First Multi‐Isotopic (Pb‐Nd‐Sr‐Zn‐Cu‐Fe) Characterisation of Dust Reference Materials (ATD and BCR‐723): A Multi‐Column Chromatographic Method Optimised to Trace Mineral and Anthropogenic Dust Sources     

Aubry Vanderstraeten  Steeve Bonneville  Stefania Gili  Jeroen de Jong  Wendy Debouge  Philippe Claeys  Nadine Mattielli 《Geostandards and Geoanalytical Research》2020,44(2):307-329

Atmospheric dust is an integral component of the Earth system with major implications for the climate, biosphere and public health. In this context, identifying and quantifying the provenance and the processes generating the various types of dust found in the atmosphere is paramount. Isotopic signatures of Pb, Nd, Sr, Zn, Cu and Fe are commonly used as sensitive geochemical tracers. However, their combined use is limited by the lack of (a) a dedicated chromatographic protocol to separate the six elements of interest for low‐mass samples and (b) specific reference materials for dust. Indeed, our work shows that USGS rock reference materials BHVO‐2, AGV‐2 and G‐2 are not applicable as substitute reference materials for dust. We characterised the isotopic signatures of these six elements in dust reference materials ATD and BCR‐723, representatives of natural and urban environments, respectively. To achieve this, we developed a specific procedure for dust, applicable in the 4–25 mg mass range, to separate the six elements using a multi‐column ion‐exchange chromatographic method and MC‐ICP‐MS measurements.  相似文献   

内蒙古碾子沟钼矿床成矿流体来源、演化及成矿机理     

孙丰月  王睿  王一存  李顺达  王可勇  石开拓  孙清飞  王文元 《吉林大学学报(地球科学版)》2020,50(3):768-780

内蒙古自治区碾子沟钼矿床地处华北地台北缘西拉木伦钼成矿带西段，为一典型的中型石英脉型钼矿床。该钼矿床矿脉（体）主要产于燕山早期二长花岗岩-钾长花岗岩内NNW、NW向断裂构造体系之中，成矿作用过程经历了黄铁矿±辉钼矿＋石英（Ⅰ）、辉钼矿＋黄铁矿±黄铜矿＋石英（Ⅱ）、黄铜矿＋黄铁矿±闪锌矿＋石英（Ⅲ）及石英±方解石（Ⅳ）4个阶段。系统的流体包裹体岩相学、包裹体组分析、包裹体显微测温研究表明，矿床初始成矿流体为高温、中低盐度（490~550℃，盐度（w（NaC1））2%~10%，50~62 MPa）均匀的NaCl-H₂O体系热液，δ¹⁸O_H2O-SMOW（2.21‰）及δD_H2O-SMOW（-68.9‰）表明其主要来源于岩浆热液；成矿流体上升并不断汇聚于容矿断裂空间，伴随温度、压力降低（380~460℃，26~40 MPa→360~420℃，25~30 MPa）而进入两相不混溶区，流体开始发生沸腾→强烈沸腾作用，导致成矿元素Mo大量沉淀富集成矿，成矿晚期残余流体与大气降水混合（δ¹⁸O_H2O-SMOW为-2.41‰~2.51‰，δD_H2O-SMOW为-110.1‰~-105.5‰），矿床属燕山早期中高温岩浆热液型钼矿床。  相似文献   

2007-2017年中国沙尘气溶胶的三维分布特征及输送过程     

贾瑞  刘玉芝  吴楚樵  祝清哲  汪兵 《中国沙漠》2019,39(6):108-117

利用最新发布的CALIPSO产品，构建了2007-2017年中国沙尘气溶胶的三维分布，并结合HYSPLIT-4模式和再分析数据，探讨了沙尘的三维输送过程。结果表明：中国的沙尘排放源区主要是塔克拉玛干沙漠和巴丹吉林沙漠，沙尘气溶胶出现频率分别为60%和35%。塔克拉玛干沙漠排放的沙尘主要（50%~70%）停留在源地0~6 000 m高度，少部分向东输送至甘肃和内蒙古；巴丹吉林沙漠排放的沙尘则主要向东输送。中国沙尘排放量在春季最大，向东输送最强；夏季，东亚夏季风限制了沙尘向东输送；秋季，沙尘排放减弱，输送强度和夏季相当；沙尘排放量在冬季最小，输送最弱。夏季，沙尘在输送过程中可被抬升至高度5 000 m以上，春季次之，秋、冬季的沙尘主要在低层大气输送。沙尘在向东输送的过程中被抬升并和当地人为污染物混合变为污染性沙尘，华北地区污染性沙尘出现频率高达30%；输送到海洋的沙尘也会与洋面上（0~3 000 m高度）的海盐气溶胶混合，出现频率约为10%。  相似文献   

晋北煅烧高岭土用煤矸石的应用矿物学特征   总被引：1，自引：0，他引：1  

侯龙超  王哲皓  汪灵  周东晓 《矿物学报》2020,(2):149-154

为了给晋北煅烧高岭土用煤矸石的评价和开发利用提供科学依据,采用XRD、XRF、SEM和白度计等现代分析测试技术,研究了晋北煅烧高岭土用煤矸石的应用矿物学特征。结果表明:1)根据造纸和涂料用煅烧高岭土的国家标准,晋北煤矸石主要可分为3种类型:合格原料、基本合格原料和不合格原料。2)与合格和基本合格原料相比,不合格原料煅烧产物的化学成分中SiO2、Al2O3、Fe2O3含量以及碱金属与碱土金属总含量都与前者有较大差异。3)合格和基本合格原料主要由高岭石(85%~94%)组成,不合格煤矸石矿物组合为高岭石(30%~60%)+石英(23%~38%)+伊利石(14%~26%),并含少量黄铁矿和白云石等杂质矿物,石英等杂质矿物和含铁矿物是分别导致煅烧产物化学成分和白度不合格的主要原因。4)合格原料中高岭石结晶度较好,主要为不规则片状、书册状和弯曲片状,片表面光滑,片径大小范围较大,为0.05~51.22μm,平均2.80μm,径厚比41.24。  相似文献   

Spatial and Temporal Distribution of Dust‐Bound Trace Metal Elements around Kuhdasht Watershed Area in Iran     

Hamid Alipour  Ahmad Jalalian  Naser Honarjoo  Norair Tommanian  Fereidoon Sarmadian 《洁净——土壤、空气、水》2019,47(10)

Dust, as a source of trace metal elements, affects the health of society. The spatial and temporal concentrations of dust‐bound trace metals (Cd, Pb, Ni, Zn, Cu, and Mn) in Kuhdasht watershed (456 km²), Lorestan Province, Iran, is investigated. Dust is collected using glass traps placed in ten research stations in the region. The spatial and temporal distribution of dust trace metals are plotted using ARC‐GIS. The highest and the lowest concentrations of Zn (9751150 mg kg^?1), Pb (46.352.9 mg kg^?1), and Cd (2.443.30 mg kg^?1) are obtained in winter, of Ni (98110 mg kg^?1) and Cu in autumn (16.053.5 mg kg^?1), and of Mn in summer (385505 mg kg^?1). The spatial concentrations of dust‐bound trace metals indicate all, except Cu, show a decreasing trend from the mountains toward the plains, similar to that of soil and of dust, except for Zn, which shows higher concentrations in dust than in soil. The potential sources of dust‐bound trace metals and their rate of contamination are also investigated using the enrichment and contamination factors. The major sources of Cd and Zn in the dust of watershed are due to anthropogenic activities or from activities outside the borders.  相似文献   

An Amended Chemical Mass Balance Model for Source Apportionment of PM2.5 in Typical Chinese Eastern Coastal Cities     

Qiaoli Wang  Nana Cheng  Sujing Li  Minli Dong  Xiangqian Wang  Linlin Ge  Tianjiao Guo  Wei Li  Xiang Gao 《洁净——土壤、空气、水》2019,47(2)

  相似文献   

车辆碾压作用下戈壁地表起尘浓度   总被引：1，自引：1，他引：0  

孟小楠  严平  王振亭  董苗  王勇 《中国沙漠》2019,39(1):80-87

通过野外观测车辆碾压作用下戈壁地表PM₁₀释放浓度，探讨其主要影响因素。针对戈壁区砾石、砂砾、砂质和砂土4种路面类型，应用TSI粉尘仪多次重复观测车辆碾压产生的PM₁₀浓度，进而阐明碾压次数、车速和地表水分等因素对起尘浓度的影响。结果表明：4种路面的平均起尘浓度依次为5.339、9.089、16.944、50.251 mg·m^-3，是自然状态下的5~50倍；起尘浓度随碾压次数增多而增大，其中砂土路情况下的增长最显著；随土层厚度的增大呈现出幂函数的增长趋势；降雨后路面起尘浓度显著减小，且降雨量会影响降雨后起尘浓度的变化趋势。最后提出了针对性的建议和措施以减弱车辆碾压导致的戈壁地表起尘。  相似文献   

江西东坪石英脉型黑钨矿矿床地质特征、控矿因素及找矿标志     

杨细浩  胡文洁  钟起泓  朱昌杰  万欢  胡正华 《吉林大学学报(地球科学版)》2019,49(5):1301-1316

东坪钨矿床是近年在赣北地区新发现的首个超大型石英脉型黑钨矿矿床，位于长江中下游成矿带幕阜山地区东坪-香炉山钨矿找矿远景区东部。矿床赋矿层位为新元古代双桥山群安乐林组浅变质岩系，北东向断裂及其两侧的次级裂隙为区内主要控矿构造、容矿构造，隐伏的燕山晚期黑云母二长花岗岩为成矿岩体，与区内钨多金属成矿关系密切的为石英脉状硅化；两个矿带的钨矿体均产于成矿岩体外接触带，呈现了石英脉型黑钨矿矿床典型的"五层楼"分带特征，矿石工业类型主要为黑钨矿矿石；明确了构造和岩浆岩等主要控矿因素；总结出地表微细裂隙云英岩化-黄铁矿化蚀变带、含硫化物石英细脉带、石英脉、重砂及地球化学异常为区内主要找矿标志。  相似文献   

Relationship Between Electrical Properties and Sedimentary Environment of the Longmaxi Formation Shale, Southern Sichuan     

YANG Kai  ZHANG Bing  WANG Xuben  HE Lanfang  YANG Hongyu  WANG Pengwan  TANG Jialin  DENG Jixin  ZHANG Cong 《《地质学报》英文版》2020,94(5):1531-1546

The Lower Silurian Longmaxi Formation in the south of Sichuan is a key player in the exploration and development of shale gas in China. Due to a highly complex topographic area, electromagnetic methods (EM) become important exploration means in this area. Many studies have been conducted on the shale mineral composition and electrical properties of shale, however, the correlation between sedimentary environments and the electrical properties of shale remain poorly understood. The electrical properties and sedimentary environment of the organic-rich shale of the Longmaxi Formation have been studied by means of X-ray diffraction, organic geochemistry, scanning electron microscopy and complex resistivity measurements. The discovered high quartz content of the Longmaxi Formation shale results in low resistivity. Deep-water shelf biogenic quartz contributes lower resistivity more than that of shallow-water terrigenous quartz. The deep-water anoxic and organic sedimentary environment led to major enrichment of pyrite, leading to a high polarization effect in shale. We present the correlation between the lithofacies types and electrical properties of Longmaxi Formation. The mixed siliceous shale lithofacies is the most favorable among the three lithofacies, which is characterized by high total organic carbon (TOC) content, high brittleness mineral content, high polarization and low resistivity (“three high and one low”). This feature is an effective identification of shale gas reservoirs by electromagnetic prospecting. Our study can provide constraints on electrical parameters of rocks for electromagnetic “sweet spot” exploration of shale gas, and so this has important geological significance to shale gas exploration and development.  相似文献   

Ore Genesis and Tectonic Significance of the Xiaojiashan Tungsten Deposit,Eastern Tianshan,Xinjiang, China: Evidence from Geology,Fluid Inclusions,and Stable Isotope Geochemistry     

Yunfei Zhou  Jiuhua Xu  Lihua Shan  Xihui Cheng  Yueping Deng  Wenhuan Feng  Lingxiao Qiao 《Resource Geology》2019,69(1):43-64

The Xiaojiashan tungsten deposit is located about 200 km northwest of Hami City, the Eastern Tianshan orogenic belt, Xinjiang, northwestern China, and is a quartz vein‐type tungsten deposit. Combined fluid inclusion microthermometry, host rock geochemistry, and H–O isotopic compositions are used to constrain the ore genesis and tectonic setting of the Xiaojiashan tungsten deposit. The orebodies occur in granite intrusions adjacent to the metamorphic crystal tuff, which consists of the second lithological section of the first Sub‐Formation of the Dananhu Formation (D₂d ₁²). Biotite granite is the most widely distributed intrusive bodies in the Xiaojiashan tungsten deposit. Altered diorite and metamorphic crystal tuff are the main surrounding rocks. The granite belongs to peraluminous A‐type granite with high potassic calc‐alkaline series, and all rocks show light Rare Earth Element (REE)‐enriched patterns. The trace element characters suggest that crystallization differentiation might even occur in the diagenetic process. The granite belongs to postcollisional extension granite, and the rocks formed in an extensional tectonic environment, which might result from magma activity in such an extensional tectonic environment. Tungsten‐bearing quartz veins are divided into gray quartz vein and white quartz veins. Based on petrography observation, fluid inclusions in both kinds of vein quartz are mainly aqueous inclusions. Microthermometry shows that gray quartz veins have 143–354°C of T_h, and white quartz veins have 154–312°C of T_h. The laser‐Raman test shows that CO₂ is found in fluid inclusions of the tungsten‐bearing quartz veins. Quadrupole mass spectrometry reveals that fluid inclusions contain major vapor‐phase contents of CO₂, H₂O. Meanwhile, fluid inclusions contain major liquid‐phase contents of Cl^?, Na⁺. It can be speculated that the ore‐forming fluid of the Xiaojiashan tungsten deposit is characterized by an H₂O–CO₂, low salinity, and H₂O–CO₂–NaCl system. The range of hydrogen and oxygen isotope compositions indicated that the ore‐forming fluids of the tungsten deposit were mainly magmatic water. The ore‐forming age of the Xiaojiashan deposit should to be ~227 Ma. During the ore‐forming process, the magmatic water had separated from magmatic intrusions, and the ore‐bearing complex was taken to a portion where tungsten‐bearing ores could be mineralized. The magmatic fluid was mixed by meteoric water in the late stage.  相似文献