How soil texture,channel shape and cross-sectional area affect moisture dynamics and water loss in irrigation channels     

Zhifan Mu  Tianxiao Li  Dong Liu  Qiang Fu  Renjie Hou  Qinglin Li  Yi Ji  Song Cui  Mo Li 《水文研究》2021,35(4):e14155

To enhance the utilization efficiency of farmland irrigation water and reduce the leakage of water conveyance channels, the leakage process of channels was simulated dynamically. The simulated results were compared with data measured in laboratory experiments, and the performance of the model was evaluated. The results indicated that the simulated values of the model were consistent with the observation values, and the R² values varied between 0.91 and 0.99. In addition, based on the laboratory experiments, a water supply system (Mariotte bottles) and soil box were built using plexiglass. Three influencing factors, namely, the channel form, soil texture and channel cross-sectional area, were varied to observe and calculate the resulting cumulative infiltration amount, infiltration rate and wetting front migration distance. HYDRUS-3D software was used to solve the three-dimensional soil water movement equation under different initial conditions. The results demonstrated that the U-shaped channel was more effective than the trapezoidal channel in increasing the utilization efficiency of the water resources. A U-shaped channel with a small channel cross-sectional area should be adopted and the soil particle size should be prioritized in the construction of water conveyance channels for farmlands. The simulation results were in agreement with the observed results, which indicates that HYDRUS-3D is a reliable tool that can accurately simulate the soil moisture movement in water conveyance channels. The research results can provide a reference for the design and operation of farmland irrigation systems.  相似文献   

Topographical controls on small‐volume pyroclastic flows     

Joan Martí  Domenico M. Doronzo  Dario Pedrazzi  Ferran Colombo 《Sedimentology》2019,66(6):2297-2317

Emplacement of small‐volume (<0·1 km³) pyroclastic flows is significantly influenced by topography. The Arico ignimbrite on Tenerife (Canary Islands) is a characteristic small‐volume pyroclastic flow deposit emplaced on high relief topography. The pyroclastic flow flowed down pre‐existing valleys on the southern slopes of the island. In proximal areas deep (up to 100 m) valleys acted as efficient conduits for the pyroclastic flow, which was mostly channelled; in this particular area the ignimbrite corresponds to a homogeneous, moderately welded deposit, consisting of flattened pumices in an abundant ashy matrix with a relatively low lithic fragment content. In intermediate zones significant changes occur in the steepness of the slope and, although still channelled, here the pyroclastic flow was influenced by hydraulic jumps. In this area, two different units can be clearly distinguished in the ignimbrite: the lower unit is composed of a lithic‐rich ground‐layer deposit that formed at the turbulent, highly concentrated head of the flow; the upper unit consists of a well welded pumice‐rich deposit that occasionally reveals a basal layer formed by shearing with the lower part. This division into two units is maintained as far as distal areas near the present‐day coastline, where the slope is very gentle or null and the ignimbrite is not channelled. The ground layer is not found in distal areas. The ignimbrite here only consists of the upper unit, which is occasionally repeated due to a surging process provoked by the lower flow speed, as the pyroclastic flow spread out of the channelled zone. A theoretical model on how topography controlled the deposition of the Arico ignimbrite is derived by interpreting the observed lithological and sedimentological variations in terms of changes in topography and bedrock morphology. This new model is of general applicability and will help to explain other deposits of similar characteristics.  相似文献   

Morphodynamic assessment of side channel systems using a simple one‐dimensional bifurcation model and a comparison with aerial images          下载免费PDF全文

R. Pepijn van Denderen  Ralph M. J. Schielen  Astrid Blom  Suzanne J. M. H. Hulscher  Maarten G. Kleinhans 《地球表面变化过程与地形》2018,43(6):1169-1182

Side channel construction is a common intervention applied to increase a river's conveyance capacity and to increase its ecological value. Past modelling efforts suggest two mechanisms affecting the morphodynamic change of a side channel: (1) a difference in channel slope between the side channel and the main channel and (2) bend flow just upstream of the bifurcation. The objective of this paper was to assess the conditions under which side channels generally aggrade or degrade and to assess the characteristic timescales of the associated morphological change. We use a one‐dimensional bifurcation model to predict the development of side channel systems and the characteristic timescale for a wide range of conditions. We then compare these results to multitemporal aerial images of four side channel systems. We consider the following mechanisms at the bifurcation to be important for side channel development: sediment diversion due to the bifurcation angle, sediment diversion due to the transverse bed slope, partitioning of suspended load, mixed sediment processes such as sorting at the bifurcation, bank erosion, deposition due to vegetation, and floodplain sedimentation. There are limitations to using a one‐dimensional numerical model as it can only account for these mechanisms in a parametrized manner, but the model reproduces general behaviour of the natural side channels until floodplain‐forming processes become important. The main result is a set of stability diagrams with key model parameters that can be used to assess the development of a side channel system and the associated timescale, which will aid in the future design and maintenance of side channel systems. © 2017 The Authors. Earth Surface Processes and Landforms published by John Wiley & Sons Ltd.  相似文献   

南沙海域海底浅层第四系地震地层结构与地质意义          下载免费PDF全文

陈洁  万荣胜  张金鹏  韩冰  苏世龙 《地球物理学报》2018,61(1):242-249

科技进步使得地震采集数据量及其精度实现质的飞跃，南沙海域的地震调查，采用国际先进水平的等离子震源，获得地震剖面精度优于3 m局部甚至可在1 m之内，为科学研究、工程、浅层资源、地质灾害预警等研究奠定基础.在南沙第四系识别出了七个地震反射界面，确定500 ms至海底沉积区间内地震层序与三期海平面升降并与冰期、间冰期对应，典型地震剖面展示第四纪至少有三套完整的具有三角洲顶积层、前积层、底积层的地震相证据，与全球的第四纪海平面的变化一致.精细的浅层地震结构表明：南沙的地质现象丰富，浅层断层非常发育，下切河谷、泥石流、滑坡等地质遗迹的形成的地震相清晰，是地质活动频繁的地区.  相似文献   

基于地学信息图谱的河道、海岸线演变对黄河三角洲景观格局影响研究   总被引：1，自引：0，他引：1  

李丹  王庆  徐洋  战超  刘现彬  王龙升  崔步礼  于祥  孙晓  王秋贤 《海洋与湖沼》2018,49(6):1220-1229

本文利用1988、1998、2009和2016年四期遥感影像,运用GIS技术,将地学信息图谱的图形思维与景观生态学的定量思维相结合,以距今不同时期的亚三角洲和滨海湿地为研究区,从景观结构和景观演替两个方面探究黄河三角洲河道、海岸线演变对景观格局的影响。结果表明:(1)距今不同时间的河道对黄河三角洲景观结构的影响程度不同,距今时间越长的亚三角洲研究区内耕地占总面积的比例越大且耕地是亚三角洲研究区中的第一优势景观类型。在1855—1889亚三角洲研究区内,除耕地和建筑用地外,其他各类景观占总面积的比例都较小且随时间变化不明显;在1929—1934亚三角洲研究区内,盐田、养殖池占总面积的比例从2009年到2016年增加了近40%,涨幅明显;在1964—1976亚三角洲研究区内,各类景观占总面积的比例趋于平均;在2017至今的亚三角洲研究区内,耕地和光滩占总面积的比例较高,达到24%左右。(2)距今不同时间的海岸线对黄河三角洲景观结构的影响程度也不同,在1855滨海湿地研究区内,耕地占总面积比例为60%左右,而海域占总面积比例接近于0,极差较大;在1934和1974滨海湿地研究区内,光滩、柽柳、碱蓬群落、芦苇、白茅群落占总面积比例随时间变化几乎呈逐渐下降趋势,而建筑用地和盐田、养殖池则呈逐渐上升趋势;2009滨海湿地研究区,河流、人工水域占总面积比例在2009年和2016年均达到32%以上。(3)根据景观类型重心变化特征,分析河道、海岸线演变对景观演替的影响程度,将不同时期亚三角洲和滨海湿地研究区景观演替分为如下几类:亚三角洲人类活动主导型、废弃河道主导型、行水河道主导型、滨海湿地人类活动主导型、废弃海岸主导型、新海岸主导型。  相似文献   

Effects of the geometry of two‐dimensional fractures on their hydraulic aperture and on the validity of the local cubic law          下载免费PDF全文

Ahmad Hajjar  Luc Scholtès  Constantin Oltéan  Michel Antoine Buès 《水文研究》2018,32(16):2510-2525

Flow through rough fractures is investigated numerically in order to assess the validity of the local cubic law for different fracture geometries. Two‐dimensional channels with sinusoidal walls having different geometrical properties defined by the aperture, the amplitude, and the wavelength of the walls' corrugations, the corrugations asymmetry, and the phase shift between the two walls are considered to represent different fracture geometries. First, it is analytically shown that the hydraulic aperture clearly deviates from the mean aperture when the walls' roughness, the phase shift, and/or the asymmetry between the fracture walls are relatively high. The continuity and the Navier–Stokes equations are then solved by means of the finite element method and the numerical solutions compared to the theoretical predictions of the local cubic law. Reynolds numbers ranging from 0.066 to 66.66 are investigated so as to focus more particularly on the effect of flow inertial effects on the validity of the local cubic law. For low Reynolds number, typically less than 15, the local cubic law properly describes the fracture flow, especially when the fracture walls have small corrugation amplitudes. For Reynolds numbers higher than 15, the local cubic law is valid under the conditions that the fracture presents a low aspect ratio, small corrugation amplitudes, and a moderate phase lag between its walls.  相似文献   

Stream channel erosion in a rapidly urbanizing region of the US–Mexico border: documenting the importance of channel hardpoints with Structure‐from‐Motion photogrammetry          下载免费PDF全文

Kristine T. Taniguchi  Trent W. Biggs  Eddy J. Langendoen  Carlos Castillo  Napoleon Gudino‐Elizondo  Yongping Yuan  Douglas Liden 《地球表面变化过程与地形》2018,43(7):1465-1477

Urbanization can lead to accelerated stream channel erosion, especially in areas experiencing rapid population growth, unregulated urban development on erodible soils, and variable enforcement of environmental regulations. A combination of field surveys and Structure‐from‐Motion (SfM) photogrammetry techniques was used to document spatial patterns in stream channel geometry in a rapidly urbanizing watershed, Los Laureles Canyon (LLCW), in Tijuana, Mexico. Ground‐based SfM photogrammetry was used to map channel dimensions with 1 to 2 cm vertical mean error for four stream reaches (100–300 m long) that were highly variable and difficult to survey with a differential GPS. Regional channel geometry curves for LLCW had statistically larger slopes and intercepts compared with regional curves developed for comparable, undisturbed reference channels. Cross‐sectional areas of channels downstream of hardpoints, such as concrete reaches or culverts, were up to 64 times greater than reference channels, with enlargement persisting, in some cases, up to 230 m downstream. Percentage impervious cover was not a good predictor of channel enlargement. Proximity to upstream hardpoint, and lack of riparian and bank vegetation paired with highly erodible bed and bank materials may account for the instability of the highly enlarged and unstable cross‐sections. Channel erosion due to urbanization accounts for approximately 25–40% of the total sediment budget for the watershed, and channel erosion downstream of hardpoints accounts for one‐third of all channel erosion. Channels downstream of hardpoints should be stabilized to prevent increased inputs of sediment to the Tijuana Estuary and local hazards near the structures, especially in areas with urban settlements near the stream channel. Copyright © 2017 John Wiley & Sons, Ltd.  相似文献   

Simulating cross-sectional geometry of the main channel in response to changes in water and sediment in Lower Yellow River     

Wang  Yanjun  Wu  Baosheng  Zhong  Deyu 《地理学报(英文版)》2020,30(12):2033-2052

Journal of Geographical Sciences - To understand the non-equilibrium morphological adjustment of a river in response to environmental changes, it is essential to (i) accurately identify how past...  相似文献   

Sediment flux-driven channel geometry adjustment of bedrock and mixed gravel–bedrock rivers     

Edwin R.C. Baynes  Dimitri Lague  Philippe Steer  Stéphane Bonnet  Luc Illien 《地球表面变化过程与地形》2020,45(14):3714-3731

Sediment supply (Q_s) is often overlooked in modelling studies of landscape evolution, despite sediment playing a key role in the physical processes that drive erosion and sedimentation in river channels. Here, we show the direct impact of the supply of coarse-grained, hard sediment on the geometry of bedrock channels from the Rangitikei River, New Zealand. Channels receiving a coarse bedload sediment supply are systematically (up to an order of magnitude) wider than channels with no bedload sediment input for a given discharge. We also present physical model experiments of a bedrock river channel with a fixed water discharge (1.5 l min⁻¹) under different Q_s (between 0 and 20 g l⁻¹) that allow the quantification of the role of sediment in setting the width and slope of channels and the distribution of shear stress within channels. The addition of bedload sediment increases the width, slope and width-to-depth ratio of the channels, and increasing sediment loads promote emerging complexity in channel morphology and shear stress distributions. Channels with low Q_s are characterized by simple in-channel morphologies with a uniform distribution of shear stress within the channel while channels with high Q_s are characterized by dynamic channels with multiple active threads and a non-uniform distribution of shear stress. We compare bedrock channel geometries from the Rangitikei and the experiments to alluvial channels and demonstrate that the behaviour is similar, with a transition from single-thread and uniform channels to multiple threads occurring when bedload sediment is present. In the experimental bedrock channels, this threshold Q_s is when the input sediment supply exceeds the transport capacity of the channel. Caution is required when using the channel geometry to reconstruct past environmental conditions or to invert for tectonic uplift rates, because multiple configurations of channel geometry can exist for a given discharge, solely due to input Q_s. © 2020 The Authors. Earth Surface Processes and Landforms published by John Wiley & Sons Ltd  相似文献   

Channel stability in steep gravel–cobble streams is controlled by the coarse tail of the bed material distribution     

Brett C. Eaton  Lucy G. MacKenzie  William H. Booker 《地球表面变化过程与地形》2020,45(14):3639-3652

Researchers have associated channel-forming flows with reach-average shear stresses close to the entrainment threshold for the surface D₅₀ . We conducted experiments using a model of a generic steep, gravel–cobble stream to test this association. Our results suggest that channel-forming flows fully mobilize the D₅₀ , and produce shear stresses close to the entrainment threshold for the largest grains in the bed. The channel dimensions were set by flows capable of mobilizing between 85% and 90% of the bed surface, which produced a brief period of lateral instability lasting about 1 h, followed by a prolonged period of relative stability during which modest adjustments occurred, but during which the reach-average hydraulics remained about the same. The adjustments during the unstable phase of the experiments are characterized by rapid bank erosion, extensive deposits on the channel bed and a restructuring of the major morphologic elements of the stream. The adjustments during the stable phase of the experiments involved barform migration and bed surface coarsening but did not appreciably modify the physical template established by the end of the unstable phase. The behaviour we observed is not consistent with the concept of a dynamic equilibrium associated with a formative flow that is just capable of entraining the bed surface D₅₀ . Instead, it suggests that rapid adjustments occur once a stability threshold is exceeded, which creates a template that constrains channel activity until another event drives the system across the stability threshold, and re-sets the template. While we believe that it is probably too simplistic to associate a channel-forming discharge with the entrainment threshold for a single grain size, our results suggest that the D₉₅ is a more logical choice than the D₅₀ © 2020 John Wiley & Sons, Ltd.  相似文献