下水资源承载能力评价——以贵州省七星关区为例     

唐佐其  李瑞敏  谯文浪  殷志强  刘琼  陈武  赵德刚 《地质通报》2020,(1):124-130

以国家扶贫攻坚重点地区——贵州乌蒙山七星关区为例,参考"全国地质资源环境承载能力评价与监测预警"形成的评价理论和方法,结合岩溶石山区地下水资源水文地质条件及开发利用实际,探索构建岩溶石山区县域范围内地下水资源承载能力评价方法。通过系统评价七星关区地下水资源承载能力,认为该区地下水资源承载能力较大,但资源、开采强度、劣质水分布不均,降低了部分区域地下水资源承载能力。评价结果为区域国土空间规划及"三区三线"划定提供了依据。同时,该评价方法亦为岩溶地区地下水资源承载能力评价提供了借鉴。  相似文献   

太行山东麓汤西断裂南段活动特征分析     

戴骜鹏  刘明军  贺为民  孙译 《大地测量与地球动力学》2020,40(6):571-576

采用槽探、年代样品测试、阶地调查和形变测量监测等方法，对太行山东麓汤西断裂南段进行研究，分析其活动特征。结果表明，汤西断裂发育于中更新世，历经多次活动，断裂并未上延到上更新统地层中，其南段的活动强度较高，最新活动年代为中更新世；汤西断裂西代村场地的垂直形变监测（1999~2014年）结果存在异常，综合监测点数据和区域新构造特征分析发现，该异常可能是研究区区域形变场的反映，并非由汤西断裂活动引起。  相似文献   

河北武城凸起地热田地热地质特征     

王迪  汪新伟  毛翔  武明辉  刘慧盈  张瑄  王婷灏 《地学前缘》2020,27(3):269-280

在“雄县模式”和环境压力的双重驱动下,河北地区已形成我国最大的地热供暖城市群。因此,研究武城凸起地热田地热地质特征,对河北省故城县地热开发具有重要的指导意义。本文通过测井、地震和区域地质资料,结合水化学特征、同位素测试结果的分析,系统分析了地热田的不同类型热储展布、储集层物性、地下热水补给来源和循环路径特征,并精细评价了地热资源量。结果表明武城凸起地热田热储类型主要为馆陶组砂岩热储和奥陶系岩溶热储。砂岩热储区域稳定分布,主要产水层为下馆陶组,底板埋深1 200~1 600 m,单井出水量79~123 m³/h, 井口水温52~54 ℃;岩溶热储有利区带主要分布在寒武—三叠系卷入的背斜核部,呈南北向带状展布,主要产水层为上马家沟组、下马家沟组和亮甲山组,顶板埋深2 100~2 900 m,单井出水量75~98 m³/h,井口水温82~85 ℃。地下热水来源为西部太行山脉和北部燕山山脉,热水沿着NE-SW向断裂破碎带和岩溶不整合面向上水平运移进入浅层热储,通过沧县隆起和邢衡隆起在武城凸起汇集,形成中低温地热田。地下热水质类型为Cl-Na型,最大循环深度为2 822.5~3 032.5 m,¹⁴C测年表明砂岩热储和岩溶热储年龄分别为21 ka和32 ka。明化镇组和石炭—二叠系分别为两套热储的直接盖层。武城凸起地热田地热资源量分层精细评价结果表明,热储地热资源量合计4.86×10¹⁰ GJ,折合标煤16.6×10⁸ t。年可开采地热资源量可满足供暖面积1.1×10⁸ m²,市场开发潜力巨大。  相似文献   

祁连山北部基岩河道宽度对构造和岩性的响应     

李琼  秦冰雪  潘保田 《第四纪研究》2020,(1):132-147

活动造山带基岩河流地貌研究,目前已成为构造地貌学研究的前沿和热点。河道宽度形态的调整变化是基岩河流响应构造、岩性和气候等扰动的重要方式之一。通过研究祁连山北部地区6个重点流域基岩河道的宽度形态发现:河道宽度总体上呈现出东西向和南北向的变化特征,河道向下游增宽的速率,东段地区显著高于中段地区,低山带显著高于高山带;对比河道宽度的变化特征与构造抬升速率及岩性抗蚀性的变化,可以推断:在祁连山北部地区,基岩河道宽度响应构造抬升和岩性抗蚀性的变化进行了系统地调整,构造抬升控制了流域河道宽度变化的总体趋势,而岩性抗蚀性变化则导致了流域内部局部河段河道宽度的大幅波动。在祁连山北部地区开展的基岩河道宽度形态研究,为利用基岩河道形态研究造山带的构造变形奠定了基础,对于探索构造抬升背景下地貌的发育过程具有十分重要的意义。  相似文献   

不同空间尺度的山洪灾害风险评价模型对比研究          下载免费PDF全文

田丰  张军  冉有华  刘金鹏  周翼 《干旱区地理》2019,42(3):559-569

以山洪灾害风险评价的多准则决策模型、最大熵模型、信息量模型三种常见模型为研究对象，选取河西走廊和张掖市为地理区划（大中）、市域（小）空间尺度研究区，构建山洪灾害风险评价指标体系，分别完成基于三种模型的两种空间尺度的山洪灾害风险评价制图，基于甘肃省地质灾害调查与区划报告数据从模型验证、空间自相关、精度对比和尺度效应等角度对比分析三个模型应用于不同空间尺度的适应性，并给出优选模型。结果表明：最大熵模型是河西走廊（地理区划）空间尺度上山洪灾害风险评价的优选模型；多准则决策模型不适用于张掖市（市域）空间尺度评价，且三个模型运行结果均没有河西走廊（地理区划）空间尺度上表现良好；三个模型的尺度效应明显，在地理区划空间尺度上应用较良好，缩小至市域空间尺度上模拟结果误差增大；不同空间尺度上，最大熵模型均优于多准则决策模型和信息量模型，适用于地理区划（大中）、市域（小）空间尺度的山洪灾害风险评价。  相似文献   

山东蒙山与四川海螺沟冰川擦痕特征对比及成因分析   总被引：1，自引：0，他引：1       下载免费PDF全文

王照波  王江月 《山东国土资源》2019,35(6)

冰川擦痕在冰川遗迹的判断中具有极为重要的意义,其中以槽谷岩壁擦痕与冰碛砾石擦痕最为明显。槽谷岩壁擦痕具有细长密集、近似平行的特征;冰碛砾石擦痕具有短粗稀疏、方向杂乱的特征。除此之外,还有弧形擦痕、逆冲擦痕、新月形凿口、新月形裂纹、新月形裂口、颤痕等刻蚀遗迹的配套产出。经对比分析,蒙山发育的擦痕与四川海螺沟现代冰川谷内的擦痕具有完全的一致性,因此进一步确定了蒙山擦痕的冰川成因。  相似文献   

大别山及其周边现今垂直形变研究     

宋尚武  王庆良  郝明  周琳  刘立炜  胡亚轩 《大地测量与地球动力学》2018,38(1):32-35

基于1980年、2005年和2015年3期区域精密水准网观测资料，利用线性动态平差模型计算获取大别山地区水准网长期垂直运动速度场图像。研究发现，淮河平原地表下沉较为严重，大别山呈现弱隆升趋势运动，长江谷地边缘地区较大别山区呈现明显的隆升运动。跨郯庐断裂带水准剖面结果显示，垂直运动与地形呈负相关和弱相关。  相似文献   

GEOCHEMISTRY     

《Abstract of Chinese Geological Literature》2014,(3)

正20141357 Guo Tao(School of Mathematics and Science,Shijiazhuang University of Economics,Shijiazhuang 050031,China);Hu Jiawen Assessment on the New Pressure-Volume-Temperature(PVT) Data of Supercritical Water(Geological Journal of China Universities,ISSN1006-7493,CN32-1440/P,19(3),2013,p.447-455,9 illus.,3 tables,32 refs.)Key words:supercritical fluids  相似文献   

Access routes to high mountain huts facing climate-induced environmental changes and adaptive strategies in the Western Alps since the 1990s     

Jacques Mourey  Ludovic Ravanel  Christophe Lambiel  Joël Strecker  Mattia Piccardi 《Norsk geografisk tidsskrift. Norwegian journal of geography》2019,73(4):215-228

ABSTRACT

In the European Alps, high mountain environments are subject to major impacts resulting from climate change, which strongly affect human activities such as mountaineering. The purpose of the study was to examine changes in access routes to 30 high mountain huts in the Western Alps since the 1990s. Data were derived from the use of two different methods, geo-historical studies and a questionnaire, and were used to identify both the climate-related processes affecting the climbing routes and the strategies implemented by public entities, Alpine clubs, guide companies, and hut keepers to maintain acceptable safety and technical conditions. The case studies revealed issues affecting three access routes and the results from the questionnaire showed that the main processes affecting access routes were loss of ice thickness and retreat from the front of the glaciated areas. Commonly, in situ equipment was installed to facilitate access for mountaineers and/or a part of a route was relocated to a safer area. The authors conclude that in most cases, the measures were effective but they were limited by financial, ethical and legal issues, especially in protected or classified areas that could jeopardise their durability and effectiveness.  相似文献   

Quantifying flow resistance in mountain streams using computational fluid dynamics modeling over structure-from-motion photogrammetry-derived microtopography     

Yunxiang Chen  Roman A. DiBiase  Nicholas McCarroll  Xiaofeng Liu 《地球表面变化过程与地形》2019,44(10):1973-1987

Flow resistance in mountain streams is important for assessing flooding hazard and quantifying sediment transport and bedrock incision in upland landscapes. In such settings, flow resistance is sensitive to grain-scale roughness, which has traditionally been characterized by particle size distributions derived from laborious point counts of streambed sediment. Developing a general framework for rapid quantification of resistance in mountain streams is still a challenge. Here we present a semi-automated workflow that combines millimeter- to centimeter-scale structure-from-motion (SfM) photogrammetry surveys of bed topography and computational fluid dynamics (CFD) simulations to better evaluate surface roughness and rapidly quantify flow resistance in mountain streams. The workflow was applied to three field sites of gravel, cobble, and boulder-bedded channels with a wide range of grain size, sorting, and shape. Large-eddy simulations with body-fitted meshes generated from SfM photogrammetry-derived surfaces were performed to quantify flow resistance. The analysis of bed microtopography using a second-order structure function identified three scaling regimes that corresponded to important roughness length scales and surface complexity contributing to flow resistance. The standard deviation σ_z of detrended streambed elevation normalized by water depth, as a proxy for the vertical roughness length scale, emerges as the primary control on flow resistance and is furthermore tied to the characteristic length scale of rough surface-generated vortices. Horizontal length scales and surface complexity are secondary controls on flow resistance. A new resistance predictor linking water depth and vertical roughness scale, i.e.  H/σ_z, is proposed based on the comparison between σ_z and the characteristic length scale of vortex shedding. In addition, representing streambeds using digital elevation models (DEM) is appropriate for well-sorted streambeds, but not for poorly sorted ones under shallow and medium flow depth conditions due to the missing local overhanging features captured by fully 3D meshes which modulate local pressure gradient and thus bulk flow separation and pressure distribution. An appraisal of the mesh resolution effect on flow resistance shows that the SfM photogrammetry data resolution and the optimal CFD mesh size should be about 1/7 to 1/14 of the standard deviation of bed elevation. © 2019 John Wiley & Sons, Ltd.  相似文献